Quote:
Originally Posted by Talk2meg00se
Quote:
Originally Posted by dreamspeed
The tube is located where I drew the red circle in the back.
The connector on the tube is the same as the connector of the tube I circled in the front.
You need to remove your air box and then you can reach back there to disconnect it.
You squeeze the connector together to release it but depending on the size of your hands and dexterity it could be super easy or a pain in the ass to get loose
|
Why does it make a difference whether you disconnect the tube in the front or the back? The front is a lot easier to reach. |
The tube in the front does something completely different than the one in the back.
If you are having the same issue I had then removing the front tube doesn't do anything.
Search for the throttle actuator diy. I believe that has instructions on how to remove the plenum