BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > DIY Guides/ Discussions
 
ESS Tuning
Post Reply
 
Thread Tools Search this Thread
      06-25-2011, 11:40 AM   #1
frankzlin79
Lieutenant Colonel
 
frankzlin79's Avatar
 
Drives: 2014 335i M Sport
Join Date: Oct 2008
Location: Houston, Texas

Posts: 1,619
iTrader: (5)

DIY: BMW Performance CF Spoiler Installation Using 3M Tape (Very Detailed)

UPDATED LINK TO PICTURES:
http://www.flickr.com/photos/5086579...7631717856956/


Here is my comprehensive DIY for the BMW Performance Carbon Fiber Spoiler using 3M tape on a 2010 E90 M3. The instructions should be the same for an E92 M3.

NOTE: There are TWO different BMW Performance CF spoilers for the E90! The version I got is BMW Part No. 51-71-0-411-575, and is actually designed for a regular 3-series, but fits the M3 just fine. This style of spoiler installs in the OEM location AND on the curvy section of the trunk. When installed, this type of spoiler looks like the Vorsteiner trunk spoiler.

http://www.trademotion.com/partlocat...catalogid=4462

However, the other style of CF spoiler, which was designed for the M3 in mind, installs ONLY on the OEM location (does not mount to curvy portion of trunk) and looks just like a bigger version of the OEM in carbon fiber. The part number for this spoiler is 51622159805:

http://www.trademotion.com/partlocat...catalogid=4462



MORAL: Be sure you order the CF spoiler for the look you are achieving. Either one will fit the E90 (M3 and non-M3).

First, here are some pictures of my spoiler (BMW Part No. 51-71-0-411-575). I was very surprised at how light this thing is. It was liking holding a piece of styro-foam.



Yes, the spoiler is hollow on the inside.



Flawless weave.

Supplies (not all supplies pictured):

3M Super Strength Molding Tape – Part No. 03614 – 1/2” x 180” (AutoZone)
3M Super Strength Molding Tape - Part No. 03616 – 7/8” x 180” (AutoZone)
Scotch 3M Painter’s Tape – 2” width (Home Depot)
Exact-O Knife (Hobby Lobby or any crafts store)
Goo-Gone (Home Depot)
Micro-fiber towel
Quick Detailer Spray



Plastic Packing ribbon ~ 4 ft. (save it the next time you purchase an item that comes in boxes that is wrapped in the plastic ribbon). This ribbon was from the tires I ordered. If you really need one, go visit an Office Depot or Office Max and ask if they have assembled any chairs recently and ask for the plastic ribbon that’s usually wrapped around the box of the chair.

ASIDE: The plastic ribbon is also great for removing the M3 trunk emblem as well as the trunk and hood BMW emblem.



Step 1: Remove OEM spoiler. Using the plastic packing ribbon and your bare hands, wedge the ribbon underneath the OEM spoiler and the trunk. In a sawing (back and forth, back and forth) motion, work your way from one end of the car to the other. Use your own body weight and pull and saw back and forth. I was able to remove the OEM spoiler after about 15 min.

Here is what the plastic ribbon looks like after you are finished removing the OEM spoiler. It takes a beating. Forget dental floss and fishing line, which will be even more stressful on your bare hands. The plastic ribbon is the best way to go as it is strong and has a large surface. The plastic ribbon, with its flat edge, essentially acts like a plastic knife to allow you to cut off the OEM tape.

This is what's left of the plastic ribbon. It takes a major beating.


This is what the OEM spoiler looks like when removed.


Sep 3: Eliminate OEM tape with Fingers. Use your fingers (thumb preferable), rub back and forth and roll up the residual OEM tape on your trunk until it forms mini balls. This gets pretty painful very quickly as your fingers become heated due to all that friction from rubbing. Do a thorough job and remove all large masses. Step 4 below won’t work as a substitute for this step. Your fingers are the best tool for the OEM tape removal.

Step 4: Eliminate OEM tape with Goof Off. Using Goof Off and your micro-fiber towel, apply Goof Off on the towel and clean the trunk to get rid of the remaining glue from the residual OEM tape.

Step 5: Clean trunk area. Using your quick detailer spray, spray your trunk area and wipe clean with micro-fiber towel. Let your trunk completely dry.

I accomplished Steps 1-5 in 30 minutes.

