▀▄ eas | Factory-Direct Source for Öhlins Suspension Systems (R&T)

tom @ eas · 12-13-2012, 07:42 PM

This is the latest step in the Ohlins Racing automotive philosophy – Road&Track by Ohlins. A more than 30 year long tradition of high-end racing commitments and state-of-the-art solutions within advanced suspension technology is now available for street cars all over the world. The focus has been clear from the very beginning – superior road handling without sacrificing comfort in your day-to-day transports. The time of compromises are over!

Ohlins has added a clever light-weight design with a majority of the parts in aluminum. On top of that, all shocks have suffered through vast corrosion tests according to ISO 9227. The end result is a 2-year limited warranty on all of our products - worldwide.

The Features of DFV Technology
So what is DFV? It is Dual Flow Valve technology – and it sets us apart from our competitors. Only Ohlins has DFV technology on its road and track products.

With DFV, the dual flow valve gives the same characteristics on rebound as it does on compression, thanks to the damper fluid having a consistent path of flow in both directions. This means that the wheel and tyre can quickly and effectively resume their important position back on the ground, providing grip and traction. The new Öhlins R&T range uses DFV technology on every single fitment, making it the perfect upgrade for the enthusiast that needs comfort and agility in the one unit.

Figure 1: (Compression flow) At low shaft speeds, oil flows mostly through the shaft jet bleed (lower dotted arrow). At higher shaft speeds, oil flows mostly through the compression ports in the piston (upper dotted arrow). At very high shaft speeds, or during sudden shaft accelerations, oil can also escape through the compression ports in the DFV, increasing comfort. Figure 2: (Rebound flow) At low shaft speeds, oil flows mostly through the shaft jet bleed (lower dotted arrow). At higher shaft speeds, oil flows mostly through the rebound ports in the piston (upper dotted arrow). At very high shaft speeds, or during sudden shaft accelerations, oil can also escape through the rebound ports in the DFV, maintaining tyre contact with the road.

Because DFV opens more quickly and easily on minor road imperfections, ride comfort is surprisingly supple and more akin to an OEM strut than a coilover set-up. Over undulating surfaces, the compliancy of the R&T units allows the car to crest bumps and pot-holes, whilst still keep stable and in control. Traction is always maintained at its optimum level. When comparing suspension, why settle for second best?

Figure 3: (Vehicle – no DFV) Without DFV the oil can not flow through the piston quickly enough on the rebound stroke after hitting a bump, so the tyre is not able to stay in contact with the road.

Figure 4: (Vehicle – DFV technique) The DFV valve opens, letting the oil flow quicker through the piston on the rebound stroke after hitting a bump, enabling the tyre to stay in contact with the road.

When adjusting ride height on coilover units, it’s worth comparing how it’s done. On many inferior designs, height is adjusted by raising or lowering the lower spring platform. This has the effect of compressing or extending the spring, which can limit the suspension travel that may cause topping out. The Öhlins method is to leave the spring seat in its perfect position, whilst the lower flange spins easily on the threaded body, to allow you to adjust with absolute precision whilst maintaining the perfect characteristics that we took so long to design in! Once you’ve set it all up, the adjuster simply locks off to maintain your exact settings.

Dampers will get hot. That’s one thing that you can be sure of. As the piston moves within the damper, it generates friction – and therefore, heat. Although we can’t stop heat, we can deal with it, and this is yet another way that Öhlins differs from the competition. As the heat increases, the viscosity of the damper fluid can change, altering the car’s handling characteristics. Our unique needle bleed valve expands with temperature, closing the gap that the fluid travels through, maintaining a consistent damping rate. The best thing of all? You won’t even notice! All you’ll feel is that the car responds consistently, lap after lap, turn after turn. Allowing you to concentrate on braking points and apexes whilst the Öhlins technology takes care of the damping.

Figure 5: Thermal Expansion
These kits all work well ‘out of the box’, but there’s still plenty of adjustment for you to set things your way. You like stiff and reactive? Or soft and forgiving? It’s all there. Too much low speed rebound damping can have an adverse effect on grip, so the easily accessible adjuster at the base of the Öhlins units allows small, but positive increments of fine tuning, so you can take into account every single parameter. Sounds complicated? Nothing could be further for the truth. Just a few clicks either way from our factory settings will soon have your car responding precisely to your inputs and driving style.

The Road & Track McPherson struts also feature camber adjustable upper and lower mounts to give you the possibility to fine tune your wheels for the right occasion – whether you want to go for a ride in your neighborhood or take your car for a spin at the track on a weekend.

Features
- DFV (Dual Flow Valve)
- Adjustable ride-height
- Fully rebuildable
- Corrosion salt spray tested (ISO 9227)
- Includes hardware and installation instructions
- 2 year Limited Warranty

Front
- McPherson Strut
- Single bleed adjuster
- Spring preload adjuster (approx. 15 mm lower than standard)
- Coil Springs (343lbs/in)
- Dustcovers
- Uses original top mounts

Rear
- Conventional Shock Absorber
- Single bleed adjuster
- Separate spring preload adjuster (approx. 15 mm lower than standard)
- Coil Springs (400lbs/in)
- Dust covers
- Uses original top mounts

Applications

Ohlins - Road & Track DFV Coilover System
http://www.europeanautosource.com/pr...oilover-system

2000-2006 BMW E46 M3
Spring Rate: Front: 70 N/mm (400 lbs/in.) Rear: 110 N/mm (630 lbs/in.)

2006-2011 BMW E9X 3-Series
Spring Rate: Front: 60 N/mm (343 lbs/in.) Rear: 70 N/mm (400 lbs/in.)

2008-2013 BMW E9X M3
Front: 60 N/mm (343 lbs/in.) Rear: 120 N/mm (686 lbs/in.)

We are a factory-direct Ohlins dealer and have extensive experience in E46M3 and E9XM3 applications on both race and street applications.

For those interested in the Ohlins systems, please feel free to contact us directly.

BIU · 12-13-2012, 07:47 PM

So the official pricing is finally out!!

Christmas decisions !!!! Sachs.... Ohlins....

biggynuts01 · 12-14-2012, 04:39 PM

Tom, I will be coming by next spring to get a set of these installed!

robert @ eas · 12-19-2012, 06:03 PM

Pre-Orders are being taken for the next shipment

img · 12-19-2012, 08:48 PM

I WANT !

kevin @ eas · 01-02-2013, 07:51 PM

Get your Ohlins coil overs today!!

sterile stork · 01-04-2013, 01:40 PM

How much of a nuisance is it switching to a coilover system on an EDC car?

kevin @ eas · 01-04-2013, 02:29 PM

Quote:

Originally Posted by sterile stork

How much of a nuisance is it switching to a coilover system on an EDC car?

Not bad at all, you can have the EDC coded out or also the Macht Schnell EDC emulator works great as well

robert @ eas · 01-08-2013, 02:54 PM

Get your Ohlins from eas!

kevin @ eas · 01-15-2013, 07:38 PM

Get your Ohlins coil overs today!!

robert @ eas · 01-22-2013, 06:51 PM

Order your Ohlins Suspension from eas today!

dekay · 01-25-2013, 03:53 AM

price please. ship to malaysia. thanks.

kevin @ eas · 01-25-2013, 12:09 PM

Quote:

Originally Posted by dekay

price please. ship to malaysia. thanks.

PM coming your way!!

Zzhou · 01-28-2013, 03:09 PM

can you PM me the price for this suspension kit paired with Vorshlag Camber Plates. Ship to 47906 thanks.

kevin @ eas · 01-28-2013, 08:16 PM

Quote:

Originally Posted by zhouzitao

can you PM me the price for this suspension kit paired with Vorshlag Camber Plates. Ship to 47906 thanks.

PM coming your way!!

kevin @ eas · 01-29-2013, 07:33 PM

Upgrade your suspension today with Ohlins coil overs!!

robert @ eas · 02-06-2013, 03:25 PM

Order your Ohlins Suspension from eas!

kevin @ eas · 02-12-2013, 08:09 PM

Get your Ohlins coil overs today!!

w00tw00t · 02-12-2013, 08:20 PM

how does this compare to KW Clubsport ?

robert @ eas · 02-19-2013, 03:51 PM

Another Ohlins R&T ordered from eas!

Get yours ordered today!

robert @ eas · 03-06-2013, 07:05 PM

Order your set from eas today!

robert @ eas · 03-13-2013, 05:57 PM

Another Order was placed for Ohlins Road & Track Suspension

Quote:

Originally Posted by kchu221

can i get pricing picked up please?

PM on the way!

12-13-2012, 07:42 PM	#1
tom @ eas BimmerPost Supporting Vendor Drives: BMW Join Date: Nov 2005 Location: Anaheim, CA Posts: 8,881 iTrader: (12) Garage List 2008 ESS VT2-525 Z4MC [0.00] 2011 ESS VT2-625 M3 [0.00]	▀▄ eas \| Factory-Direct Source for Öhlins Suspension Systems (R&T) This is the latest step in the Ohlins Racing automotive philosophy – Road&Track by Ohlins. A more than 30 year long tradition of high-end racing commitments and state-of-the-art solutions within advanced suspension technology is now available for street cars all over the world. The focus has been clear from the very beginning – superior road handling without sacrificing comfort in your day-to-day transports. The time of compromises are over! Ohlins has added a clever light-weight design with a majority of the parts in aluminum. On top of that, all shocks have suffered through vast corrosion tests according to ISO 9227. The end result is a 2-year limited warranty on all of our products - worldwide. The Features of DFV Technology So what is DFV? It is Dual Flow Valve technology – and it sets us apart from our competitors. Only Ohlins has DFV technology on its road and track products. With DFV, the dual flow valve gives the same characteristics on rebound as it does on compression, thanks to the damper fluid having a consistent path of flow in both directions. This means that the wheel and tyre can quickly and effectively resume their important position back on the ground, providing grip and traction. The new Öhlins R&T range uses DFV technology on every single fitment, making it the perfect upgrade for the enthusiast that needs comfort and agility in the one unit. Figure 1: (Compression flow) At low shaft speeds, oil flows mostly through the shaft jet bleed (lower dotted arrow). At higher shaft speeds, oil flows mostly through the compression ports in the piston (upper dotted arrow). At very high shaft speeds, or during sudden shaft accelerations, oil can also escape through the compression ports in the DFV, increasing comfort. Figure 2: (Rebound flow) At low shaft speeds, oil flows mostly through the shaft jet bleed (lower dotted arrow). At higher shaft speeds, oil flows mostly through the rebound ports in the piston (upper dotted arrow). At very high shaft speeds, or during sudden shaft accelerations, oil can also escape through the rebound ports in the DFV, maintaining tyre contact with the road. Because DFV opens more quickly and easily on minor road imperfections, ride comfort is surprisingly supple and more akin to an OEM strut than a coilover set-up. Over undulating surfaces, the compliancy of the R&T units allows the car to crest bumps and pot-holes, whilst still keep stable and in control. Traction is always maintained at its optimum level. When comparing suspension, why settle for second best? Figure 3: (Vehicle – no DFV) Without DFV the oil can not flow through the piston quickly enough on the rebound stroke after hitting a bump, so the tyre is not able to stay in contact with the road. Figure 4: (Vehicle – DFV technique) The DFV valve opens, letting the oil flow quicker through the piston on the rebound stroke after hitting a bump, enabling the tyre to stay in contact with the road. When adjusting ride height on coilover units, it’s worth comparing how it’s done. On many inferior designs, height is adjusted by raising or lowering the lower spring platform. This has the effect of compressing or extending the spring, which can limit the suspension travel that may cause topping out. The Öhlins method is to leave the spring seat in its perfect position, whilst the lower flange spins easily on the threaded body, to allow you to adjust with absolute precision whilst maintaining the perfect characteristics that we took so long to design in! Once you’ve set it all up, the adjuster simply locks off to maintain your exact settings. Dampers will get hot. That’s one thing that you can be sure of. As the piston moves within the damper, it generates friction – and therefore, heat. Although we can’t stop heat, we can deal with it, and this is yet another way that Öhlins differs from the competition. As the heat increases, the viscosity of the damper fluid can change, altering the car’s handling characteristics. Our unique needle bleed valve expands with temperature, closing the gap that the fluid travels through, maintaining a consistent damping rate. The best thing of all? You won’t even notice! All you’ll feel is that the car responds consistently, lap after lap, turn after turn. Allowing you to concentrate on braking points and apexes whilst the Öhlins technology takes care of the damping. Figure 5: Thermal Expansion These kits all work well ‘out of the box’, but there’s still plenty of adjustment for you to set things your way. You like stiff and reactive? Or soft and forgiving? It’s all there. Too much low speed rebound damping can have an adverse effect on grip, so the easily accessible adjuster at the base of the Öhlins units allows small, but positive increments of fine tuning, so you can take into account every single parameter. Sounds complicated? Nothing could be further for the truth. Just a few clicks either way from our factory settings will soon have your car responding precisely to your inputs and driving style. The Road & Track McPherson struts also feature camber adjustable upper and lower mounts to give you the possibility to fine tune your wheels for the right occasion – whether you want to go for a ride in your neighborhood or take your car for a spin at the track on a weekend. Features - DFV (Dual Flow Valve) - Adjustable ride-height - Fully rebuildable - Corrosion salt spray tested (ISO 9227) - Includes hardware and installation instructions - 2 year Limited Warranty Front - McPherson Strut - Single bleed adjuster - Spring preload adjuster (approx. 15 mm lower than standard) - Coil Springs (343lbs/in) - Dustcovers - Uses original top mounts Rear - Conventional Shock Absorber - Single bleed adjuster - Separate spring preload adjuster (approx. 15 mm lower than standard) - Coil Springs (400lbs/in) - Dust covers - Uses original top mounts Applications Ohlins - Road & Track DFV Coilover System http://www.europeanautosource.com/pr...oilover-system 2000-2006 BMW E46 M3 Spring Rate: Front: 70 N/mm (400 lbs/in.) Rear: 110 N/mm (630 lbs/in.) 2006-2011 BMW E9X 3-Series Spring Rate: Front: 60 N/mm (343 lbs/in.) Rear: 70 N/mm (400 lbs/in.) 2008-2013 BMW E9X M3 Front: 60 N/mm (343 lbs/in.) Rear: 120 N/mm (686 lbs/in.) We are a factory-direct Ohlins dealer and have extensive experience in E46M3 and E9XM3 applications on both race and street applications. For those interested in the Ohlins systems, please feel free to contact us directly. __________________ Tom G. \| european auto source (eas) email: tom@europeanautosource.com web: www.europeanautosource.com tel 866.669.0705 \| ca: 714.369.8524 x22 \| fax: 714.908.1796 Blog \| Facebook \| YouTube \| Flickr \| Twitter Last edited by tom @ eas; 12-19-2012 at 03:56 PM.
	Tweet

12-14-2012, 04:39 PM	#3
biggynuts01 Captain Drives: E92 M3 SG coupe Join Date: Feb 2012 Location: Orange County, CA Posts: 698 iTrader: (0) Garage List 2008 Porsche Cayman S [0.00] 2008 BMW E92 M3 [4.75]	Tom, I will be coming by next spring to get a set of these installed! __________________ 2008 E92 M3 SG DCT - AA Filter, JL Audio 600/6, CDT Audio, Verstraβe Paddles, ECS SS, BMW Performance Spoiler, MH race studs, BMW GTS wheels, Stoptech ST, MR Exhaust, BPM Tune, LTBMW 1M Bumper, MotoGP Lip, Euro MDM & DCT, LCI's , KW CS, TMS Soild Diff Mounts.

12-19-2012, 06:03 PM	#4
robert @ eas BimmerPost Supporting Vendor Drives: BMW Join Date: Nov 2011 Location: 4015 E Leaverton Court, Anahiem, CA 92807 Posts: 1,989 iTrader: (0)	Pre-Orders are being taken for the next shipment __________________ Robert T. \| european auto source (eas) email: robert@europeanautosource.com web: www.europeanautosource.com tel 866.669.0705 \| ca: 714.369.8524 x32 \| fax: 714.908.1796 Blog \| Facebook \| YouTube \| Flickr \| Twitter

12-19-2012, 08:48 PM	#5
img VT3 Drives: E36 M3 Track car,Ess E90 M3 DD Join Date: Feb 2008 Location: The Couch Posts: 5,980 iTrader: (5)	I WANT ! __________________ NO FEAR.NO LIMITS.NO EQUAL Ess VT3 LC built motor,Volk TE37SL,Challenge modefied Xpipe,Akra axle back CF tips. LOW BOOST 60-130 6.7 sec

01-02-2013, 07:51 PM	#6
kevin @ eas BimmerPost Supporting Vendor Drives: BMW Join Date: Nov 2011 Location: Anaheim Posts: 1,691 iTrader: (5)	Get your Ohlins coil overs today!! __________________ Kevin \| european auto source (eas) email: kevin@europeanautosource.com web: www.europeanautosource.com tel 866.669.0705 \| ca: 714.369.8524 x31 \| fax: 714.908.1796 Blog \| Facebook \| YouTube \| Flickr \| Twitter

12-13-2012, 07:47 PM	#2
BIU First Lieutenant Drives: 2008 A22 E90 M3 DCT Join Date: Apr 2009 Location: Hong Kong Posts: 355 iTrader: (0)	So the official pricing is finally out!! Christmas decisions !!!! Sachs.... Ohlins....

01-04-2013, 01:40 PM	#7
sterile stork coupe la goon Drives: 2008 M3 Coupe Join Date: Jan 2006 Location: PDX Posts: 264 iTrader: (1)	How much of a nuisance is it switching to a coilover system on an EDC car?

01-08-2013, 02:54 PM	#9
robert @ eas BimmerPost Supporting Vendor Drives: BMW Join Date: Nov 2011 Location: 4015 E Leaverton Court, Anahiem, CA 92807 Posts: 1,989 iTrader: (0)	Get your Ohlins from eas! __________________ Robert T. \| european auto source (eas) email: robert@europeanautosource.com web: www.europeanautosource.com tel 866.669.0705 \| ca: 714.369.8524 x32 \| fax: 714.908.1796 Blog \| Facebook \| YouTube \| Flickr \| Twitter

01-15-2013, 07:38 PM	#10
kevin @ eas BimmerPost Supporting Vendor Drives: BMW Join Date: Nov 2011 Location: Anaheim Posts: 1,691 iTrader: (5)	Get your Ohlins coil overs today!! __________________ Kevin \| european auto source (eas) email: kevin@europeanautosource.com web: www.europeanautosource.com tel 866.669.0705 \| ca: 714.369.8524 x31 \| fax: 714.908.1796 Blog \| Facebook \| YouTube \| Flickr \| Twitter

01-22-2013, 06:51 PM	#11
robert @ eas BimmerPost Supporting Vendor Drives: BMW Join Date: Nov 2011 Location: 4015 E Leaverton Court, Anahiem, CA 92807 Posts: 1,989 iTrader: (0)	Order your Ohlins Suspension from eas today! __________________ Robert T. \| european auto source (eas) email: robert@europeanautosource.com web: www.europeanautosource.com tel 866.669.0705 \| ca: 714.369.8524 x32 \| fax: 714.908.1796 Blog \| Facebook \| YouTube \| Flickr \| Twitter

01-25-2013, 03:53 AM	#12
dekay New Member Drives: alpine white, BBS LM-R Join Date: Sep 2010 Location: malaysia Posts: 26 iTrader: (0)	price please. ship to malaysia. thanks.

