BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > DIY Guides/ Discussions
 
Post Reply
 
Thread Tools Search this Thread
      06-01-2011, 01:14 PM   #1
rye m3
Lieutenant
 
rye m3's Avatar
 
Drives: 2011.75 E92 M3
Join Date: Apr 2011
Location: New York

Posts: 489
iTrader: (2)

DIY splitter install??? Need a tip

Should be incredibly easy. Saw a video showing drilling the second hold and then using a clip "screw nut". Does anyone know where to get those? Anyone else installed and had any issues?
__________________
E92 M3 MR on Red/Black ZCP Sound
Carbon

2007 997S - sold
2003 E46 M3 Steel Grey on Red- sold
1997 E36 M3 Arctic Silver on Black- sold
rye m3 is offline   Switzerland
0
Reply With Quote
      06-01-2011, 04:44 PM   #2
Longbow64
_______
 
Longbow64's Avatar
 
Drives: 09 E90 M3, 13 X3 35i MSport
Join Date: Apr 2008
Location: Orlando

Posts: 742
iTrader: (4)

On my E90, one hole lined up with a pre-drilled hole. For the second hole I used the two screw nuts that were near where the new holes go. Just drilled it, then screwed those in. Pretty simple. I used 3M double sided tape instead of the betalink as well.
__________________

'09 E90 M3 | VF620 SC tuned and coded by BPM | KW V3 | ARC Wheels w/AD08 | OnEighty Lights | AA Signature Exhaust | BMW Performance and IND trim | Recaro Profi and child seats
'13 35i M-Sport X3 | JB4 Stage 1 | BMS Intake | H&R Springs | Gloss black grill | CF Wrap and Coded by me
Longbow64 is offline  
0
Reply With Quote
      06-01-2011, 05:25 PM   #3
Definitive
definitivecars.com
 
Definitive's Avatar
 
Drives: Elsa - 2015 F80 M3 - YMB/SS
Join Date: Aug 2006
Location: So Cal

Posts: 3,720
iTrader: (3)

Garage List
Send a message via AIM to Definitive Send a message via MSN to Definitive
You can get the clips from home depot. Bt it would help if you posted some more info and maybe pics. What kind of splitter, what material? I can say from experience, that the clips alone will prob not hold the splitter on. Unless it's small and doesn't create much downforce.

D
__________________
Definitive is offline   United_States
0
Reply With Quote
      06-02-2011, 06:21 AM   #4
Inerrant
Private First Class
 
Drives: 2011.75 BMW M3 E93
Join Date: Feb 2011
Location: NOVA

Posts: 129
iTrader: (0)

I just used the 3M double sided tape and thats it! so far (1 month of heavy rain/Heat & fast driving) its holding on!
Inerrant is offline  
0
Reply With Quote
      06-02-2011, 10:07 AM   #5
Definitive
definitivecars.com
 
Definitive's Avatar
 
Drives: Elsa - 2015 F80 M3 - YMB/SS
Join Date: Aug 2006
Location: So Cal

Posts: 3,720
iTrader: (3)

Garage List
Send a message via AIM to Definitive Send a message via MSN to Definitive
You must be talking about the. BMW perf splitters? No way a full splitter would stay on with. Just tape...

D
__________________
Definitive is offline   United_States
0
Reply With Quote
      06-02-2011, 10:49 AM   #6
Sean05
Putcha ang ganda...
 
Sean05's Avatar
 
Drives: 08 MR E92 M3
Join Date: Feb 2010
Location: Los Angeles, Brea CA.

Posts: 5,330
iTrader: (9)

Send a message via Yahoo to Sean05
with my Akrym.. all the holes lined up. no drilling is needed just put a lot of 3M double sided tape and you should be good to go.

BTW what splitter do you have.

EDIT: people think im just putting tape. WTF... thats not right mentioned above that all the holes on my Akrym lined up. Meaning screws are in it.... plus xtra tape to hold the lip will make it more durable.
__________________

Last edited by Sean05; 06-02-2011 at 03:48 PM.
Sean05 is offline   Philippines
0
Reply With Quote
      06-02-2011, 11:33 AM   #7
elp_jc
Brigadier General
 
Drives: .
Join Date: May 2008
Location: .

Posts: 4,910
iTrader: (0)

If a full splitter is creating any downforce, you don't want that sucker with tape only, especially mounted on a convoluted shape. A spoiler has a vector against the trunk (pushing it down), but a splitter has all forces away from the bumper, trying to rip it off. In fact, the bumper is too flimsy to withstand any significant downforce anyway, as it's not bolted to any solid piece (just the 'hanging' black pieces) at the bottom. Good day.
elp_jc is offline   United_States
0
Reply With Quote
      06-02-2011, 11:56 AM   #8
chris s
Major General
 
chris s's Avatar
 
Drives: 2012 e92 M3
Join Date: Oct 2008
Location: New York

Posts: 5,298
iTrader: (8)

I used the 2 screws provided for each side and one strip of 3M 1/2" Automotive Double sided tape on the top/upper most edge. That's all you need!

