Quote:
Originally Posted by scotty_miller
Question for the e46 guys on here. Changing up the spring rate and spring heights on my TC Kline DA's with some eibach springs.
Went with front 5.5"x 60mm x 650 in/lbs x 60mm helper with a 10 in/lbs rate
Went with rear 5" x 2.25 x 750 in/lbs with GC weight Jacks
Looking to set the rear up at 12.5 - 12.75 center of fender arch to center of wheel and set the front up at 13 - 13.25 center of fender arch to center of wheel. Running 285/30 R7's and have alignment specs all sorted out.
Any recommendations on the ride height and what others have felt car set up wise with different degrees of rake?
|
I shoot for 13.25F/12.75R. I can't offer any quantitative data to support my decision other than I want to run as low as I can without having front splitter issues.