Quote:
Originally Posted by s85e90
You don't need to remove the tires to take apart the wheels. You can just take the faces off and do this yourself. IMO I would rather have the lips cleared also that way you'll never have this issue again.
|
I thought this was the case too. I thought i could just deflate the tires to reduce the pressure on the wheel. Then just remove the face and polish away. But every site that i have read cautions that the seal bwtween the 2 barrels on a 3 piece wheel could be compromised when removing the face.
Even still, this whole raw aluminum lip is a Pain in the A$$. I would want a clear added to just do away with the issue.