BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Wash, Wax, Detail, Cosmetic Maintenance & Repairs
 
Post Reply
 
Thread Tools Search this Thread
      09-08-2013, 11:05 AM   #1
UTurnFactory
Enlisted Member
 
Drives: 2008.06 E93 M3
Join Date: Oct 2012
Location: United_States

Posts: 49
iTrader: (4)

Due to an extremely foolish mistake on my part (still kicking myself in disappointment), I managed to dent the edge of the driver's side door on my Silverstone II E93 M3.

The sheer emotion of distress at my own failure was difficult enough to overcome, but upon doing some research on my own and using a rubber mallet, a plank of wood, and a hot hair dryer to prevent paint from chipping, it dawned on me that molding the sheet metal in that area was no easy task. My determination did net me at least one win: the interior door card was pretty badly damaged, and the little plastic unlock/lock pin that pops up and down had completely fallen out unto the ground. I found a handy guide here: http://www.e90post.com/forums/showpo...19&postcount=8, took apart the door card, and completely repaired everything within - a small victory.

I was wondering if anyone else has had a similar experience, or if anyone has any tips for effective solutions to at least mitigate this terrible, self-inflicted eyesore?

I'm definitely not expecting it to be brought back to perfection, but I wanted to try and at least reduce the severity of the dent - I've thought about body shop + repainting, but blending the Silverstone II metallic color is very tricky, and I'm willing to just live with a small dent on my door edge, if it affords me the opportunity to get around the need to repaint. Thankfully, none of the paint in the area has chipped, and although the very leading edge of the panel has its paint scraped off, the primer is still there - meaning no rust worries for now.

Philosophically, I felt that I should probably leave the damage as it is, as a very personal reminder that even the most coveted of material possessions are just as mortal and vulnerable to any sort of mistakes as humans are... but then again, it is my beautiful M3.

I'd be enormously grateful for any helpful tips, or referrals to professional body panel restorers near the New York City area sans the requirement to repaint...

Last edited by UTurnFactory; 09-08-2013 at 11:25 AM.
UTurnFactory is offline   United_States
0
Reply With Quote
      09-08-2013, 11:06 AM   #2
UTurnFactory
Enlisted Member
 
Drives: 2008.06 E93 M3
Join Date: Oct 2012
Location: United_States

Posts: 49
iTrader: (4)

Pictures attached...
Attached Images
    

Last edited by UTurnFactory; 09-08-2013 at 11:19 AM.
UTurnFactory is offline   United_States
0
Reply With Quote
      09-08-2013, 11:08 AM   #3
///M Power-Belgium
Brigadier General
 
///M Power-Belgium's Avatar
 
Drives: ///M3-DCT- E92 Silverstone II
Join Date: Jul 2012
Location: Belgium

Posts: 3,630
iTrader: (0)

Quote:
Originally Posted by UTurnFactory View Post
Pictures attached...
See no pics
__________________
BPM DEV-Tune & DCT software & Servotronic & coding///Alpine HID Angeleyes///Oem.exhaust mod.[/size]
///M Power-Belgium is offline   Belgium
0
Reply With Quote
      09-08-2013, 12:22 PM   #4
rjd598
Brigadier General
 
rjd598's Avatar
 
Drives: 10' M3
Join Date: Jan 2009
Location: San Diego,CA

Posts: 4,596
iTrader: (2)

Garage List
2010 BMW M3  [4.50]
1999 BMW M3  [0.00]
pics work fine
__________________
rjd598 is offline   United_States
0
Reply With Quote
      09-08-2013, 12:53 PM   #5
///M Power-Belgium
Brigadier General
 
///M Power-Belgium's Avatar
 
Drives: ///M3-DCT- E92 Silverstone II
Join Date: Jul 2012
Location: Belgium

Posts: 3,630
iTrader: (0)

See pics now....the only solution is a very good body shop !
__________________
BPM DEV-Tune & DCT software & Servotronic & coding///Alpine HID Angeleyes///Oem.exhaust mod.[/size]
///M Power-Belgium is offline   Belgium
0
Reply With Quote
      09-09-2013, 12:24 PM   #6
thekurgan
Bad Lieutenant
 
thekurgan's Avatar
 
Drives: E90M3
Join Date: Aug 2007
Location: Sacramento

Posts: 2,750
iTrader: (0)

Garage List
2008 BMW M3  [0.00]
Agree on the good body shop; I've heard of heat being used for things like this and luckily it's not damaged the crease too badly.
__________________

08 E90M3 6MT Alpinweiss/Carbon/BMW Pedals/Dinan Exhaust/Rattle fixes
thekurgan is offline   United_States
0
Reply With Quote
      09-09-2013, 08:45 PM   #7
edwinm3
Lieutenant Colonel
 
edwinm3's Avatar
 
Drives: E92 MELBOURNE RED M3
Join Date: Nov 2011
Location: Doral

Posts: 1,828
iTrader: (8)

It's not that bad, but take it to a body shop so they can work it right, whatever you do don't bang on it yourself
__________________
edwinm3 is offline   United_States
0
Reply With Quote
      09-09-2013, 10:01 PM   #8
W///
Major General
 
W///'s Avatar
 
Drives: 2008 E92 M3/1999 E36 M3 Coupe
Join Date: Sep 2011
Location: SC

Posts: 5,022
iTrader: (12)

Quote:
Originally Posted by edwinm3 View Post
It's not that bad, but take it to a body shop so they can work it right, whatever you do don't bang on it yourself
+1. This damage is way too much for a DIY job in your garage. Live and learn my friend.
__________________
2008 E92 M3: Sparkling Graphite | Bamboo Beige | 6MT | CF Roof | HRE | Catless Eisenmann Race | BPM Sport | Swift | Arkym | Mode Carbon | M.Perf
W/// is offline  
0
Reply With Quote
      09-10-2013, 01:33 AM   #9
euro*
Private First Class
 
euro*'s Avatar
 
Drives: E92 M3
Join Date: Nov 2012
Location: Toronto

Posts: 191
iTrader: (3)

The solutions with making it less visible and straightening it out, are just temporary, they will never look good, and will always be an eyesore. Especially in that spot?

Get it done properly, in a good body shop, and move on. Silverstone is a little bit trickier, and takes more effort to match, but i would not be worried about it, if it is a reputable body shop (i worked many years in this field).

Goodluck with everything, and im sorry to hear.
euro* is offline   Canada
0
Reply With Quote
      09-10-2013, 04:30 PM   #10
UTurnFactory
Enlisted Member
 
Drives: 2008.06 E93 M3
Join Date: Oct 2012
Location: United_States

Posts: 49
iTrader: (4)

everyone for your thoughts - I appreciate the feedback... still mulling on what to do - trying to find some solid body shops in the NY/tri-state area.

A paintless dent repair (PDR) business from Whitestone, NY is asking $225 after I texted them pictures of the damage - apparently they're pretty famous, but what v_bimmer says above rings truth in my ears...

Out of curiosity (trying to weigh all options here), has anyone had any experience with PDR for damage of this type (edge of body panels...)?
UTurnFactory is offline   United_States
0
Reply With Quote
      09-11-2013, 12:33 PM   #11
W///
Major General
 
W///'s Avatar
 
Drives: 2008 E92 M3/1999 E36 M3 Coupe
Join Date: Sep 2011
Location: SC

Posts: 5,022
iTrader: (12)

Quote:
Originally Posted by UTurnFactory View Post
everyone for your thoughts - I appreciate the feedback... still mulling on what to do - trying to find some solid body shops in the NY/tri-state area.

A paintless dent repair (PDR) business from Whitestone, NY is asking $225 after I texted them pictures of the damage - apparently they're pretty famous, but what v_bimmer says above rings truth in my ears...

Out of curiosity (trying to weigh all options here), has anyone had any experience with PDR for damage of this type (edge of body panels...)?
This seems way too severe for PDR, but I'm no expert.

