Quote:
Originally Posted by deansbimmer
Not sure what bolts you are referring to. Torque to yield bolts must be replaced. Torque specs are listed in TIS. www.newtis.info |
I've searched through TIS, can't seem to find it.
1) If you look at the diagram below there are three bolts to remove the Timing Cover. However there is no notation to designate the middle bolt. Is the middle bolt a 14 (M6X30-U1) or a 15 (M6X25-ZNNIV SI)?
2) What is the torque spec on these bolts, can't find this information anywhere and am pulling my hair out. Thanks!
