|
Is that 9L or 9qt? I did an oil change recently and it took 9.5 bottles (9.5qt/9L) to get it to the middle of the gauge. I did suction out and clean off all of the old oil in the oil filter housing as well though.
I'd say monitor it the next couple days and try to force measure the oil level reading a few different times, on a level surface of course as Scippy had suggested above.
If it still reads low then, add oil in 1/4 bottle increments and monitor. It does take quite some time for smaller increments to register sometimes, so be sure not to over add.
|