Quote:
Originally Posted by Jive
I have an BMW INPA K+CAN cable laying around - would you recommend me purchasing the bimmergeek cable for safety purposes? I am not sure of the differences between the cable I have the bimmergeek Pro K+DCAN cable.
|
Quote:
Originally Posted by SYT_Shadow
I would do it. It is not worth risking your ECU
|
Listen to Shadow, get the bimmergeeks cable. I have an perfectly good dcan cable that is capable of coding. Bimmergeeks seems to do everything twice as fast.
I built a power supply from a regulated cb radio power supply and 4 gauge copper jumper cables. Disconnect anything that can draw power prior to coding (after market amps, radar detector). I was surprised at the amp draw for this car.
I used a 75amp regulated power supply at 14.5-14.6V.