Quote:
Originally Posted by Julz90
Ordered a new TRSVC from the E70 last night with part number: 66539291386 (last and current generation).
The one from the E84 X1 is too expensive for me personally.
At the CanBus K-Can1 it can not be, And the cables are also properly pinned, otherwise probably no picture would come.
Do you happen to have the part number of the X5 TRSVC where you used then?
Is there a special coding value in the NBT?
Camera_System
TRSVC
Video_watchdog
Thanks for your answers and help
|
I am using E84 PDC. But there is no special coding for NBT. Everything is listed on the DIY will do the trick. Wert values the key. As long as modules are in good shape and coded right you should have an active 3AG . You can test the camera module by hooking up to canbus system and see if it responses. If does then you can look for other areas to figure out the issue! Good luck!