Quote:
Originally Posted by tdott
I will soon be installing coilovers on my e92. I will need to disable my EDC.
Been doing some research and digging with NCS and haven't found a way to do so yet. I read the EDC module and didn't seem as easily as setting something from aktiv to nicht_aktiv. It's all a bunch of hex values.
Anyone have any tips on how to do this?
|
Its very easy.
Physically unplug the module in the trunk.
Remove $223 from the VO and code CAS and NFRM with the new VO
code the edc-related options in the Kombi and CIC to nicht_aktiv (if you dont have a CIC then i believe its in CAPPL)
After that i cleared error codes in INPA but that probably isnt even necessary.