Curbed Passenger Front Wheel - Repair Shops?

TheDeliverator · 12-14-2012, 02:11 PM

Anyone know of any places to get the wheel fixed in the area?

: (

BTW it's a ZCP 359M wheel

Ruke · 12-14-2012, 03:15 PM

I'd be interested as well. I have a curb rash on the front-left 359M ZCP wheel that spans about 40 degrees or so. Damned automated ticket tollbooths on the I-76 Ohio turnpike are just too far away from the curb. At least now I have my EZPass transponder so I won't have to stop at those ticket tollbooths the next time I make a WI-DC run.

skins333 · 12-14-2012, 06:36 PM

wheelsonsite.com

they will come to you and fix wheels with tire still mounted on

done in bout an hour

skins333 · 12-14-2012, 06:37 PM

http://www.m3post.com/forums/showthr...t=wheel+repair

TheDeliverator · 12-14-2012, 10:10 PM

Thanks to both of you!

Snig · 12-14-2012, 10:31 PM

Ye Olde Wheel Shop in Laurel. Less convenient than wheelsonsite, but probably less cost-wise as well. I need to contact wheelsonsite, damn Annapolis parking garage.

GOVCO · 12-16-2012, 12:25 PM

Ballpark price for those that used this service... Have a few minor nics; nothing like in the b/a pics on their site. Just curious.

skins333 · 12-16-2012, 06:24 PM

Quote:

Originally Posted by GOVCO

Ballpark price for those that used this service... Have a few minor nics; nothing like in the b/a pics on their site. Just curious.

pm sent

pseto · 12-17-2012, 04:43 PM

rimdoc.com, ask for Jose

GOVCO · 12-17-2012, 07:27 PM

Quote:

Originally Posted by skins333

pm sent

Appreciate the PM.

ixm3 · 12-18-2012, 05:06 AM

wheel collision center in Bath, PA.

bvanderbilt · 12-18-2012, 06:20 AM

I had a reputable wheel repair shop (mobile) come out and work on one of my 220Ms that I lightly curbed. They re-machined the lip. It was $150 for the repair.

Unfortunately I cannot recommend this type of wheel repair; it is always noticeable to me where it was performed and does not match the OEM finish.

If I had to do it over again I would either use a $25 wheel repair kit and accept the mediocre results vs. the price or I would buy an entirely new wheel, you can get 359Ms at a decent discount.

pseto · 12-18-2012, 08:09 AM

Quote:

Originally Posted by bvanderbilt

I had a reputable wheel repair shop (mobile) come out and work on one of my 220Ms that I lightly curbed. They re-machined the lip. It was $150 for the repair.

Unfortunately I cannot recommend this type of wheel repair; it is always noticeable to me where it was performed and does not match the OEM finish.

If I had to do it over again I would either use a $25 wheel repair kit and accept the mediocre results vs. the price or I would buy an entirely new wheel, you can get 359Ms at a decent discount.

Who did you use? Quality of work is what distinguishes wheel repair vendors. I've had curbed rims fixed and couldn't tell at all that they were repaired, including my 359s

TheDeliverator · 12-18-2012, 10:23 AM

Quote:

Originally Posted by pseto

...I've had curbed rims fixed and couldn't tell at all that they were repaired, including my 359s

Whom did you use?

Snig · 12-18-2012, 11:26 AM

Quote:

Originally Posted by TheDeliverator

Whom did you use?

Funny how people post such useless posts. I got my wheels repaired, couldn't tell at all! No, i'm not going to bother telling you where I had them repaired.

pseto · 12-18-2012, 04:24 PM

Quote:

Originally Posted by Snig

Funny how people post such useless posts. I got my wheels repaired, couldn't tell at all! No, i'm not going to bother telling you where I had them repaired.

Quote:

Originally Posted by TheDeliverator

Whom did you use?

It was already posted above, see post #9...I've used rimdoc for many years on multiple sets of wheels (and colors) and have always been very happy with their quality of work.

BTW, for $150/wheel, I'd make them do it all over again until you're satisfied.

Snig · 12-18-2012, 04:28 PM

Quote:

Originally Posted by pseto

See post #9...I've used rimdoc for many years on multiple sets of rims (and colors) and have always been very happy with their quality of work.

But that requires me to scroll up!

TheDeliverator · 12-18-2012, 07:33 PM

I scrolled up twice and looked before posting. I even scrolled down to make sure while I was in the post screen.