01-28-2013, 03:09 PM	#14
Zzhou Lieutenant Drives: 2012 E92 SSII ZCP DCT Join Date: Aug 2011 Location: West Lafayette,IN/Shanghai,China Posts: 520 iTrader: (0)	can you PM me the price for this suspension kit paired with Vorshlag Camber Plates. Ship to 47906 thanks. __________________ AA Green Filter/AA Pulley/AA catless X-pipes/AA signature exhaust/AA TUNE/TMS studs/Project Kics R40/AD08/Vorsteiner GTS5 Bumper/LUX H8

01-29-2013, 07:33 PM	#16
kevin @ eas BimmerPost Supporting Vendor Drives: BMW Join Date: Nov 2011 Location: Anaheim Posts: 1,691 iTrader: (5)	Upgrade your suspension today with Ohlins coil overs!! __________________ Kevin \| european auto source (eas) email: kevin@europeanautosource.com web: www.europeanautosource.com tel 866.669.0705 \| ca: 714.369.8524 x31 \| fax: 714.908.1796 Blog \| Facebook \| YouTube \| Flickr \| Twitter

02-06-2013, 03:25 PM	#17
robert @ eas BimmerPost Supporting Vendor Drives: BMW Join Date: Nov 2011 Location: 4015 E Leaverton Court, Anahiem, CA 92807 Posts: 1,989 iTrader: (0)	Order your Ohlins Suspension from eas! __________________ Robert T. \| european auto source (eas) email: robert@europeanautosource.com web: www.europeanautosource.com tel 866.669.0705 \| ca: 714.369.8524 x32 \| fax: 714.908.1796 Blog \| Facebook \| YouTube \| Flickr \| Twitter

02-12-2013, 08:09 PM	#18
kevin @ eas BimmerPost Supporting Vendor Drives: BMW Join Date: Nov 2011 Location: Anaheim Posts: 1,691 iTrader: (5)	Get your Ohlins coil overs today!! __________________ Kevin \| european auto source (eas) email: kevin@europeanautosource.com web: www.europeanautosource.com tel 866.669.0705 \| ca: 714.369.8524 x31 \| fax: 714.908.1796 Blog \| Facebook \| YouTube \| Flickr \| Twitter

02-12-2013, 08:20 PM	#19
w00tw00t Major Drives: 2013 E92 M3 AW Join Date: Oct 2010 Location: Seattle Posts: 1,325 iTrader: (9)	how does this compare to KW Clubsport ? __________________ M3 E92 AW \| Semi-Stripped Interior \| APEX EC-7 18x10 ET25 \| APEX Wheel Studs \| Akrapovic Evo \| Brembo GT 380 BBK \| Pagid RS29 \| BMC Air Filter \| AiM Solo DL \| OMP WRC Seats w/ Planted Brackets \| Challenge Harness Bar \| Schroth Profi II-6 Hans \| KW Clubsport \| Euro MDM & BPM Tune \| NT01 \| BFG R1 \| NT05 2013 Trackdays # \| 8 \| Ridge 1:58 \| Pacific 1:36

02-19-2013, 03:51 PM	#20
robert @ eas BimmerPost Supporting Vendor Drives: BMW Join Date: Nov 2011 Location: 4015 E Leaverton Court, Anahiem, CA 92807 Posts: 1,989 iTrader: (0)	Another Ohlins R&T ordered from eas! Get yours ordered today! __________________ Robert T. \| european auto source (eas) email: robert@europeanautosource.com web: www.europeanautosource.com tel 866.669.0705 \| ca: 714.369.8524 x32 \| fax: 714.908.1796 Blog \| Facebook \| YouTube \| Flickr \| Twitter

03-06-2013, 07:05 PM	#21
robert @ eas BimmerPost Supporting Vendor Drives: BMW Join Date: Nov 2011 Location: 4015 E Leaverton Court, Anahiem, CA 92807 Posts: 1,989 iTrader: (0)	Order your set from eas today! __________________ Robert T. \| european auto source (eas) email: robert@europeanautosource.com web: www.europeanautosource.com tel 866.669.0705 \| ca: 714.369.8524 x32 \| fax: 714.908.1796 Blog \| Facebook \| YouTube \| Flickr \| Twitter

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search