Quote:
Originally Posted by Maxe93
Vortech sells the Maxflo bypass to ESS. There are two versions .
Vortech suggest 3 full turns in after it hits the spring plate. MAX 4 turns or you can cause damage. i found better results slightly less then 3 turns.
instructions below. highly doubt ESS will chime in, Id love to see what they suggest.
https://cdn.shopify.com/s/files/1/07...14277669762964 |
When I adjusted it to 3 turns it was making a knocking noise at idle when load from the power steering pump or EVAP system was placed on the engine. I was wondering if ESS may adjust the valve after they receive it from Vortech before they ship it out with their kit.
Quote:
Originally Posted by jdamore
Hope this helps..
|
This does help, thank you. This is an older version of the valve than what I have so I wonder if the set screw adjustment is exactly the same.