Step 6: Tape Underside of CF Spoiler. Apply 3M tape to underside perimeter of BMW Performance Spoiler. Use the 1/2” tape for the short left and right sides. Use the 7/8” for the top and bottom long sides You’ll notice that the spoiler in some parts has a slight lipped edge to it. When apply the 3M tape, put it as close to the edge as possible without covering up the lipped edge. When it comes time to wrapping the corners, use scissors and estimate slightly more tape than you need and trim the tape. With the Exact-O knife, trim off any excess tape as close to the corner as you can.

I first used the 7/8” tape first along the top and bottom perimeters of the spoiler. Yes, after applying 7/8" tape on the perimiter, there will be excess tape on the perimiter of the spoiler itself. I did not use the Exacto-Knife to trim this excess as I wouldn't be able to get perfectly straight lines. Thus, I left this excess alone.

VERY IMPORTANT: When apply the tape, keep in mind that it is highly flexible. You must stretch and pull the tape with a bit of force to make sure you get a nice thin and tight layer along the spoiler perimeter.

Next, use your 1/2” tape and again, apply it near as close to the edge as possible (there is no lip on the left and right edges of the spoiler to use as a guide). Apply 1/2” tape OVER-LAPPING the areas in your 7/8 “ tape and trim excess off with scissors as a general estimate.

Now that you must be precise, using your Exact-O Knife, trim off the excess overlap As pictured below, you can see where I trimmed the excess overlap.

After you are finished, your spoiler should look like this with tape in all the areas. Notice how there is no longer any overlap in the tape. Go through with your fingers along all edges of the tape and press down to make sure the tape is fitted tightly.

NOTE: At least on the E90 non-M3 spoiler I have, there are two square indentions in the spoiler. I don't believe these indentions are present in the M3 spoiler. I believe these indentions are functional, because it allows any water/moisture that has gotten caught in the spoiler to drain and evaporate away. Of course, it can also be a source for water to get into the spoiler (but not likely as the holes point straight down once the spoiler is installed). Regardless, apply your 3M tape around the indentions.









No overlap of tape.


When you flip the spoiler over, you’ll notice you cannot see any tape sticking out. If you do, using your Exacto-Knife (and looking at the underside of the spoiler), trim off the excess.

I accomplished Step 6 in 30 min.

Step 7: Clean trunk area again. Wipe down your car with the quick detailer and micro-fiber towel again and allow to dry.

Step 8: Test Fitment of CF Spoiler. Do a test fitment by placing the spoiler on the trunk. It will almost auto align itself because it’s molded to fit perfectly. It’s easy to make the mistake thinking the spoiler sits on top of the trunk like OEM. It does NOT! This spoiler sits at a 45 degree angle from the trunk.

When aligning the spoiler, note how much space there is on the left and right edges so that you know how its centered.

Step 9: Prepare to Install Spoiler. Remove the back side of the 3M tape from the spoiler using the Exact-O Knife. Trust me, your finger nails are not precise enough to remove the back-side of the 3M tape. Using the Exacto-Knife, you can pry it up and peel it off with your fingers easily. If you did a good job taping in Step 6, you should be peeling off only 4 strips (2 long strips of the 7/8” and 2 short strips of the ”).

Step 10: Aligning Spoiler. Holding the spoiler on the far left and right, gently lay the spoiler (do not press down) on top of the trunk where it should be. Using your eye-balls, make sure the spoiler is aligned both horizontally and vertically. If you make a mistake, simply lift the spoiler upwards and re-align. The far left and right edges should have the same distance from the edge of the CF spoiler to the edge of the trunk lid.

Step 11: Pressing DOWN on Spoiler. Once you are satisfied with the placement, press the spoiler down on the top edges first (edges nearest to rear window) in small increments until it is all press down.

Step 12: Press Foward on Spoiler. Press forward (towards the car) on the rear edge of the spoiler nearest the license plate in small increments.

Step 13: Eliminate Gaps in Corner Edges. Press down and firmly on the four corner edges of the spoiler. This is the area where most installs go awry and have gaps. Be sure you have sufficiently taped these corner edges back in Step 6.

I accomplished Steps 7-13 in 15 min.

Step 14: Hold Spoiler in Place. With the 2” wide painter’s tape, tape the spoiler VERY TIGHTLY to the car. Tape the top portion of the trunk first and work the tape to the rear. Notice how I purposely left air spaces in the tape on the rear just under the spoiler. This is how you achieve that tight fit.







Step 15: Hold down Corner Edges. Tape down the four corner edges completely (don’t leave any air spaces this time).



I accomplished Steps 14-15 in 10 min.

Step 16: Allow 3M Tape to Melt and Bond. Park your car out in the sun for 2 hours.

Step 17: Remove all blue painter’s tape.

Step 18: Stare at your new spoiler and smile. Good job!

Final Thoughts: I had great success using the 3M tape. I do not recommend using Betalink as I've heard horror stories of it getting all over the car. Also, once the spoiler is installed using Betalink, it is permenant. Well, you could remove it, but you'll probably end up snapping your nice CF spoiler in half (so much for trying to resell). As for the the length of 3M tape, you can get away with buying the smaller length (60") of the 1/2" width tape. For the 7/8" width tape, you definitely want to buy the 180" as you will use a lot of it. The roll should be enough for two applies in case you mess up and want to redo parts of it.

Fear not that this thing will be prone to blowing off at highway speeds or theft. After the spoiler is installed, if I grab the spoiler and wiggle, the spoiler does not budge...but the entire back end of the car starts shaking. It is stuck on there pretty tight.



No gaps. Can't see the 3M tape. All edges and corners are sealed.








As you can see with BMW Part No. 51-71-0-411-575, this style of spoiler installs on the OEM location on top of the trunk as well as the curvy portion of the trunk and justs out at a 45 degree angle (very Vorsteiner-like styling).



Last edited by frankzlin79; 10-07-2012 at 11:53 PM.
frankzlin79 is offline   United_States
0
Reply With Quote
      06-25-2011, 12:19 PM   #2
M3roar
Lieutenant
 
M3roar's Avatar
 
Drives: 2010 e92 M3
Join Date: Sep 2009
Location: Houston, Texas

Posts: 450
iTrader: (0)

Garage List
2010 BMW M3 e92  [4.67]
1998 BMW M3  [4.25]
Nice write up!
__________________
"Out of pure habit, I gave a black M3 a point by on the way home from work this evening." - ThunderMoose
M3roar is offline  
0
Reply With Quote
      06-25-2011, 12:20 PM   #3
tinpot
Captain
 
Drives: 05 E46 M3
Join Date: Sep 2009
Location: Houston, Texas

Posts: 679
iTrader: (3)

The spoiler looks very nice and the fitment looks OEM. Btw, the new plate looks good too
__________________
FOR SALE: Vorsteiner Trunk | Arkym CF Hood (PM me) | Tinted Taillights (PM me) | AutoPower Rollbar (PM Me)
tinpot is offline   United_States
0
Reply With Quote
      06-25-2011, 12:21 PM   #4
GOLFFRR
BimmerPost Supporting Vendor

 
GOLFFRR's Avatar
 
Drives: Golf Cart
Join Date: Mar 2009
Location: Solvang, CA/Camarillo, CA

Posts: 15,984
iTrader: (4)

very well done. Looks great.
__________________

BEFORE YOU BUY YOUR NEXT BMW, EMAIL US FIRST WE CAN HOOK YOU UP!
Need a quote or assistance from David? GO HERE-->http://www.bimmerdavid.com/#!blank/c1r1e
Davids current ED Special M235/228--> http://www.2addicts.com/forums/showthread.php?t=1013211
GOLFFRR is online now  
0
Reply With Quote
      06-25-2011, 12:22 PM   #5
frankzlin79
Lieutenant Colonel
 
frankzlin79's Avatar
 
Drives: 2014 335i M Sport
Join Date: Oct 2008
Location: Houston, Texas

Posts: 1,619
iTrader: (5)

tinpot: Fitment looks OEM, because it is OEM lol. And yeah, my plate is pretty cool if I must say so myself.
frankzlin79 is offline   United_States
0
Reply With Quote
      06-25-2011, 12:32 PM   #6
///M Ryder
Grown Azz Man
 
///M Ryder's Avatar
 
Drives: 2011.5 Dinan ///M3
Join Date: Dec 2010
Location: Sugar Land

Posts: 2,443
iTrader: (5)

