Quote:
Originally Posted by derbo
Quote:
Originally Posted by EnVe46
Rotate the spacer on the rotor/hub til you can't rock it back and forth. I went thru this as well. So while the spacer is sitting in the rotor, rotate it until it sits flush with no movement. Install wheel and your vibration will be gone.
|
Thanks! However, I noticed my spacer will allow itself to rock no matter what. I tried this with a friend's burger tuning 18mm spacer and was unable to achieve a tight fit as you suggest. .
! |
With the studs out are you able to mount the spacer without any movement? Any chance one of the studs isn't mounted straight or stud itself isn't?