BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > M3 Marketplace > SPONSORS Classifieds/Groupbuys/Specials Area > Engine | Drivetrain | Exhaust
 
EXXEL Distributions
Post Reply
 
Thread Tools Search this Thread
      08-25-2015, 03:03 PM   #1
supremepower
BimmerPost Supporting Vendor
supremepower's Avatar
United_States
1243
Rep
6,182
Posts


Drives: 991S, M6, F80 M3, Rubicon
Join Date: Jun 2006
Location: so cal

iTrader: (15)

Send a message via AIM to supremepower Send a message via MSN to supremepower
SUPREME POWER l ESS Tuning Supercharger *In stock/Install Special*

SUPREMEPOWER
1025-B Ortega Way
Placentia CA 92870
(714)632-1951
sales@supremepower.com



ESS Tuning VT2-595



The entry-level intercooled E9X M3 VT2-595 supercharger system produces 595hp and 395lb-ft of torque at 6psi of boost. A 181hp gain over stock, which is more than a Ferrari 458 Italia. Featuring the newly developed, self contained Vortech V3 supercharger unit in Si trim, the supercharger is capable of producing up to 775hp.
The VT2-595 comes with the largest capacity liquid intercooler system on the market integrated within a specially developed cast aluminum intake manifold assembly ‘ribbed’ with optimized runners and velocity stacks. This ensures the intake charge temps remain in check during prolonged use on the track, autobahn, or street. The manifold was designed not only for optimum flow, but for minimal weight to not disrupt the iconic handling balance of the M3
The supercharger system includes the ESS E-Flash OBD2 cable and specific ESS MSS60 engine software that is perfectly calibrated for the VT2-595 supercharged engine providing optimum ignition timing under all conditions, recalibrated EGA's for quicker throttle response, recalibrated VANOS control, and perfectly optimized fuel delivery. The E-Flash allows the end user to upload the supercharger ECU software from any PC running Windows XP or newer and includes a full diagnostic and code clearing capability. Any future ESS software updates can be received by email and loaded directly to the car. The stock ECU software will be saved and can easily be restored in the future.
Power delivery is 100% smooth and OEM-caliber. The car behaves just like stock until you demand power, then the car completely transform providing brutal acceleration normally reserved for pure race cars.

The system maintains all OBD-II functions and it is backed by a comprehensive 2 year, unlimited mileage warranty program. The system takes 8-14 hours to install using normal hand tools and no irreversible modifications to the car are necessary.

VT2-595: Intercooled, 6PSI system compatible with DCT and manual cars. 91AKI/95RON or above required.

System components:
-Vortech V3 Si-trim supercharger unit.
-Cast aluminum ESS intake manifold with integrated velocity stacks optimized for boost.
-High capacity liquid intercooler system (VT2 only).
-Vortech Maxflow Race bypass assembly.
-High temperature casted plastic intake system for SC -Uni-belt drive system with additional OEM quality rollers.-Heavy-Duty drive belt.
-CNC hard anodized brackets and hardware.-High temperature silicone hoses with clamps
-ESS oil breather assembly designed for boost.
-8 larger Bosch Motorsport fuel injectors, 550/595 spec.
-K&N high flow air filter.
-ESS E-Flash reprogramming and diagnostic interface.
-Perfectly optimized, dyno tweaked VT2-595 spec MSS60 ECU software with removed top speed governor, calibrated for Spec 2 injectors.
-Detailed, step-by-step installation manual.
-All installation hardware included
-2yr./unlimited mileage warranty.

Installation time: 8-14 hours

VT2-595 specs:
Boost pressure: 6 PSI Intercooled
Horsepower: 595 SAE (~43% gain over stock)
Torque on: 395 ft/lbs
Correction factor for drivetrain loss is 15% above RWHP as seen in dynograph (RWHP/0.85)
Application intended for: E90 M3, E92 M3, E93 M3 from 2008-2013
California – For off-road use only.

ESS Tuning VT2-625



The mid-level intercooled E9X M3 VT2-625 supercharger system produces 625hp and 410lb-ft of torque at 6.5-7psi of boost. A 211hp gain over stock, which is more than a Mercedes SLS Black Series. Featuring the newly developed, self contained Vortech V3 supercharger unit in Si trim, the supercharger is capable of producing up to 775hp. The VT2-625 comes with the largest capacity liquid intercooler system on the market integrated within a specially developed cast aluminum intake manifold assembly ‘ribbed’ with optimized runners and velocity stacks. This ensures the intake charge temps remain in check during prolonged use on the track, autobahn, or street. The manifold was designed not only for optimum flow, but for minimal weight to not disrupt the iconic handling balance of the M3 The supercharger system includes the ESS E-Flash OBD2 cable and specific ESS MSS60 engine software that is perfectly calibrated for the VT2-625 supercharged engine providing optimum ignition timing under all conditions, recalibrated EGA's for quicker throttle response, recalibrated VANOS control, and perfectly optimized fuel delivery. The E-Flash allows the end user to upload the supercharger ECU software from any PC running Windows XP or newer and includes a full diagnostic and code clearing capability. Any future ESS software updates can be received by email and loaded directly to the car. The stock ECU software will be saved and can easily be restored in the future. Power delivery is 100% smooth and OEM-caliber. The car behaves just like stock until you demand power, then the car completely transform providing brutal acceleration normally reserved for pure race cars.

The system maintains all OBD-II functions and it is backed by a comprehensive 2 year, unlimited mileage warranty program. The system takes 8-14 hours to install using normal hand tools and no irreversible modifications to the car are necessary.

VT2-625: Intercooled, 6.5-7PSI system compatible with manual and DCT. 91AKI/95RON or above required. *HFC or cat-delete mid section recommended.

System components:
-Vortech V3 Si-trim supercharger unit.
-Cast aluminum ESS intake manifold with integrated velocity stacks optimized for boost.
-High capacity liquid intercooler system (VT2 only).
-Vortech Maxflow Race bypass assembly.
-High temperature casted plastic intake system for SC -Uni-belt drive system with additional OEM quality rollers.-Heavy-Duty drive belt.
-CNC hard anodized brackets and hardware.-High temperature silicone hoses with clamps
-ESS oil breather assembly designed for boost.
-8 larger Bosch Motorsport fuel injectors, 625 spec.
-K&N high flow air filter.
-ESS E-Flash reprogramming and diagnostic interface.
-Perfectly optimized, dyno tweaked VT2-625 spec MSS60 ECU software with removed top speed governor, calibrated for Spec 2 injectors.
-Detailed, step-by-step installation manual.
-All installation hardware included
-2yr./unlimited mileage warranty.

Installation time: 8-14 hours

VT2-625 specs:
Boost pressure: 6.5-7 PSI Intercooled
Horsepower: 625 SAE (~50% gain over stock)
Torque on: 410 ft/lbs Correction factor for drivetrain loss is 15% above RWHP as seen in dynograph (RWHP/0.85)
Application intended for: E90 M3, E92 M3, E93 M3 from 2008-2013
California – For off-road use only.

ESS Tuning VT2-650



The top-level intercooled E9X M3 VT2-650 supercharger system produces 650hp and 420lb-ft of torque at 8psi of boost. A 236hp gain over stock. Featuring the newly developed, self contained Vortech V3 supercharger unit in Si trim, the supercharger is capable of producing up to 775hp. The VT2-650 comes with the largest capacity liquid intercooler system on the market integrated within a specially developed cast aluminum intake manifold assembly ‘ribbed’ with optimized runners and velocity stacks. This ensures the intake charge temps remain in check during prolonged use on the track, autobahn, or street. The manifold was designed not only for optimum flow, but for minimal weight to not disrupt the iconic handling balance of the M3 The supercharger system includes the ESS E-Flash OBD2 cable and specific ESS MSS60 engine software that is perfectly calibrated for the VT2-650 supercharged engine providing optimum ignition timing under all conditions, recalibrated EGA's for quicker throttle response, recalibrated VANOS control, and perfectly optimized fuel delivery. The E-Flash allows the end user to upload the supercharger ECU software from any PC running Windows XP or newer and includes a full diagnostic and code clearing capability. Any future ESS software updates can be received by email and loaded directly to the car. The stock ECU software will be saved and can easily be restored in the future. Power delivery is 100% smooth and OEM-caliber. The car behaves just like stock until you demand power, then the car completely transform providing brutal acceleration normally reserved for pure race cars.

The system maintains all OBD-II functions and it is backed by a comprehensive 2 year, unlimited mileage warranty program. The system takes 8-14 hours to install using normal hand tools and no irreversible modifications to the car are necessary.

VT2-650: Intercooled, 8PSI system compatible with manual cars (or DCT cars with BMW software release 12/2010 or later, or must have ESS DCT Performance Transmission Software installed). 91AKI/95RON or above required. *HFC or cat-delete mid section recommended.

System components:
-Vortech V3 Si-trim supercharger unit.
-Cast aluminum ESS intake manifold with integrated velocity stacks optimized for boost.
-High capacity liquid intercooler system (VT2 only).
-Vortech Maxflow Race bypass assembly.
-High temperature casted plastic intake system for SC -Uni-belt drive system with additional OEM quality rollers.-Heavy-Duty drive belt.
-CNC hard anodized brackets and hardware.-High temperature silicone hoses with clamps
-ESS oil breather assembly designed for boost.
-8 larger Bosch Motorsport fuel injectors, 650 spec.
-K&N high flow air filter.
-ESS E-Flash reprogramming and diagnostic interface.
-Perfectly optimized, dyno tweaked VT2-650 spec MSS60 ECU software with removed top speed governor, calibrated for Spec 3 injectors.
-Detailed, step-by-step installation manual.
-All installation hardware included
-2yr./unlimited mileage warranty.

Installation time: 8-14 hours

VT2-650 specs:
Boost pressure: 8 PSI Intercooled
Horsepower: 650 SAE (~57% gain over stock)
Torque on: 420 ft/lbs Correction factor for drivetrain loss is 15% above RWHP as seen in dynograph (RWHP/0.85)
Application intended for: E90 M3, E92 M3, E93 M3 from 2008-2013


Ordering:

Mounting & Balancing:
Expect perfection: All orders include complimentary mounting and balancing on our Corghi Artigulo 50 Touchless Mounter and Hunter Engineering 9700 Road Force Balancer

Shipping:
Perfect tire and wheel packages delivered consistently. All wheel and tire packages are boxed and handled with care. No stapping. No cardboard on faces. Extra Heavy Duty Boxes surround your purchase and ensure delivery to your door in perfect condition. No cutting corners here.

Phone:
You may call us at 714-632-1951 to place your order over the phone.

Payment:
Credit/Debit Cards: Visa, Mastercard, Discover, Amercan Express. (avail online & over phone)

Other Payments:
Money Order/Cashier’s Check & Bank Wire Transfer are also available. Please contact us to pay with either of these methods.

Tax:
All CA customers will be charged 8.75% CA Sales tax.

Shipping:
All orders will be shipping via Fedex. If you are interested in shipping to Hawaii, Alaska, Puerto Rico and Canada, please call us. You will be charged additional shipping fees. International shipping is available at reasonable prices, please contact us for shipping quotes.

Hours of Operations:
Monday - Friday from 9AM to 6PM PST
Saturday by Appointment
Sundays we are closed

Retail Showroom and Installation Center:
Come check out our 10000 square foot facility in Placentia, CA. We install everything we sell.

Contact Info:
Phone: 714-632-1951
Email: sales@supremepower.com
Website: http://www.supremepower.com

If you have any questions, please feel free to PM, email or call us anytime and we will do our best to get you the info you are needing.
Appreciate 0
      06-16-2016, 05:28 PM   #2
ssinE92m3
Private
2
Rep
65
Posts

Drives: 2011 BMW M3 ZCP
Join Date: Sep 2015
Location: Walnut,CA

iTrader: (0)

pm me price for ess 625 installed.
Appreciate 0
      06-16-2016, 10:23 PM   #3
supremepower
BimmerPost Supporting Vendor
supremepower's Avatar
United_States
1243
Rep
6,182
Posts


Drives: 991S, M6, F80 M3, Rubicon
Join Date: Jun 2006
Location: so cal

iTrader: (15)

Send a message via AIM to supremepower Send a message via MSN to supremepower
Quote:
Originally Posted by ssinE92m3 View Post
pm me price for ess 625 installed.
PM'd
Appreciate 0
      06-19-2016, 03:15 PM   #4
Mxpro125
New Member
0
Rep
10
Posts

Drives: '11 ZCP M3 DCT on BBS CHRs
Join Date: Jan 2014
Location: Scottsdale, AZ

iTrader: (0)

Ess 625 installed please
Appreciate 0
      06-20-2016, 10:00 PM   #5
supremepower
BimmerPost Supporting Vendor
supremepower's Avatar
United_States
1243
Rep
6,182
Posts


Drives: 991S, M6, F80 M3, Rubicon
Join Date: Jun 2006
Location: so cal

iTrader: (15)

Send a message via AIM to supremepower Send a message via MSN to supremepower
Quote:
Originally Posted by Mxpro125 View Post
Ess 625 installed please
PM on the way!
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 05:05 PM.




m3post
m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST