Quote:
Originally Posted by rzm3
How easy/hard is replacing the filter?
|
Suction filter (flat filter) is easy....(2) hex screws and it just pops out. Just make sure you spread a little fluid on the O-rings before you insert the new one. The pressure filter is a little annoying....you have to unbolt the two lines going to cooler just to move them out of the way to unscrew cap that also has a C-clip aswell. The cap requires a special tool but I was able to use two flathead screw drivers with a piece of flat metal with two holes drilled in it. Very crude to say the least. All in all I believe the sketchiest part is knowing if you've put in enough fluid. The process I mentioned in above posts is all I could find.