BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Engine, Transmission, Exhaust, Drivetrain, ECU Software Modifications
 
Strasse Wheels
Post Reply
 
Thread Tools Search this Thread
      06-20-2012, 09:22 PM   #23
MikeE92M3
Captain
MikeE92M3's Avatar
10
Rep
625
Posts

 
Drives: 08 E92 M3
Join Date: May 2012
Location: Richmond, VA

iTrader: (5)

Quote:
Originally Posted by 1sikbmr View Post
Ok heres a full break down. A pulley is smaller than the OEM pulley. Going to the dealer will get you nowhere as they have no idea what size belts you would need in order fit your new aftermarket pulley. If you can verify that AA has the same size pulley then i can find out the belt sizes like that.

The only difference between the years is the belt and by belt i don't mean size. I mean 08 is single sided ridges and 09 plus is double sided ridge. the easy way to do this is look under the hood if you see ridges then it is double sided. It is my assumption that you are not near the car. So PM someone from AA and they will tell you the belt sizes they use.
That helps tremendously. Thank you. So basically, from what I understand from your explantation, is that the belts are not different in length, but in type--either single side ridges or double sided? That makes it easier..thank you.

Who on the forum can I PM from AA? Can I search for the vendor/member?

Thanks!

Mike
__________________
2008 (07/08) E92 M3 BPM Stage II Tuned by Mike Benvo, 6MT, Turner Test Pipes, Magnaflow Custom Catback Exhaust (Magnaflow X Pipe, secondary cat delete, Aero Resonators and Helmholtz Chambers),Vorsteiner CF Lip, Hamann Style CF rear diffuser, CF Rear Decklid Spoiler, BMW Performance Kidney Grills, CF Side Grills, OEM GTS Wheels, K&N Drop-In Filter, GP Thunder 8k Angel Eyes, Painted Reflectors.
Appreciate 0
      06-20-2012, 11:19 PM   #24
1sikbmr
Brigadier General
1sikbmr's Avatar
46
Rep
3,283
Posts

 
Drives: E90 M3 6MT
Join Date: Mar 2010
Location: New York

iTrader: (14)

Quote:
Originally Posted by MikeE92M3 View Post
That helps tremendously. Thank you. So basically, from what I understand from your explantation, is that the belts are not different in length, but in type--either single side ridges or double sided? That makes it easier..thank you.

Who on the forum can I PM from AA? Can I search for the vendor/member?

Thanks!

Mike
that's what i've been told. You can PM Andrew from AA. Just search for Active Autowerke and their name will pop up.
__________________

E90 ///M3 6MT Atlantis Blue - Fox red #TEAMMODE
ESS VT1-550|Volk TE37|Recaro|STOPTECH|Ohlins R/T|Mode Carbon GT4 Lip|Umnitza V4 |Agency Power/Sosi/ACM Test Pipes|BMW PSW V1|
Appreciate 0
      06-22-2012, 10:25 PM   #25
jimmy ny
Second Lieutenant
jimmy ny's Avatar
4
Rep
248
Posts

 
Drives: 2011 bmw m3
Join Date: Jun 2010
Location: new york

iTrader: (0)

you made a mistake. don't install. in cold weather your p/s will chatter
Appreciate 0
      06-23-2012, 01:51 PM   #26
1sikbmr
Brigadier General
1sikbmr's Avatar
46
Rep
3,283
Posts

 
Drives: E90 M3 6MT
Join Date: Mar 2010
Location: New York

iTrader: (14)

Quote:
Originally Posted by jimmy ny
you made a mistake. don't install. in cold weather your p/s will chatter
????
__________________

E90 ///M3 6MT Atlantis Blue - Fox red #TEAMMODE
ESS VT1-550|Volk TE37|Recaro|STOPTECH|Ohlins R/T|Mode Carbon GT4 Lip|Umnitza V4 |Agency Power/Sosi/ACM Test Pipes|BMW PSW V1|
Appreciate 0
      06-23-2012, 10:34 PM   #27
MikeE92M3
Captain
MikeE92M3's Avatar
10
Rep
625
Posts

 
Drives: 08 E92 M3
Join Date: May 2012
Location: Richmond, VA

iTrader: (5)

