Quote:
Originally Posted by pbonsalb
They look like many of the other pictures we have seen. Not among the best, not among the worst. I am no expert, but would not say failure was imminent. On the other hand, 4 of the top halves should areas of much heavier than normal wear, with a hint of copper on the bearing edge on a couple of them. Unfortunately, my pictures came out dark so you may not see much from the attached. As soon as I have some time, I will do a short DIY write up with some better pictures, maybe one of each bearing. Car is back on the road and running fine, filled with Mobil 1 0W40 though I would also consider running a 5W40.
|
Good info, good work, but that is par for the course with you!
