|
Parts needed for this.
Male Pin - 8 - 12521744078
Female Pin - 8 - 12521740180
Female socket - 2 - 12521740486
Male socket - 2 - 12521740485
Grommets - 16 - 12521748973
(disclaimer these parts worked for my 2012 E92, no idea if they will work on other cars)
24ft of heat resistant wire. I used 16 ga wire rated for use in ovens.
2 of the J-shape o2 bungs, I got the Vibrant 1192 J-Shaped Oxygen Sensor Bung
And lastly two o2 sensor plugs.
The cable parts added up to about $100, $50 for the bungs, $15 for the plugs and my local exhaust shop charged me $20 to weld the bungs on where I marked the x-pipe.
I put another 100 miles of city and highway on the car and still no issues besides loud noises and a big smile.
And yes, there is no chip or code clearer available that will force readiness of the rear sensors(see some claims but zero verifiable info) Basically if you did what I did and paid someone to install it, it would still be cheaper than buying a Delete R.
|