I don't know your location, but try Martino Auto Concept. I think they are sponsors here and they've had some pretty crazy projects.

IMHO, do it right first time.
__________________
2008 E92 M3: Sparkling Graphite | Bamboo Beige | 6MT | CF Roof | HRE | Catless Eisenmann Race | BPM Sport | Swift | Arkym | Mode Carbon | M.Perf
W/// is offline  
0
Reply With Quote
      09-13-2013, 12:47 PM   #12
slicer
Brigadier General
 
slicer's Avatar
 
Drives: '13 E92 M3
Join Date: Jan 2009
Location: San Diego, CA

Posts: 3,745
iTrader: (12)

Just take it to a body shop and get it fixed right. Stuff happens.... This is in a location that you are going to see every time you get into the car. I have lived with dents / scratches in the past (none this bad). I then fixed them before selling the car. After doing so I asked myself why I would live with the damage when I was going to get it fixed in the future.... Why not fix it now and enjoy the results vs. doing it for the next owner? As far as paint match... A quality body shop will have no problems. Plus I would rather have a bad paint match than that nasty looking dent and scratch.
__________________
KW Clubsport 3-way, Akrapovic Evolution, ESS Tune, StopTech Trophy, IND Euro Bumper & Black Mirror Covers, Turner Motorsports Studs/Lugs & Delrin Diff Bushings, MRF Solid Sub-Frame Bushings, RD Sport Sways, Recaro Profi-XL & Planted Seat Brackets, BMW Performance Carbon Fiber Interior Trim, BMW Edition Grills/Gills, Mode Carbon GT4 Splitter & GTS Wing, Advan TC3 (18x9.5/10.5), BBS E05 (18x10/11), G-Force Rivals (275/295)
slicer is offline  
0
Reply With Quote
      09-15-2013, 02:31 PM   #13
UTurnFactory
Enlisted Member
 
Drives: 2008.06 E93 M3
Join Date: Oct 2012
Location: United_States

Posts: 49
iTrader: (4)

to all who've responded - I respect everyone's feedback and am thankful - I've made my decision, since the general consensus here is to get it done right - JMK BMW's bodyshop seemed like a good place to start, as they're the closest BMW-certified repair center in the tri-state area...
UTurnFactory is offline   United_States
0
Reply With Quote
      09-15-2013, 02:38 PM   #14
edwinm3
Lieutenant Colonel
 
edwinm3's Avatar
 
Drives: E92 MELBOURNE RED M3
Join Date: Nov 2011
Location: Doral

Posts: 1,828
iTrader: (8)

Quote:
Originally Posted by UTurnFactory
to all who've responded - I respect everyone's feedback and am thankful - I've made my decision, since the general consensus here is to get it done right - JMK BMW's bodyshop seemed like a good place to start, as they're the closest BMW-certified repair center in the tri-state area...
Glad you decided right
__________________
edwinm3 is offline   United_States
0
Reply With Quote
      09-18-2013, 08:21 PM   #15
DetailersDomain
BimmerPost Supporting Vendor

 
DetailersDomain's Avatar
 
Drives: 15 MW M3
Join Date: Nov 2008
Location: New Jersey

Posts: 3,694
iTrader: (22)

get a really good dent guy to fix it he/she should be able to make that look perfect.
then with the paint get a good person to blend and paint it. go to a dent guy first.
DetailersDomain is offline   United_States
0
Reply With Quote
      09-18-2013, 08:22 PM   #16
DetailersDomain
BimmerPost Supporting Vendor

 
DetailersDomain's Avatar
 
Drives: 15 MW M3
Join Date: Nov 2008
Location: New Jersey

Posts: 3,694
iTrader: (22)

wow your in NJ, wish I saw this we have a great dent guy that I can send you his info.
DetailersDomain is offline   United_States
0
Reply With Quote
Post Reply

Bookmarks

Tags
bent, dent, door, panel, repair

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 03:48 AM.




m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST