BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Track / Autocross / Dragstrip / Driving Techniques
 
Post Reply
 
Thread Tools Search this Thread
      02-12-2012, 08:07 PM   #1
NRBRNG
Second Lieutenant
 
NRBRNG's Avatar
 
Drives: 2009 E92 M3, DCT, SG.
Join Date: Jan 2011
Location: OREGON, USA

Posts: 209
iTrader: (9)

CF backing plates, Apex inlets, ST60 cooling set-up done.

Update after first track session:
Oregon in February: 34 degrees, snow flurries, rain... We had it all. Consequently, it was road tires all day (Conti DW) and standard stoptech pads up front-not the Cobalts. I did run Cobalts in the rear on OEM calipers to help the bias which worked incredibly well. I have to say the DW's were fantastic in the cold and wet conditions. Very impressed.
Back to the brakes...Out of 5 sessions i was lucky to get 2 dry ones towards the end of the day and really get on the brakes as normal (to extent the DW's would let me). Performance was very good, good initial bite, zero fade. Best of all- MUCH cooler after sessions. Not a very scientific gauge...but just standing next to the fronts i could feel very normal heat radiating, whereas the rears were their usual furnace heat and pinging for several minutes. I will know more when the same Cobalts are front and rear and also test with heat paint.
All hoses, flanges and backing plates held up perfectly thus far.
Happy so far. Next day is March 10th. By then it should be 75 and sunny...


OK. First phase of the winter project finished and ready to test at Portland Int Raceway at the end of the month (Son of Quattrofest... Yes! RS4's...)

I have needed a solution for overheating brakes for a while now. I previously ran stock with Cobalt XR2 pads. No problems with fade, bite was great and stopping power was fantastic... just tons of heat that ultimately shortened pad life (1-2 days max).
ST60's were the stoppers chosen and I decided to do everything at once with the ducting set-up. The work was completed by our outstanding local shop run by Eddie Nakato- AR Auto Service in Lake Oswego, Oregon.
Bimmerworld CF backing plates ($398) http://store.bimmerworld.com/carbon-...tes-p1412.aspx
Apex inlets ($200), some ducting (not much).
The cost of molding and amortizing it is clearly tough with these prices, but hey if they get the job done, it's less than the cost of two sets of pads...

CF plates: Well, they are light and CF, but the fit definately needed some work...lots of grinding and sanding around the outside in order to fit. But fit they do. We are not sure how long they will last without some reinforcement around the pipe area that exits to the ducting though...
The Apex inlets look good, good molding, nice and stealthy tucked away, but at $200 clearly the tooling costs outweigh the material costs but that is totally normal these days. Ducting fits great to these inlets.

I am running the Stoptech street perf pads on the road and for the track Cobalt XR2's that are available for the ST60's. This combo should stop a bus.
Can't wait!

Cheers, Mark
Attached Images
     
__________________
SG, DCT- Diffsonline 3.62 triple ramp.
MCS 2-way, GC race CP, TMS solid subframe/Diff bushings, RD sway bars, Akra catless GT4, BPM tune, welded half cage/door bars, Recaro Profi's /Schroth 6 pts, Stoptech ST60/ Cobalt XR1/2 race pads, Apex ARC 8's, Yoko A005 slicks, RKP GT4 Splitter, APR GT250 Wing, BMC filter, BW race F CAB's, Dinan R Toe Links, Mini CS battery, Aim DL, Dry-3100 pounds

Last edited by NRBRNG; 03-02-2012 at 11:02 AM. Reason: update
NRBRNG is offline  
0
Reply With Quote
      02-12-2012, 08:12 PM   #2
bigjae1976
Takes threads off topic...daily
 
bigjae1976's Avatar
 
Drives: 11 E90 M3 Individual
Join Date: Mar 2006
Location: Milwaukee, WI

Posts: 5,312
iTrader: (12)

