BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read

Go Back   M3Post - BMW M3 Forum > M3 Marketplace > SPONSORS Classifieds/Groupbuys/Specials Area > Suspension | Brakes | Chassis | Handling
Strasse Forged
Post Reply
Thread Tools Search this Thread
      08-27-2015, 10:48 AM   #1
BimmerPost Supporting Vendor
Cat@IND's Avatar

Drives: E36 M3, E30 325
Join Date: Mar 2013
Location: Chicago

iTrader: (1)

IND | Fall Line Motorsports E9X M3 Toe Link Kits

A byproduct of multi-link suspension arrangements is a dynamic change in the car’s alignment settings- when making an adjustment to one attribute like camber, track width and toe will follow. This is especially true for the E9x cars, as the original BMW camber eccentric bolt has an impact on toe as well. Alignments are made faster and simpler when using a set of aftermarket lower arms, enabling the alignment tech to easily reset toe after adjusting camber.

Partnered with Fall Line Motorsports, we are happy to offer a solution in two versions - Race and Standard.

Fall Line Motorsports E9X M3 Toe Link Kit – Race

The race toe link kit by Fall Line Motorsports is designed to facilitate rapid adjustments of toe during an alignment, and combined with the tension strut will also enable adjustment of overall track. Not only does this allow for fine tuning of wheel fitment, these arms will allow an alignment shop to make quick work of car setup, even simplifying the camber adjustment process as a result.

The race toe links utilize a unique clamp-style fastener system as seen in BMW’s own tie rods and Porsche Motorsport components, tightening the adjustment arm in place with no stretch of the hardware or change of alignment. Less expensive jam-nut designs limit precision and nearly guarantee an alignment change when the jam-nut is tightened. As will all Fall Line suspension components, high quality Aurora bearings are used to ensure a very long service life. ARP hardware is used throughout to guarantee the highest level of durability. Laser cut lockout washers correctly eliminate the original BMW adjustment, eliminating any unwanted movement in the system.

Fall Line Motorsports E9X M3 Toe Link Kit – Standard

The standard toe link kit by Fall Line Motorsports is designed to simplify toe changes at an alignment facility while still keeping cost reasonable.
The standard toe link kit keeps costs down by using a traditional jam nut design in a sturdy billet arm. Adjustable threaded rod ends turn into and out of the arm for a wide range of toe adjustment, and enable an alignment technician to easily set toe on a lowered car.

Fall Line Motorsports E9X M3 Toe Link Kit - Race $1029
Fall Line Motorsports E9X M3 Toe Link Kit - Standard $258

Please contact IND by phone or email for more information or to place your order.
866.963.4520 |

The Fall Line Motorsports E9X M3 Toe Link Kits may be viewed here in our online store.


Last edited by Cat@IND; 08-27-2015 at 01:33 PM.
Appreciate 0
      05-27-2016, 03:48 AM   #2
First Lieutenant

Drives: E92 335is DCT
Join Date: Mar 2011
Location: Vancouver

iTrader: (0)

Hey two questions, does the standard kit have Aurora bearings?

Also, could either of these be ordered with dust boots installed on it?

The reason is I daily/street drive my car in the winter as well, and will be seeing snow and salt.
Appreciate 0
Post Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -4. The time now is 03:50 PM.

Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.,,,,,,,,, logo and trademark are properties of BIMMERPOST