19x10.5 et22 all four corners?

TRY...M3 · 07-19-2012, 08:21 PM

Is it possible to run that set up, just H&R springs or do I need to adjust the camber?

THE TECH · 07-19-2012, 08:23 PM

I know that 10 +25 front and 11 +25 rear fits on H&R.

TRY...M3 · 07-19-2012, 08:29 PM

Quote:

Originally Posted by THE TECH

I know that 10 +25 front and 11 +25 rear fits on H&R.

Me too, thats what my VMR's are.

THE TECH · 07-19-2012, 08:31 PM

I think camber adjustment may come down to tire size.

TRY...M3 · 07-19-2012, 08:48 PM

Quote:

Originally Posted by THE TECH

I think camber adjustment may come down to tire size.

I was thinking 265/30/19 or 275/30/19 whatever works

THE TECH · 07-19-2012, 08:55 PM

Quote:

Originally Posted by TRY...M3

I was thinking 265/30/19 or 275/30/19 whatever works

Not very wide so I would see no issue.

TRY...M3 · 07-19-2012, 09:04 PM

Quote:

Originally Posted by THE TECH

Quote:

Originally Posted by TRY...M3

I was thinking 265/30/19 or 275/30/19 whatever works

Not very wide so I would see no issue.

Thanks bro well see

Malek@MRF · 07-19-2012, 09:05 PM

If you have any form of coil-over suspension, this will not fit. The wheel/tire will hit the shock and spring.

TRY...M3 · 07-19-2012, 09:19 PM

Quote:

Originally Posted by Malek@MRF

If you have any form of coil-over suspension, this will not fit. The wheel/tire will hit the shock and spring.

Im just on H&R springs....This is why I didnt order the GC kit from you yet

chuxdelux · 07-20-2012, 04:05 AM

I don't see why it shouldn't fit. Check this thread out.
http://www.m3post.com/forums/showthread.php?t=720343
I know these are 18's but you get the picture.

Sean05 · 07-20-2012, 08:24 AM

It will work as long as you dont put wide tires in the front...

I suggest to get a staggered set up due to extra weight that you dont need. Plus if you are using 265 front it will look stretch on a 10.5 wheel...

I like running tires that over lap a bit on the wheels to avoid wheel rub.... with the set up your looking for it will rub on turns... since all M3 are built differently some will only rub at full lock.

TRY...M3 · 07-20-2012, 11:08 AM

Quote:

Originally Posted by chuxdelux

I don't see why it shouldn't fit. Check this thread out.
[intlink]720343;Feeler: Volk TE37 18x10.5 ET22 All Around w/Hankook R-S3[/intlink]
I know these are 18's but you get the picture.

I spoke to him and he adjusted the camber..

TRY...M3 · 07-20-2012, 11:09 AM

Quote:

Originally Posted by Sean05

It will work as long as you dont put wide tires in the front...

I suggest to get a staggered set up due to extra weight that you dont need. Plus if you are using 265 front it will look stretch on a 10.5 wheel...

I like running tires that over lap a bit on the wheels to avoid wheel rub.... with the set up your looking for it will rub on turns... since all M3 are built differently some will only rub at full lock.

Thanks, I was thinking 265 just so it didn't rub. I was afraid a 275 would be too much.

Sean05 · 07-20-2012, 12:45 PM

Quote:

Originally Posted by TRY...M3

Thanks, I was thinking 265 just so it didn't rub. I was afraid a 275 would be too much.

I was running 275 30 19 before and even on 30 i was rubbing on full lock badly... ... if your going to run 275 35 19 that will kill it specially with a 10.5 wheels.

yea i would run 265.. but with 10.5 on a 265 is a bit small though...

TRY...M3 · 07-20-2012, 05:42 PM

Quote:

Originally Posted by Sean05

Quote:

Originally Posted by TRY...M3

Thanks, I was thinking 265 just so it didn't rub. I was afraid a 275 would be too much.

I was running 275 30 19 before and even on 30 i was rubbing on full lock badly... ... if your going to run 275 35 19 that will kill it specially with a 10.5 wheels.

yea i would run 265.. but with 10.5 on a 265 is a bit small though...

I know a 265 might be too much of a stretch.

07-19-2012, 08:21 PM	#1
TRY...M3 Major Drives: Depends on the day Join Date: Nov 2010 Location: PA Posts: 1,408 iTrader: (2)	19x10.5 et22 all four corners? Is it possible to run that set up, just H&R springs or do I need to adjust the camber?
	Tweet

07-19-2012, 08:23 PM	#2
THE TECH BimmerPost Supporting Vendor Drives: BPMsport 2012 E92 M3 Join Date: Jun 2011 Location: Kansas Posts: 11,906 iTrader: (39)	I know that 10 +25 front and 11 +25 rear fits on H&R. __________________ Check us out on Facebook at BPMsportLabs

07-19-2012, 08:31 PM	#4
THE TECH BimmerPost Supporting Vendor Drives: BPMsport 2012 E92 M3 Join Date: Jun 2011 Location: Kansas Posts: 11,906 iTrader: (39)	I think camber adjustment may come down to tire size. __________________ Check us out on Facebook at BPMsportLabs

07-19-2012, 09:05 PM	#8
Malek@MRF BimmerPost Supporting Vendor Drives: E92 ZCP Melbourne 6MT Join Date: Jan 2008 Location: Irvine, California Posts: 2,822 iTrader: (5)	If you have any form of coil-over suspension, this will not fit. The wheel/tire will hit the shock and spring. __________________ MRF on Facebook Southern California's largest & most reputable E9x M3 forced induction & suspension facility. *"Performance; Uncompromised."*

07-20-2012, 08:24 AM	#11
Sean05 Putcha ang ganda... Drives: 08 MR E92 M3 Join Date: Feb 2010 Location: Los Angeles, Brea CA. Posts: 4,973 iTrader: (9)	It will work as long as you dont put wide tires in the front... I suggest to get a staggered set up due to extra weight that you dont need. Plus if you are using 265 front it will look stretch on a 10.5 wheel... I like running tires that over lap a bit on the wheels to avoid wheel rub.... with the set up your looking for it will rub on turns... since all M3 are built differently some will only rub at full lock. __________________

07-20-2012, 04:05 AM	#10
chuxdelux Lieutenant Drives: 09 E90 M3, 2011 MCS Join Date: Jul 2011 Location: Honolulu,HI Posts: 470 iTrader: (1)	I don't see why it shouldn't fit. Check this thread out. http://www.m3post.com/forums/showthread.php?t=720343 I know these are 18's but you get the picture.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search