A jack or ramps helps to get under there and see what's going on.
__________________

2012 MR e92 M3 DCT, fully loaded... ESS VT2-625, Brembo 380, BBS FI's, Akra/Challenge Sport, KW Sleeve kit, Full OEM CF Interior
2008 e92 M3 Coupe 6MT | AW/BLK Extended...SOLD!
chris s is offline  
0
Reply With Quote
      06-02-2011, 11:57 AM   #9
chris s
Major General
 
chris s's Avatar
 
Drives: 2012 e92 M3
Join Date: Oct 2008
Location: New York

Posts: 5,298
iTrader: (8)

Using just tape is ridiculous... those WILL come off sooner than later.
__________________

2012 MR e92 M3 DCT, fully loaded... ESS VT2-625, Brembo 380, BBS FI's, Akra/Challenge Sport, KW Sleeve kit, Full OEM CF Interior
2008 e92 M3 Coupe 6MT | AW/BLK Extended...SOLD!
chris s is offline  
0
Reply With Quote
      06-02-2011, 12:49 PM   #10
rye m3
Lieutenant
 
rye m3's Avatar
 
Drives: 2011.75 E92 M3
Join Date: Apr 2011
Location: New York

Posts: 489
iTrader: (2)

Quote:
Originally Posted by chris s View Post
I used the 2 screws provided for each side and one strip of 3M 1/2" Automotive Double sided tape on the top/upper most edge. That's all you need!

A jack or ramps helps to get under there and see what's going on.
Thanks for all the tips. I was refering to the only splitters I know - the OEM ones. I attached them with the one stock screw and then 1/2" double sided foam tape on the top edge just as Chris did. I may just drill a hole and use another screw for the other one, without a clip nut.
The OEM splitters are certainly not providing a lot of downforce.

Also, in the OEM box, EACH splitter was provided with 10 screws and no nuts. Of course no diagram of the installation. I really wonder what the intention is for providing 10 screws per side!
__________________
E92 M3 MR on Red/Black ZCP Sound
Carbon

2007 997S - sold
2003 E46 M3 Steel Grey on Red- sold
1997 E36 M3 Arctic Silver on Black- sold
rye m3 is offline   Switzerland
0
Reply With Quote
      06-02-2011, 01:59 PM   #11
chris s
Major General
 
chris s's Avatar
 
Drives: 2012 e92 M3
Join Date: Oct 2008
Location: New York

Posts: 5,298
iTrader: (8)

Quote:
Originally Posted by rye m3 View Post
Thanks for all the tips. I was refering to the only splitters I know - the OEM ones. I attached them with the one stock screw and then 1/2" double sided foam tape on the top edge just as Chris did. I may just drill a hole and use another screw for the other one, without a clip nut.
The OEM splitters are certainly not providing a lot of downforce.

Also, in the OEM box, EACH splitter was provided with 10 screws and no nuts. Of course no diagram of the installation. I really wonder what the intention is for providing 10 screws per side!


I drilled the second hole...no clip nut and it held fine. The hole won't be remotely visible if the splitters are removed.

No idea why they gave so many screws...seemed like complete waste to me!
__________________

2012 MR e92 M3 DCT, fully loaded... ESS VT2-625, Brembo 380, BBS FI's, Akra/Challenge Sport, KW Sleeve kit, Full OEM CF Interior
2008 e92 M3 Coupe 6MT | AW/BLK Extended...SOLD!
chris s is offline  
0
Reply With Quote
      06-02-2011, 02:23 PM   #12
Definitive
definitivecars.com
 
Definitive's Avatar
 
Drives: Elsa - 2015 F80 M3 - YMB/SS
Join Date: Aug 2006
Location: So Cal

Posts: 3,720
iTrader: (3)

Garage List
Send a message via AIM to Definitive Send a message via MSN to Definitive



You can see more pics of my splitter here. I made it.
__________________
Definitive is offline   United_States
0
Reply With Quote
      10-17-2013, 02:48 PM   #13
spr
Lieutenant
 
Drives: e92 M3
Join Date: Nov 2008
Location: San Diego

Posts: 469
iTrader: (0)

How did you make that splitter? I just bought the Akrym front splitter. The holes all line up well and I used 3m tape all along the front but it didn't hold and there is a gap at the front now??? What can I use? The only idea I have is betalink like I used on the rear OEM spoiler I have because of the real downforce created.
spr is offline  
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 04:39 AM.




m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST