|08-08-2014, 10:32 PM||#1|
Drives: Next Generation LED Lighting
Join Date: May 2008
E92-Lighting | DTEC BMW E9X M3 LCI Backup Reverse Light built in canbus ERROR FREE
Our newly released DTEC LCI backup reverse CREE lights features one pair of amazing bright white and error free HID matching 30W CREE high power PH16 LED bulbs for the BMW 2011 and up E92/E93 3 Series coupe/convertible (including all M3's) for the backup and/or reverse lights.
These ultra bright high powered revese LED bulbs consists of 2 pieces of CREE LED Lights
It comes with error free driver module packs to work and function flawlessly and most importantly, completely error free for all the 2011 and up BMW E92/E93 LCIs, must have LCI Taillights from BMW OE or FRM3 installed and coded correctly.
FRM3 started from the E92 coupe and E93 convertible chassis in 2011 (including all M3's from 2011 and after), any chasis before is FRM2 which will need BMW coding/flashing from FRM2 to FRM3.
Max operating wattage : 30W
6500K Xenon Super White
Completely error free and non-polar design
5x brighter than stock LCI reverse lights
Lighting output is approximately 700 lumens
Installation is very simple and should take less than 15 minutes for both sides, you can access the OEM LCI reverse bulbs via the trunk without tail light removal
NO TAIL LIGHT REMOVAL NECCESARY WITH OUR DTECS!
Tools for installation is just Torx T-20 driver to remove the screws by removing the rear panels by pulling on the outer edges. (counter clock wise to remove)
RED WIRE TO OEM connector GREY WIRE (perfect fitting)
BLACK WIRE TO OEM connector WHITE WIRE (perfect fitting)
Please make sure your BMW E92 / E93 3 series has the LCI LED tail lamp (including all M3's from 2011 and after), anything before 2011 will require FRM3 flashing/coding and OEM LCI tail lamps.
*E92 E93 3-Series Coupes/Convertible | (2011 - 2013)
*E90 E92 E93 M3's with LCI Tail Lights (2011 - 2013)
1 YEAR LIMITED WARRANTY
Last edited by E92-Lighting; 12-25-2014 at 04:40 PM.
|Thread Tools||Search this Thread|