Quote:
Originally Posted by jimmy ny View Post
you made a mistake. don't install. in cold weather your p/s will chatter
I live in VA..hardly gets too cold down here.
__________________
2008 (07/08) E92 M3 BPM Stage II Tuned by Mike Benvo, 6MT, Turner Test Pipes, Magnaflow Custom Catback Exhaust (Magnaflow X Pipe, secondary cat delete, Aero Resonators and Helmholtz Chambers),Vorsteiner CF Lip, Hamann Style CF rear diffuser, CF Rear Decklid Spoiler, BMW Performance Kidney Grills, CF Side Grills, OEM GTS Wheels, K&N Drop-In Filter, GP Thunder 8k Angel Eyes, Painted Reflectors.
Appreciate 0
      06-23-2012, 10:36 PM   #28
MikeE92M3
Captain
MikeE92M3's Avatar
10
Rep
625
Posts

 
Drives: 08 E92 M3
Join Date: May 2012
Location: Richmond, VA

iTrader: (5)

Pics of Pulley Belts: Correct for 2008 6mt?

I have attached pics of my pulley and its belts, hope someone can chime in. These are single sided belts (correct?), and these would work for a pre 5/08 e92 m3 with a 6 speed wouldn't it? The reason I ask is because I acquired it from someone who had it on his 2009 DCT...



__________________
2008 (07/08) E92 M3 BPM Stage II Tuned by Mike Benvo, 6MT, Turner Test Pipes, Magnaflow Custom Catback Exhaust (Magnaflow X Pipe, secondary cat delete, Aero Resonators and Helmholtz Chambers),Vorsteiner CF Lip, Hamann Style CF rear diffuser, CF Rear Decklid Spoiler, BMW Performance Kidney Grills, CF Side Grills, OEM GTS Wheels, K&N Drop-In Filter, GP Thunder 8k Angel Eyes, Painted Reflectors.
Appreciate 0
      06-23-2012, 10:46 PM   #29
MikeE92M3
Captain
MikeE92M3's Avatar
10
Rep
625
Posts

 
Drives: 08 E92 M3
Join Date: May 2012
Location: Richmond, VA

iTrader: (5)

shit, NVM, just ran a check on my VIN number through realoem.com, my car was built in 7/08...so it is the later one...then why did I get two single sided belts?.... hmm....

__________________
2008 (07/08) E92 M3 BPM Stage II Tuned by Mike Benvo, 6MT, Turner Test Pipes, Magnaflow Custom Catback Exhaust (Magnaflow X Pipe, secondary cat delete, Aero Resonators and Helmholtz Chambers),Vorsteiner CF Lip, Hamann Style CF rear diffuser, CF Rear Decklid Spoiler, BMW Performance Kidney Grills, CF Side Grills, OEM GTS Wheels, K&N Drop-In Filter, GP Thunder 8k Angel Eyes, Painted Reflectors.
Appreciate 0
      06-24-2012, 04:14 AM   #30
JerezblackM3
Second Lieutenant
5
Rep
256
Posts

 
Drives: e92 m3 dct
Join Date: Apr 2011
Location: lebanon

iTrader: (0)

Quote:
Originally Posted by 1sikbmr
Quote:
Originally Posted by MikeE92M3
But would all pulleys be the same, minus the fact that the belts would be different? Basically, the only difference between the prior 5/08 builds and after that are the belts, correct?

Pics of pulley I acquired:


Yes the pulleys are the same for each brand. Ex: AA pulley is the same for the entire model production only the belts have been changed. I suggest calling tms to find out the belt sizes they use. Also it wasnt so much as a difference in belt size but a difference in belt itself. Older models have single sided belts while newer models have double sided belts
Don't the active autowerke pulley use one belt?
Appreciate 0
      06-24-2012, 01:26 PM   #31
MikeE92M3
Captain
MikeE92M3's Avatar
10
Rep
625
Posts

 
Drives: 08 E92 M3
Join Date: May 2012
Location: Richmond, VA

iTrader: (5)

Anyone else have any insight as to whether or not these belts will work with the pulley for a car produced after 7/08?
__________________
2008 (07/08) E92 M3 BPM Stage II Tuned by Mike Benvo, 6MT, Turner Test Pipes, Magnaflow Custom Catback Exhaust (Magnaflow X Pipe, secondary cat delete, Aero Resonators and Helmholtz Chambers),Vorsteiner CF Lip, Hamann Style CF rear diffuser, CF Rear Decklid Spoiler, BMW Performance Kidney Grills, CF Side Grills, OEM GTS Wheels, K&N Drop-In Filter, GP Thunder 8k Angel Eyes, Painted Reflectors.
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 07:44 PM.




m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST