BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Engine, Transmission, Exhaust, Drivetrain, ECU Software Modifications
 
Post Reply
 
Thread Tools Search this Thread
      09-05-2013, 10:09 PM   #1
Fen335i
Captain
 
Fen335i's Avatar
 
Drives: e92 M3 / Z4 M Roadster
Join Date: Jun 2008
Location: Pacific Northwest

Posts: 783
iTrader: (0)

Help: another error code: P0092

Hi Folks - I cleared my first cel a couple weeks ago and all has been fine...until two days ago when I got a 2nd CEL, but this one is different than the first (first one: P0175). The latest one is: P0092 - "Fuel Pressure Reg 1 Control Circuit High".

Anyone know what this is caused by? Is it related to the other code? I did a search and some are recommending a low fuel pressure sensor to be replaced...about a $85 part that looks like a pretty straight forward installation. But before I order the part I'd like some additional data to backup this is what's truly needed. Anyone have any insight to P0092 error code?

Thx.
Fen335i is offline  
0
Reply With Quote
      09-06-2013, 02:26 AM   #2
Dave07997S
Colonel
 
Drives: 2013 BMW M3 ZCP Coupe
Join Date: May 2009
Location: Playa del Rey, CA

Posts: 2,383
iTrader: (1)

Quote:
Originally Posted by Fen335i View Post
Hi Folks - I cleared my first cel a couple weeks ago and all has been fine...until two days ago when I got a 2nd CEL, but this one is different than the first (first one: P0175). The latest one is: P0092 - "Fuel Pressure Reg 1 Control Circuit High".

Anyone know what this is caused by? Is it related to the other code? I did a search and some are recommending a low fuel pressure sensor to be replaced...about a $85 part that looks like a pretty straight forward installation. But before I order the part I'd like some additional data to backup this is what's truly needed. Anyone have any insight to P0092 error code?

Thx.
A P0092 is usually a bad pressure regulator or the harness is not connected all the way or there is a short. If you are running rich cause of it, that could have played into the first code you got.

Dave
__________________
2013 M3 Coupe-MR/BLK ZCP, ACM test pipes, BPM Stg2 dev. tune and Megan catback, more to come
Previous rides: 2011 M3 Coupe-MR/Blk
2007 Porsche 997C2S Speed Yellow/Blk sport seats
2004 BMW M3 Imola/Blk
Dave07997S is offline  
0
Reply With Quote
      09-06-2013, 08:38 AM   #3
Fen335i
Captain
 
Fen335i's Avatar
 
Drives: e92 M3 / Z4 M Roadster
Join Date: Jun 2008
Location: Pacific Northwest

Posts: 783
iTrader: (0)

Quote:
Originally Posted by Dave07997S View Post
A P0092 is usually a bad pressure regulator or the harness is not connected all the way or there is a short. If you are running rich cause of it, that could have played into the first code you got.

Dave
Thanks Dave. When you say it's the pressure regulator, I assume you mean it's what BMW calls the "low fuel pressure sensor"? In particular, this one here:

http://www.turnermotorsport.com/p-20...1-f10-f12.aspx
Fen335i is offline  
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 07:18 PM.




m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST