Quote:
Originally Posted by Helmsman
Quote:
Originally Posted by premo
I still check the bleed screw while
Its on. This past wknd I did the valve cover seals, spark plugs, alternator, coolant flush, and will do oil change next. Still working on it. I have an ESS 595 kit on my car, so I have an extra coolant pump I installed for the intercooler. I did the procedure and I am fairly certain I heard it operating. I could hear fluid cycling in the coolant reservoir. I haven't started the car yet, as I still have some work to do on it, but I'll check it again.
How does TIS describe the coolant bleed procedure?
I had mine out for a couple years. I didn't notice any heat issues. Also I don't use the res feature at all, probably would be hard in the battery.
|
Heres the TIS mate: https://www.newtis.info/tisv2/a/en/e92-m3-cou/repair-manuals/17-cooling/17-00-cooling-check/Hq5CpsJ
Cheers |
Thanks. Her is a snap of the old pump I removed. The 3 rubber gromets in the back are for mounting it (super easy it just slides in). There is an inlet and output for coolant and an electrical connection.