|
I just replaced mine tonight. I did so with the sunroof glass still installed. I just alternated between the tilted and a slightly open position to be able to remove/reinstall the gasket on all the edges.
Tips:
(1) Take note of the proper orientation of the gasket upon removal. There is a top and bottom. Be sure to reinstall the new one in the same way.
(2) Don't try to get too much out if the gasket early on reinstallation. I certainly didn't pull too much on it but yet I ended up with slack on the tail end which I then had to work back out before I could button it up.
(3) If using any implement to reinsert/push the gasket into the edge of the glass, be careful not to puncture the edge of the gasket. Use a blunt tool to help with the task. I inadvertently added a small puncture to one corner of my replacement gasket.
Good luck! PM me if you have any questions.
|