Quote:
Originally Posted by Warpig12354
Did you leave your motor mounts attached to the engine when you re installed or did you swap them to the subframe?
|
I replaced the mounts. At first, I bolted them to the engine brackets, then later loosened them so I could rotate them into place as I was reinstalling the subframe. In hindsight, while it can be done either way, it's probably a little easier to just bolt them to the subframe first. As I was raising the subframe back in place, I discovered the upper mount nuts are easily accessible from the wheel well, so my intial concern I wouldn't be able to get to the top nuts was unfounded.