Have a complete kit here to retrofit F8x M3/M4 brakes onto E9x M3. Brakes are used take-offs from a 66k car, likely original units. Everything is in good shape, no issues.
-Brembo Calipers w/ pads
-380/370mm Rotors
-Front Spindles/Hubs/Dust Shields
-Front ABS Sensors (splice onto E9x sensor)
All you will need is 8 washers from home depot or any hardware store for correctly spacing the rear calipers. Also rear dust shields will need to be trimmed. I'll also include (x10) lug bolts for the front hubs.
$2500 firm.
-Brembo Calipers w/ pads
-380/370mm Rotors
-Front Spindles/Hubs/Dust Shields
-Front ABS Sensors (splice onto E9x sensor)
All you will need is 8 washers from home depot or any hardware store for correctly spacing the rear calipers. Also rear dust shields will need to be trimmed. I'll also include (x10) lug bolts for the front hubs.
$2500 firm.
