Quote:
Originally Posted by alpina527
My LC2i and JL400/4 is set almost the same as kmerai. Mine is running through the main channels, not the bass channel.
It's the premium system with Technic harness and simply powering a pair of SWS-8s. It all runs cool with no glitches at all.
This might sound dumb, but have you checked the speaker outputs from the Technic harness.?
When I got mine, it had an old diagram of the wire configuration out of the harness and into the amp which was wrong. This gave me all sorts of problems. Once he sent me the revised wiring it's been perfect.
Perhaps Technic could post up a fool proof diagram of the four speaker wires.
|
The diagram mistake was in the underseat woofer pigtail and that was resolved after you pointed it out in the diagram.
The pigtail is not used in either case here...