[Space Fox]

Performed a coolant flush over the weekend to prep for my next track day scheduled for October 2nd at Sebring. Car should be all set w/ new brake kit (rotors, calipers, pads, fluid), new tires, new power steering reservoir/fluid, and now new coolant and hardware. Last thing I'm going to do is an air filter recharge for the hell of it.

Went with something like a 70/30 mix of water to coolant as I'm in Florida and we never see freezing temps and if we do I'm not driving in them. Performed an initial flush, filled back with distilled water only, ran the car/heater for 10 min then drained again filling once more with the 70/30 mix. Replaced the coolant drain plug w/ a brass one and the breather screw with a titanium one. Both are common failure points so it was an easy 'while you're in there' item. I also cleaned and coated the felt underbody liner while they were out. They're in pretty good shape all things considered, figured I'd touch them up before eventually replacing w/ one of the aluminum options out there.








Waxed the intake/plenum while in there too



Car is looking STOUT right now. Almost don't want to get it all dirty again on the track. Almost..