12-25-2013, 07:10 PM
|
#11
|
#tunaonwhite
Drives: 2011 Alpine White M3
Join Date: Apr 2013
Location: Albuquerque
|
Quote:
Originally Posted by regular guy
This is unrelated to this thread, but somebody asked me about it. Going to tag it here so people can look up by code later.
273C - P2414 | | Information saved in | DME | Fault code | 273C - P2414 | Fault text | Oxygen sensor, part/full-load diagnosis, before cat., bank 1 | Fault description | O2 Sensor Exhaust Sample Error (Bank 1 Sensor 1) | Condition for fault identification | Test condition: Oxygen sensor voltage less than 4800 mV (K_LAVK_OBD_TL_SCHW_MAX) and greater than 3149 mV (K_LAVK_OBD_TL_SCHW_MIN) for a total of 1 (K_LAVK_OBD_TL_CNT) after a lag period before active functionality of 8s (K_LAVK_OBD_TL_T) seconds | . | Terminal condition: Engine running - Condition part-load or full-load | . | Voltage condition: None | Condition for fault memory entry | K_LAVK_OBD_TL_T- seconds (8s) lag frr K_LAVK_OBD_TL_CNT-attempts (1x) | Action in service | 1. Install oxygen sensor in exhaust system (oxygen sensor exposed to ambient air) | Fault effect and breakdown warning | MIL on after engine runs 2x Possible negative effects on drivability | Driver information | Warning light: MIL | Service instruction | None |
|
|
|
|