|
I absolutely know what you are talking about and I know the document.
I had the same issue when 2 blocks for my stroker engine where damaged. So I had many options for going on. On was the Alusil sleeve which I didn't used in the end. My engine shop which has a high reputation here offers it but doesn't recommend just doing one cylinder on this engine.
How does the Alusil sleeve will hold in place? There is no difference how to insert a iron or alusil sleeve. Cause the sleeve has to be bigger than the bore. The block is heaten up and the sleeve is cooled down.
Kolbenschmidt just say that there is an option to rebuild one cylinder like this and they have the spare parts. They do not recommend this and the don't care about the small wall between the bores. That is always the knowledge of the engine shops what works and what not. In other engines with thick walls I would agree there would almost be no issue when just sleeving one cylinder.
|