Quote:
Originally Posted by zcp312
Yes! Awesome, guess I got lucky.
|
Nice! One installation tip: Position the elbow with the filter between the plenum and the airbox well seated before tightening the clamps on the rubber connecting piece. If not, the airbox cover might mis-align. Otherwise, the fitment is very tight and superb! Also, you'll need to remove the oem nipple (on the left side wall of the airbox that holds the OEM filter tightly in place) and replace with what comes with the elbow. DYI's out there tells you to remove the box to get to the release clip. However, I used a rubber mallet to gently tap the oem piece out without breaking the tab.