Garage List
2004 BMW M3  [4.50]
2011 BMW E90 M3  [5.00]
2013 BMW 328i  [5.00]
Nice! Any pics of how you routed the duct from the flanges through the engine cover?
__________________


Sponsored by Momentum BMW #593...We Bleed BMW BLUE!
bigjae1976 is offline  
0
Reply With Quote
      02-12-2012, 08:28 PM   #3
klammer
Brigadier General
 
Drives: 11 spc gry m3 e90, 07 X5
Join Date: Jan 2010
Location: chicago

Posts: 3,232
iTrader: (0)

That looks real nice, well done, thanks for sharing.
__________________
mods: akra evo, dinan 3.45 diff, ess akra tune, dinan stg.3, Alcon bbk, HRE P40
klammer is offline  
0
Reply With Quote
      02-12-2012, 09:02 PM   #4
SchnellM3
Digger
 
SchnellM3's Avatar
 
Drives: 03 E46 M3, 09 E92 M3, 09 X6 50
Join Date: Jun 2009
Location: Pa

Posts: 2,616
iTrader: (5)

Garage List


How often does one need to replace the hoses, Do they last a couple weekends or a season?
__________________
2009 E92 M3 /// Melbourne Red /// Fox Red /// M DKG

Full Innotech Exhaust - DINAN Intake - IND Engine Bay Appearance - IND Hand Stitched Boot Covers - and much more....
SchnellM3 is offline   United_States
0
Reply With Quote
      02-12-2012, 09:45 PM   #5
mastek
e36s54, F10M5, e70X5d
 
mastek's Avatar
 
Drives: slow
Join Date: Aug 2008
Location: Los Angeles, CA

Posts: 1,548
iTrader: (15)

That seems like too many turns and twists for effective direct airflow.
Have you taken this to a track where you had overheat issues to see if it solves the problem?
mastek is offline   United_States
0
Reply With Quote
      02-13-2012, 01:55 AM   #6
bigjae1976
Takes threads off topic...daily
 
bigjae1976's Avatar
 
Drives: 11 E90 M3 Individual
Join Date: Mar 2006
Location: Milwaukee, WI

Posts: 5,312
iTrader: (12)

Garage List
2004 BMW M3  [4.50]
2011 BMW E90 M3  [5.00]
2013 BMW 328i  [5.00]
Quote:
Originally Posted by mastek View Post
That seems like too many turns and twists for effective direct airflow.
Have you taken this to a track where you had overheat issues to see if it solves the problem?
I'd take anything at this point. Even if it was a trickle of air.
__________________


Sponsored by Momentum BMW #593...We Bleed BMW BLUE!
bigjae1976 is offline  
0
Reply With Quote
      02-13-2012, 10:45 AM   #7
klammer
Brigadier General
 
Drives: 11 spc gry m3 e90, 07 X5
Join Date: Jan 2010
Location: chicago

Posts: 3,232
iTrader: (0)

Quote:
Originally Posted by bigjae1976 View Post
I'd take anything at this point. Even if it was a trickle of air.
Agreed.
__________________
mods: akra evo, dinan 3.45 diff, ess akra tune, dinan stg.3, Alcon bbk, HRE P40
klammer is offline  
0
Reply With Quote
      02-13-2012, 10:49 AM   #8
quads
Lieutenant Colonel
 
Drives: bac mono
Join Date: Apr 2010
Location: racetrack

Posts: 1,644
iTrader: (3)

also keep in mind that as the rotors spin, it's creating a fan/vacuum effect where it's pulling air from the center. So airflow is not just dependent on front air pressure from the opening in the duct.

One thing to keep in mind - if it's a dual purpose car and you're driving in very cold temps you may want to tape up the ducts when not at track.

