BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read

Go Back   M3Post - BMW M3 Forum > M3 Marketplace > SPONSORS Classifieds/Groupbuys/Specials Area > Suspension | Brakes | Chassis | Handling
Evolve Automotive
Post Reply
Thread Tools Search this Thread
      08-26-2015, 11:33 AM   #1
BimmerPost Supporting Vendor
Cat@IND's Avatar

Drives: E91 328, E36 M3 x 2, E30 325
Join Date: Mar 2013
Location: Chicago

iTrader: (1)

IND | Fall Line Motorsports E9X M3 Rear Camber Shim Kit

When setting an M3 for high performance driving, properly setting the rear camber and toe will yield significant results. The factory eccentric suspension bolts have a reasonable amount of adjustment range for a variety of ride heights and possible alignment settings, but are not a perfect solution.

Eccentric bolts are adjusted by rotating the bolt within the suspension arm, which causes two major issues:

The first is that tightening the bolt into place will inevitably change the alignment. As you turn the nut to clamp the bolt into position, alignment will change slightly from the intended setting, losing precision.

The second issue is that as high loads are applied, the bolt will tend to slip from its pre-set position, creating alignment changes while the car is being driven around the race track which are frustrating at best, and unpredictable and dangerous at worst. Such movement of the factory eccentric bolt has been documented by Fall Line Motorsports in their many years of professional racing.

The rigid camber shims will allow a technician to precisely set camber by choosing one of 5 shim offsets to install in the rear suspension. The shims can be used in either the normal orientation, or flipped, resulting in 9 different positions, divided into 1mm increments. This will give an exact camber setting, and ensures absolutely no change in alignment even in the harshest driving conditions.

Fall Line Motorsports E9X M3 Rear Camber Shim Kit $165

Please contact IND by phone or email for more information or to place your order.
866.963.4520 |

The Fall Line Motorsports E9X M3 Rear Camber Shim Kit may be viewed here in our online store:

Appreciate 0
      Yesterday, 05:50 PM   #2
BimmerPost Supporting Vendor
IND-Distribution's Avatar

Drives: F82 M4
Join Date: Oct 2006
Location: Chicago

iTrader: (3)

In stock and ready to go.

Appreciate 0
Post Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 09:04 AM.

Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.,,,,,,,,, logo and trademark are properties of BIMMERPOST