[regular guy]

2724 - P0132

2724 - P0132
Information saved in	DME
Fault code	2724 - P0132
Fault text	Oxygen sensor, signal before cat., bank 1
Fault description	O2 Sensor Circuit High Voltage (Bank 1 Sensor 1)
Condition for fault identification	Test condition: lavk_atic42_pin_diag_b1 BIT1 or BIT3 or BIT5 or BIT7 set
	Terminal condition: none
	Voltage condition: none
Condition for fault memory entry	3000 ms
Action in service	1. Check plug and wiring harness on pre-cat oxygen sensor LSVK B1,
	2. If OK replace oxygen sensor
Fault effect and breakdown warning	MIL on after engine runs 2x
Driver information	Warning light: MIL
Service instruction	None