When I was doing one lap at daytona, at the end of the oval going 150mph the brakes would cool off enough so that I'd have to apply the brakes a little to warm them back up to get the pads to bite hard
quads is offline  
0
Reply With Quote
      02-13-2012, 10:50 AM   #9
Erhan
Colonel
 
Erhan's Avatar
 
Drives: Cooper S
Join Date: Oct 2008
Location: Seattle

Posts: 2,466
iTrader: (0)

Quote:
Originally Posted by mastek View Post
That seems like too many turns and twists for effective direct airflow.
Have you taken this to a track where you had overheat issues to see if it solves the problem?
+1. From what I understand, he got the BBK and the ducting at the same time, so it won't be easy to tell if the ducting is working well.

OP: Just an idea (may not be a good one): Instead of routing the ducting behind and top of that bar in pic 2, why not route through the bottom of it, and then tie it to the bar? Also, is there any other material that is less flexible than the one you're using?
__________________
2011 MINI Cooper S
previous cars: E92 M3, Z4MC, Z4 Roadster, E36 328 Sedan
Erhan is offline   United_States
0
Reply With Quote
      02-13-2012, 12:40 PM   #10
THE TECH
BimmerPost Supporting Vendor

 
THE TECH's Avatar
 
Drives: BPMsport 2012 E92 M3
Join Date: Jun 2011
Location: Kansas

Posts: 13,065
iTrader: (44)

Garage List
Send a message via AIM to THE TECH Send a message via Skype™ to THE TECH
Nice.
__________________
THE TECH is offline   United_States
0
Reply With Quote
      02-13-2012, 04:50 PM   #11
zsapphire7
Colonel
 
zsapphire7's Avatar
 
Drives: 08 e92 M3
Join Date: Oct 2007
Location: SF Bay Area

Posts: 2,289
iTrader: (21)

Quote:
Originally Posted by erhanh View Post
+1. From what I understand, he got the BBK and the ducting at the same time, so it won't be easy to tell if the ducting is working well.

OP: Just an idea (may not be a good one): Instead of routing the ducting behind and top of that bar in pic 2, why not route through the bottom of it, and then tie it to the bar? Also, is there any other material that is less flexible than the one you're using?
OP can just tape off the duct run it hard. then repeat with the tape gone to determine the difference
zsapphire7 is offline   United_States
0
Reply With Quote
      02-13-2012, 06:02 PM   #12
Erhan
Colonel
 
Erhan's Avatar
 
Drives: Cooper S
Join Date: Oct 2008
Location: Seattle

Posts: 2,466
iTrader: (0)

Quote:
Originally Posted by zsapphire7 View Post
OP can just tape off the duct run it hard. then repeat with the tape gone to determine the difference
d'oh.. yes
__________________
2011 MINI Cooper S
previous cars: E92 M3, Z4MC, Z4 Roadster, E36 328 Sedan
Erhan is offline   United_States
0
Reply With Quote
      02-13-2012, 08:53 PM   #13
NRBRNG
Second Lieutenant
 
NRBRNG's Avatar
 
Drives: 2009 E92 M3, DCT, SG.
Join Date: Jan 2011
Location: OREGON, USA

Posts: 209
iTrader: (9)

Thanks for the thoughts and comments. All are good.
The pic of the ducting that looks too bent is actually not that bad. There's really hardly any compression. We looked at various routing options-including the many already tried on this forum-and this was by far the best. Putting it underneath likely gets in the way of that big round black thing!

It's a process right?..look for solutions, try them, adapt them.

I'll know more in a few weeks!

Cheers.
__________________
SG, DCT- Diffsonline 3.62 triple ramp.
MCS 2-way, GC race CP, TMS solid subframe/Diff bushings, RD sway bars, Akra catless GT4, BPM tune, welded half cage/door bars, Recaro Profi's /Schroth 6 pts, Stoptech ST60/ Cobalt XR1/2 race pads, Apex ARC 8's, Yoko A005 slicks, RKP GT4 Splitter, APR GT250 Wing, BMC filter, BW race F CAB's, Dinan R Toe Links, Mini CS battery, Aim DL, Dry-3100 pounds
NRBRNG is offline  
0
Reply With Quote
      02-13-2012, 09:22 PM   #14
klammer
Brigadier General
 