I fucked up. Sometimes people make mistakes.

pseto · 12-18-2012, 08:20 PM

Quote:

Originally Posted by TheDeliverator

I scrolled up twice and looked before posting. I even scrolled down to make sure while I was in the post screen.

I fucked up. Sometimes people make mistakes.

No big deal, hopefully I was able to help

checkmate · 12-19-2012, 08:44 AM

Now..the important question is whether they do a good job on forged rims? I have 220Ms.

12-14-2012, 02:11 PM	#1
TheDeliverator Second Lieutenant Drives: A Singularity Join Date: Mar 2012 Location: MD Posts: 201 iTrader: (1)	Anyone know of any places to get the wheel fixed in the area? : ( BTW it's a ZCP 359M wheel __________________
	Tweet

12-14-2012, 10:10 PM	#5
TheDeliverator Second Lieutenant Drives: A Singularity Join Date: Mar 2012 Location: MD Posts: 201 iTrader: (1)	Thanks to both of you! __________________

12-19-2012, 08:44 AM	#20
checkmate Major Drives: AW M3 E90 Join Date: Apr 2010 Location: Bel Air, MD Posts: 1,038 iTrader: (2)	Now..the important question is whether they do a good job on forged rims? I have 220Ms. __________________ I have no idols. I admire work, dedication and competence.-Ayrton Senna

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

12-14-2012, 03:15 PM	#2
Ruke New Member Drives: 2011.5 MR E90 M3 Join Date: Nov 2012 Location: United States Posts: 5 iTrader: (0)	I'd be interested as well. I have a curb rash on the front-left 359M ZCP wheel that spans about 40 degrees or so. Damned automated ticket tollbooths on the I-76 Ohio turnpike are just too far away from the curb. At least now I have my EZPass transponder so I won't have to stop at those ticket tollbooths the next time I make a WI-DC run.

12-14-2012, 06:36 PM	#3
skins333 Captain Drives: '08 E93 BMW M3 MR/'12 x5d SG Join Date: May 2009 Location: Northern VA Posts: 826 iTrader: (2)	wheelsonsite.com they will come to you and fix wheels with tire still mounted on done in bout an hour

12-14-2012, 06:37 PM	#4
skins333 Captain Drives: '08 E93 BMW M3 MR/'12 x5d SG Join Date: May 2009 Location: Northern VA Posts: 826 iTrader: (2)	http://www.m3post.com/forums/showthr...t=wheel+repair

12-16-2012, 12:25 PM	#7
GOVCO Lieutenant Drives: 09 E90 AW M3 DCT [Slight Mods] Join Date: Jun 2011 Location: MD Posts: 409 iTrader: (0)	Ballpark price for those that used this service... Have a few minor nics; nothing like in the b/a pics on their site. Just curious.

12-17-2012, 04:43 PM	#9
pseto Major General Drives: M3 E92 ZCP, M Roadster, X5 4.4 Join Date: Jun 2006 Location: Columbia, MD Posts: 6,105 iTrader: (4)	rimdoc.com, ask for Jose __________________ Paul Seto - BMW Car Club of America National Capital Chapter (MD/DC/NoVA), President & Social Chairman Become a BMW CCA member & reference my member# 339225 Join our NCC Facebook Page

12-18-2012, 05:06 AM	#11
ixm3 Second Lieutenant Drives: M3x2 Join Date: Jul 2010 Location: DE Posts: 276 iTrader: (8)	wheel collision center in Bath, PA.

12-18-2012, 06:20 AM	#12
bvanderbilt Private First Class Drives: 2011 E92 M3 Join Date: Dec 2012 Location: Baltimore, MD Posts: 123 iTrader: (0)	I had a reputable wheel repair shop (mobile) come out and work on one of my 220Ms that I lightly curbed. They re-machined the lip. It was $150 for the repair. Unfortunately I cannot recommend this type of wheel repair; it is always noticeable to me where it was performed and does not match the OEM finish. If I had to do it over again I would either use a $25 wheel repair kit and accept the mediocre results vs. the price or I would buy an entirely new wheel, you can get 359Ms at a decent discount.

12-18-2012, 07:33 PM	#18
TheDeliverator Second Lieutenant Drives: A Singularity Join Date: Mar 2012 Location: MD Posts: 201 iTrader: (1)	I scrolled up twice and looked before posting. I even scrolled down to make sure while I was in the post screen. I fucked up. Sometimes people make mistakes.