|
Tested the breakaway torque today. Happy I did. Something must have been off center as it would not move at 240ftlb. Took it apart, everything looked good. Reassembled and rotated before tightening the hat fully. This seems to center all of the internals properly.
Tightened the hat down fully and tested again. Breakaway was 120ftlb. This seems reasonable as I have found some info that shows the 210mm LSD with 2 clutches should be ~105ftlb.
Carrier should be swapped this coming week so here is hoping that next weekend I can report back how the ZF feels compared to the GKN.
Cheers,
__________________
2011 E92 M3 - 6MT, ZCP, ZF LSD, ESS G1, Some other goodies... |