Drives: 11 spc gry m3 e90, 07 X5
Join Date: Jan 2010
Location: chicago

Posts: 3,232
iTrader: (0)

Good work. Keep us posted...
__________________
mods: akra evo, dinan 3.45 diff, ess akra tune, dinan stg.3, Alcon bbk, HRE P40
klammer is offline  
0
Reply With Quote
      02-13-2012, 10:10 PM   #15
mastek
e36s54, F10M5, e70X5d
 
mastek's Avatar
 
Drives: slow
Join Date: Aug 2008
Location: Los Angeles, CA

Posts: 1,548
iTrader: (15)

Quote:
Originally Posted by bigjae1976 View Post
I'd take anything at this point. Even if it was a trickle of air.
true dat
mastek is offline   United_States
0
Reply With Quote
      02-14-2012, 08:46 AM   #16
Gearhead999s
Major General
 
Gearhead999s's Avatar
 
Drives: E93 335is(wifes)E92 M3
Join Date: Apr 2007
Location: Toronto

Posts: 6,696
iTrader: (0)

Use the Heat sensitive paint on the rotors & temp stickers on your calipers to determine what temperature you are operating at.This way you can determine how effective your cooling ducts are.Anything else is guesswork.

http://www.apracing.com/info/info.as...emperatures_44


Last edited by Gearhead999s; 02-14-2012 at 10:19 AM.
Gearhead999s is offline  
0
Reply With Quote
      02-14-2012, 09:18 AM   #17
Richbot
Lieutenant Colonel
 
Drives: Jerez Black E90
Join Date: Sep 2007
Location: STL

Posts: 1,990
iTrader: (2)

Quote:
Originally Posted by Gearhead999s View Post
Use the Heat sensitive paint on the rotors & temp stickers on your calipers to determine what tempatures you are operating at.This way you can determine how effective your cooling ducts are.Anything else is guesswork.

http://www.apracing.com/info/info.as...emperatures_44
+1.
__________________
Richbot is offline  
0
Reply With Quote
      02-16-2012, 12:53 AM   #18
NRBRNG
Second Lieutenant
 
NRBRNG's Avatar
 
Drives: 2009 E92 M3, DCT, SG.
Join Date: Jan 2011
Location: OREGON, USA

Posts: 209
iTrader: (9)

Great call on the heat paint guys. thanks. I have seen this used before but never used it myself so far.
Time to try the science route...
__________________
SG, DCT- Diffsonline 3.62 triple ramp.
MCS 2-way, GC race CP, TMS solid subframe/Diff bushings, RD sway bars, Akra catless GT4, BPM tune, welded half cage/door bars, Recaro Profi's /Schroth 6 pts, Stoptech ST60/ Cobalt XR1/2 race pads, Apex ARC 8's, Yoko A005 slicks, RKP GT4 Splitter, APR GT250 Wing, BMC filter, BW race F CAB's, Dinan R Toe Links, Mini CS battery, Aim DL, Dry-3100 pounds
NRBRNG is offline  
0
Reply With Quote
      02-10-2013, 05:58 PM   #19
Kurt_OH
Lieutenant
 
Kurt_OH's Avatar
 
Drives: E90 M3 ZCP
Join Date: May 2008
Location: Columbus, OH

Posts: 512
iTrader: (0)

Found some heat paint on Amazon.com. $80 for one ounce! Ouch, didn't see that coming.
__________________
... a glorious V8 that screamed and hollered as the revs rose and then howled in an orgy of what sounded like BDSM ecstasy as it neared the red line.
Well, you can forget all that. The new car is fitted with a turbocharged straight six. Turbocharging? In an M car? Thatís like putting gravy on an ice cream.
- Jeremy Clarkson, discussing the S65 and then S55 M3 engines.
Kurt_OH is offline   United_States
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 04:50 AM.




m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST