[regular guy]

2AF9 - P0116

2AF9 - P0116
Information saved in	DME
Fault code	2AF9 - P0116
Fault text	Coolant temperature sensor
Fault description	Engine Coolant Temperature Sensor 1 Circuit Range/Performance
Condition for fault identification	Test condition: (Measured value + 20°Kelvin (K_TMOT_SK_DELTA) < oil temperature
	Terminal condition: None
	Voltage condition: None
Condition for fault memory entry	2000 ms
Action in service	1. Check plug and wiring harness,
	2. Replace coolant temperature sensor
Fault effect and breakdown warning	MIL lamp comes on after engine runs 2x / idle may be high for brief period after engine start
Driver information	Warning light: MIL
Service instruction	None

2AF9 - P0117

2AF9 - P0117
Information saved in	DME
Fault code	2AF9 - P0117
Fault text	Coolant temperature sensor
Fault description	Engine Coolant Temperature Sensor 1 Circuit Low
Condition for fault identification	Test condition: Measured value >= 136°C (K_TMOT_DIAG_MAX)
	Terminal condition: None
	Voltage condition: None
Condition for fault memory entry	2000 ms
Action in service	1. Check plug and wiring harness,
	2. Replace coolant temperature sensor
Fault effect and breakdown warning	MIL lamp comes on after engine runs 2x / idle may be high for brief period after engine start
Driver information	Warning light: MIL
Service instruction	None

2AF9 - P0118

2AF9 - P0118
Information saved in	DME
Fault code	2AF9 - P0118
Fault text	Coolant temperature sensor
Fault description	Engine Coolant Temperature Sensor 1 Circuit High
Condition for fault identification	Test condition: Measured value >= 136°C (K_TMOT_DIAG_MAX)
	Terminal condition: None
	Voltage condition: None
Condition for fault memory entry	2000 ms
Action in service	1. Check plug and wiring harness,
	2. Replace coolant temperature sensor
Fault effect and breakdown warning	MIL lamp comes on after engine runs 2x / idle may be high for brief period after engine start
Driver information	Warning light: MIL
Service instruction	None

2AF9 - P3198

2AF9 - P3198
Information saved in	DME
Fault code	2AF9 - P3198
Fault text	Coolant temperature sensor
Fault description	Engine Coolant Temperature 1 Gradient Too High
Condition for fault identification	Test condition: Measured value gradient > 1 K/100 ms (K_TMOT_DIAG_GRAD_MAX)
	Terminal condition: None
	Voltage condition: None
Condition for fault memory entry	2000 ms
Action in service	1. Check plug and wiring harness,
	2. Replace coolant temperature sensor
Fault effect and breakdown warning	MIL lamp comes on after engine runs 2x / idle may be high for brief period after engine start
Driver information	Warning light: MIL
Service instruction	None