Damn you Frank ...now I'm thinking of getting one. That could be a nice compliment to the Arkym rear diffuser I'm about to order. Great job on the install............Phil
__________________
2011.5 E92 Dinan///M3: SSII DCT- Comp, Prem 2, and Conv Pkg, Heated Seats, Enhanced Prem Sound, Edition Grills/Gills, M Performance Steering Wheel, Carbon Fiber Performance Spoiler, BMW Pedals, Dinan Exhaust, Dinan X-Pipe, Dinan Carbon Fiber Intake, Dinan Software Tune, Dinan DCT Tune, Dinan Pulley Kit, Dinan CH-R Wheels, Dinan Carbon Fiber Strut Tower Braces, Arkym Lip, IND M5 Mirror Caps, Carbon Reflectors, Lux H8 V3, Brembo 365mm BBK
///M Ryder is offline   United_States
0
Reply With Quote
      06-25-2011, 12:36 PM   #7
frankzlin79
Lieutenant Colonel
 
frankzlin79's Avatar
 
Drives: 2014 335i M Sport
Join Date: Oct 2008
Location: Houston, Texas

Posts: 1,619
iTrader: (5)

You should get the BMW Performance Spoiler if you want OEM fit. Otherwise, the Arkym Spoiler is pretty cool looking too. The Arkym spoiler is a bit larger than the BMW Performance Spoiler and more squarish in shape.
frankzlin79 is offline   United_States
0
Reply With Quote
      06-25-2011, 05:29 PM   #8
MK599
I like Polar Bears..
 
MK599's Avatar
 
Drives: E92 M3
Join Date: Nov 2010
Location: Toronto, Canada

Posts: 399
iTrader: (10)

Didnt read the whole thing as it was very long.
But as an added step to whoever is worried that 3M tape is not strong enough, go out and buy 3M adhesion promotor. It comes in small toilette packages and its a moist sponge which you wipe down the area you plan on sticking the tape right before the install.
Great write up!
__________________
///Matthew.
@MK599
MK599 is offline   Canada
0
Reply With Quote
      06-25-2011, 05:53 PM   #9
frankzlin79
Lieutenant Colonel
 
frankzlin79's Avatar
 
Drives: 2014 335i M Sport
Join Date: Oct 2008
Location: Houston, Texas

Posts: 1,619
iTrader: (5)

Nice. Didn't know about 3M adhesion promotor. I didn't have any issues installing it without the promotor. I also note that I didn't need a heat gun or a hair dryer to remove the OEM spoiler. Just the plastic ribbon and my kung-fu grip!
frankzlin79 is offline   United_States
0
Reply With Quote
      06-25-2011, 11:43 PM   #10
tinpot
Captain
 
Drives: 05 E46 M3
Join Date: Sep 2009
Location: Houston, Texas

Posts: 679
iTrader: (3)

Quote:
Originally Posted by frankzlin79 View Post
tinpot: Fitment looks OEM, because it is OEM lol. And yeah, my plate is pretty cool if I must say so myself.
OK, smart arse. The install looks OEM Nice job!
__________________
FOR SALE: Vorsteiner Trunk | Arkym CF Hood (PM me) | Tinted Taillights (PM me) | AutoPower Rollbar (PM Me)
tinpot is offline   United_States
0
Reply With Quote
      06-27-2011, 07:56 PM   #11
BlueMonde
F33DM3
 
BlueMonde's Avatar
 
Drives: E92 ///M3
Join Date: Aug 2007
Location: Houston

Posts: 298
iTrader: (1)

Nice Write up Frank,
Added it to the wish list..
__________________
BlueMonde is offline   United_States
0
Reply With Quote
      07-04-2011, 09:39 AM   #12
frankzlin79
Lieutenant Colonel
 
frankzlin79's Avatar
 
Drives: 2014 335i M Sport
Join Date: Oct 2008
Location: Houston, Texas

Posts: 1,619
iTrader: (5)

Thanks. It's been over a week and the spoiler is holding up nicely.
frankzlin79 is offline   United_States
0
Reply With Quote
      07-04-2011, 04:08 PM   #13
swamp2
Lieutenant General
 
swamp2's Avatar
 
Drives: E92 M3
Join Date: Sep 2006
Location: San Diego, CA USA

Posts: 10,200
iTrader: (1)

Great write up!

Comment: The 3M tape does not require heat to set up/cure/bond. This the entire part with the blue tape and sitting in the sun is not required.
swamp2 is offline   United_States
0
Reply With Quote
      07-18-2011, 06:24 PM   #14
warp10
Captain
 
warp10's Avatar
 
Drives: 2011 M3 Jet Black:ZCP, ZCV, ZP
Join Date: May 2011
Location: Atlanta, Ga

Posts: 671
iTrader: (2)

Garage List
2011 M3  [5.00]
2011 28i X3  [0.00]
Will the spoiler in the photo also fit on the E92 M3? I really like that it flows with the trunk but want to make sure that it will fit on the coupe. Thx for the help!
warp10 is offline  
0
Reply With Quote
      07-19-2011, 08:37 PM   #15
frankzlin79
Lieutenant Colonel
 
frankzlin79's Avatar
 
Drives: 2014 335i M Sport
Join Date: Oct 2008
Location: Houston, Texas

Posts: 1,619
iTrader: (5)

Quote:
Originally Posted by adamsekulow View Post
Will the spoiler in the photo also fit on the E92 M3? I really like that it flows with the trunk but want to make sure that it will fit on the coupe. Thx for the help!
I'm not sure. The E90 and E92 trunks look identical to me. But the fact that there are two different part numbers for the E90 BMW Performance Spoiler and E92 BMW Performance spoiler makes it see like the spoiler isn't the same fit.
frankzlin79 is offline   United_States
0
Reply With Quote
      11-25-2011, 07:48 PM   #16
Mr. ///M3 RD
Major General
 
Mr. ///M3 RD's Avatar
 
Drives: E350 & 280 SL on Weekends :)
Join Date: May 2010
Location: GTA, Ontario - Canada

Posts: 7,863
iTrader: (0)

Garage List
Thank you !!!!

frankzlin79

Thanks for the excellent write up and photographs. This convinced me to order mine and install it as a winter project on my brand new 2012 e92 M3

Thanks again


Rolf-Dieter
__________________
Cheers, Rolf-Dieter

Life will take us to some interesting places, fortunately The ///M3 will too with a many of us know this very well
---> Click here for some good stuff I found
Mr. ///M3 RD is offline   Canada
0
Reply With Quote
      11-25-2011, 08:37 PM   #17
mkPOTO
Mr. Nice Says Hello
 
mkPOTO's Avatar
 
Drives: 1999 528I
Join Date: Dec 2008
Location: USA

Posts: 15,487
iTrader: (23)

Garage List
Very nice write up
__________________

EVOLVE BMW E92 M3
mkPOTO is offline  
0
Reply With Quote
      11-26-2011, 01:35 PM   #18
frankzlin79
Lieutenant Colonel
 
frankzlin79's Avatar
 
Drives: 2014 335i M Sport
Join Date: Oct 2008
Location: Houston, Texas

Posts: 1,619
iTrader: (5)

It's been 5 months and spoiler hasn't budged.
frankzlin79 is offline   United_States
0
Reply With Quote
      07-19-2012, 11:30 PM   #19
MDCTFTW
Lieutenant Colonel
 
Drives: E92 DCT
Join Date: Apr 2008
Location: Norcal

Posts: 1,974
iTrader: (0)

Pics gone?
__________________


MDCT ... so you can drive and eat a hamburger at the same time.
MDCTFTW is offline  
0
Reply With Quote
      07-21-2012, 10:59 AM   #20
frankzlin79
Lieutenant Colonel
 
frankzlin79's Avatar
 
Drives: 2014 335i M Sport
Join Date: Oct 2008
Location: Houston, Texas

Posts: 1,619
iTrader: (5)

Yeah pics gone due to shut down of MobileMe. I haven't had time to upload them elswhere.
frankzlin79 is offline   United_States
0
Reply With Quote
      07-21-2012, 11:56 AM   #21
lux
First Lieutenant
 
Drives: 2015 M3 F80 dct
Join Date: Jan 2010
Location: SoCal

Posts: 317
iTrader: (0)

Quote:
Originally Posted by frankzlin79 View Post
Yeah pics gone due to shut down of MobileMe. I haven't had time to upload them elswhere.
Please do upload again. It would be very much appreciated.
__________________
2015 F80 M3 | AW | SO | DCT | All OEM
2011 e90 M3 | SSII | FR | ZCP | DCT | Full Akra Evo | AngeliBright
lux is offline   United_States
0
Reply With Quote
      07-25-2012, 12:20 AM   #22
MDCTFTW
Lieutenant Colonel
 
Drives: E92 DCT
Join Date: Apr 2008
Location: Norcal

Posts: 1,974
iTrader: (0)

Quote:
Originally Posted by frankzlin79 View Post
Yeah pics gone due to shut down of MobileMe. I haven't had time to upload them elswhere.
I think you can edit the original thread and add attachements. I'd love to see pics since my spoiler just arrived in the mail and I want to use 3M tape instead of betalink
__________________


MDCT ... so you can drive and eat a hamburger at the same time.
MDCTFTW is offline  
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 05:50 PM.




m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST