Cheap OEM Exhaust Mod in East Bay

GREGS335 · 08-02-2012, 02:52 PM

If anyone is looking to get their exhaust modded in the East Bay check out Minute Muffler in Dublin. Only cost me $150 bucks and took less than half a day. Scott performed the ACM style exhaust mod and it sounds frickin awesome!

sdshah · 08-02-2012, 03:17 PM

what does that entail?

NomadM3 · 08-02-2012, 03:24 PM

wow, thats cheap....from what ive been reading most shops charge 300-500

ryguy84 · 08-02-2012, 05:25 PM

Jeez thats super cheap I did the four pipe method and am super happy with the results. Glad you like the sound!

GREGS335 · 08-02-2012, 05:54 PM

Quote:

Originally Posted by NomadM3

wow, thats cheap....from what ive been reading most shops charge 300-500

Yeah, I was quoted $250 and a 2day turnaround by one shop. Being able to get it done in one day was key.

k2e15 · 08-03-2012, 12:47 PM

Quote:

Originally Posted by GREGS335

Yeah, I was quoted $250 and a 2day turnaround by one shop. Being able to get it done in one day was key.

Sounds Clips?

zhp2m3 · 08-07-2012, 11:13 AM

Nice, I might have to check this out.

tbone28 · 08-07-2012, 11:23 AM

Minute Muffler has a great reputation

cpvince · 08-07-2012, 01:17 PM

That is SUUUPER cheap. No leaks, yeah?

haha please post a video if you can! Or maybe I could check it out in person?

GREGS335 · 08-07-2012, 03:21 PM

Quote:

Originally Posted by cpvince

That is SUUUPER cheap. No leaks, yeah?

haha please post a video if you can! Or maybe I could check it out in person?

Sure lemme know when you wanna meet up. Off all day tomorrow! No leaks as far as I can tell.

Sco Cuddie · 08-09-2012, 11:36 AM

Althought not in the East Bay, I was able to get mine done at a shop in Manteca for $250 and a one day turn around.

dagolfpro · 08-10-2012, 12:44 AM

Quote:

Originally Posted by zhp2m3

Nice, I might have to check this out.

You still haven't gotten it done? Maybe I'll get my other exhaust done and sell you mine current one. I have a few people who are interested in buying mine if I sell it.

How have you been? Can you make any of the events on 8/18?

zhp2m3 · 08-13-2012, 01:05 PM

Quote:

Originally Posted by dagolfpro

You still haven't gotten it done? Maybe I'll get my other exhaust done and sell you mine current one. I have a few people who are interested in buying mine if I sell it.

How have you been? Can you make any of the events on 8/18?

Nope, not yet. I've even been slacking on getting my tint done..lol. I think I had to cancel two appts over at Rocky Mountain. Just been so busy with training, work and family. Just saw the post on 8/18. I would love to meet up by there at GG. I'm familiar with that area since I just raced in the SF Marathon and the course runs right by there on the way up to the bridge.

I'm leaving for Maui tomorrow, so I'll give you a buzz when I get back for a drive,etc.

tbone28 · 08-13-2012, 01:18 PM

Quote:

Originally Posted by zhp2m3

Nope, not yet. I've even been slacking on getting my tint done..lol. I think I had to cancel two appts over at Rocky Mountain. Just been so busy with training, work and family. Just saw the post on 8/18. I would love to meet up by there at GG. I'm familiar with that area since I just raced in the SF Marathon and the course runs right by there on the way up to the bridge.

I'm leaving for Maui tomorrow, so I'll give you a buzz when I get back for a drive,etc.

FYI regarding your tint (apologize in advance for the off-topic). I've used Rocky Mountain in the past. He does great work. However, when I asked him how he addresses the dot matrix on an M3, he said he uses vinyl. Not sure if you're aware of that or if you even care. I chose not to go that route as I want a cleaner (vinyl-free) look. I will probably go with Premier for my tint.

zhp2m3 · 08-13-2012, 06:33 PM

Quote:

Originally Posted by tbone28

FYI regarding your tint (apologize in advance for the off-topic). I've used Rocky Mountain in the past. He does great work. However, when I asked him how he addresses the dot matrix on an M3, he said he uses vinyl. Not sure if you're aware of that or if you even care. I chose not to go that route as I want a cleaner (vinyl-free) look. I will probably go with Premier for my tint.

Interesting..thanks for the heads up. I would like to see the difference and how much cleaner going with the vinyl-free look is.

I did talk to Rocky Mountain about the infamous E90's issue with the scratched tint(when rolling windows up/down) and he said he cuts off the plastic tabs to prevent this from occurring.

dagolfpro · 08-13-2012, 10:19 PM

Quote:

Originally Posted by zhp2m3

Nope, not yet. I've even been slacking on getting my tint done..lol. I think I had to cancel two appts over at Rocky Mountain. Just been so busy with training, work and family. Just saw the post on 8/18. I would love to meet up by there at GG. I'm familiar with that area since I just raced in the SF Marathon and the course runs right by there on the way up to the bridge.

I'm leaving for Maui tomorrow, so I'll give you a buzz when I get back for a drive,etc.

The 8/18 I'm going on is not the GG drive but this. Check out the pics on the bottom from there May meet.

Bay Area / Sacramento Meet and Drive Aug 18th

http://www.m3post.com/forums/showthread.php?t=728335

My favorite island. We went to our honeymoon there. Have a great time in Maui. Buzz me when you get back.

Quote:

Originally Posted by tbone28

FYI regarding your tint (apologize in advance for the off-topic). I've used Rocky Mountain in the past. He does great work. However, when I asked him how he addresses the dot matrix on an M3, he said he uses vinyl. Not sure if you're aware of that or if you even care. I chose not to go that route as I want a cleaner (vinyl-free) look. I will probably go with Premier for my tint.

RM did my E90 in October, he didn't use any vinyle. Premier is great, be prepared to pay double to triple the price.

Quote:

Originally Posted by zhp2m3

Interesting..thanks for the heads up. I would like to see the difference and how much cleaner going with the vinyl-free look is.

I did talk to Rocky Mountain about the infamous E90's issue with the scratched tint(when rolling windows up/down) and he said he cuts off the plastic tabs to prevent this from occurring.

No issues with mine.

tbone28 · 08-13-2012, 10:26 PM

Quote:

Originally Posted by dagolfpro

RM did my E90 in October, he didn't use any vinyle. Premier is great, be prepared to pay double to triple the price.

RM in Livermore, correct? If so, that's interesting. His website says he uses vinyl for dot matrix. When I called to ask, he also told me he uses vinyl.

http://rockymtnwindowtint.com/what_is_dot_matrix_

It's great if he can apply the tint w/o need for vinyl. Perhaps I'll give him another call

dagolfpro · 08-14-2012, 12:02 AM

Quote:

Originally Posted by tbone28

RM in Livermore, correct? If so, that's interesting. His website says he uses vinyl for dot matrix. When I called to ask, he also told me he uses vinyl.

http://rockymtnwindowtint.com/what_is_dot_matrix_

It's great if he can apply the tint w/o need for vinyl. Perhaps I'll give him another call

I could be wrong but when I asked him about the dot matrix, he said it wasn't an issue on E90s, Only on E92s. I'll double check mine tomorrow morning.

08-02-2012, 02:52 PM	#1
GREGS335 Private First Class Drives: E92 M3 Join Date: Jun 2009 Location: Dublin, CA Posts: 112 iTrader: (0)	Cheap OEM Exhaust Mod in East Bay If anyone is looking to get their exhaust modded in the East Bay check out Minute Muffler in Dublin. Only cost me $150 bucks and took less than half a day. Scott performed the ACM style exhaust mod and it sounds frickin awesome! __________________ 2008 BMW M3 Coupe - B&G Springs, MS Spacers 15/12, OEM Exhaust Mod (Bypass) Sold: 2009 BMW 335i Coupe - iForged, KWV2, Cobb AP 2001 BMW M3 Coupe - iForged, PSS9, Magnaflow CB
	0 Tweet

08-02-2012, 03:17 PM	#2
sdshah First Lieutenant Drives: 2010 E92 APW BMW M3 Join Date: Jul 2011 Location: Santa Clara, CA Posts: 340 iTrader: (2)	what does that entail? __________________ 2010 Alpine White/Black Novillo E92 M3 FOR SALE!! LINK - http://www.m3post.com/forums/showthread.php?t=806195
	0

08-02-2012, 03:24 PM	#3
NomadM3 Private Drives: 2010 E90 Alpine White Join Date: May 2012 Location: Bay Area, CA Posts: 88 iTrader: (0) Garage List 2010 BMW E90 M3 [0.00] 2008 Toyota Tacoma ... [0.00] 2010 Acura MDX [0.00]	wow, thats cheap....from what ive been reading most shops charge 300-500 __________________ ------------------------------------------ 2010 E90 M3 ALPINE WHITE l FOX RED EXTENDED LEATHER \| 6SP MT \| NAVIGATION \| MOONROOF \| LUX H8 V3 \| ZHP SHIFT KNOB \| AA FILTER \| MEGAN RACING EXHAUST \|
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

08-02-2012, 05:25 PM	#4
ryguy84 Private First Class Drives: looking Join Date: Jun 2010 Location: San Francisco, Ca Posts: 109 iTrader: (0)	Jeez thats super cheap I did the four pipe method and am super happy with the results. Glad you like the sound!
	0

08-07-2012, 11:13 AM	#7
zhp2m3 Private First Class Drives: 2011.75 E90 LeMans Blue Join Date: Oct 2011 Location: SF Bay Area Posts: 124 iTrader: (0)	Nice, I might have to check this out.
	0

08-07-2012, 11:23 AM	#8
tbone28 vvvvvvvvvvvvvv Drives: ^^^^^ Join Date: May 2012 Location: Bay Area, CA Posts: 1,763 iTrader: (13)	Minute Muffler has a great reputation
	0

08-07-2012, 01:17 PM	#9
cpvince Private First Class Drives: 2008 E92 M3 Join Date: Oct 2011 Location: SF Bay Area Posts: 179 iTrader: (1) Garage List 2008 BMW M3 [5.00]	That is SUUUPER cheap. No leaks, yeah? haha please post a video if you can! Or maybe I could check it out in person?
	0

08-09-2012, 11:36 AM	#11
Sco Cuddie Private Drives: 2008 BMW M3 Join Date: Jul 2011 Location: Bay Area, CA Posts: 95 iTrader: (1)	Althought not in the East Bay, I was able to get mine done at a shop in Manteca for $250 and a one day turn around.
	0