Rub / No Rub Index - Page 5

THE TECH · 07-11-2012, 08:11 AM

275/30 and 305/30 on 19x9.5 +32 and 19x11 +25. 10mm spacer on front. Rears def rub. Fronts, I haven't really noticed anything yet.

meko · 07-15-2012, 09:26 AM

What did you end up doing with your spacers? I'm in the same position, but I have not opened up the 15mm spacers yet. I put the 12.5 in the rear, but I'm thinking of moving them to the front and exchanging the 15 for 10's. Problem is Turner says 10mm could be a problem, yet I see many people running 10mm. What do you think and is 10mm a problem at all on our cars

Quote:

Originally Posted by dbyrd

Car: 2008 E90
Wheels: OEM gunmetal 18"
Spacers: 15mm front, 12.5mm rear
Tires / Miles: Michelin PSS - (F) 245/40/18, (R) 265/40/18; New Tires
Suspension: OEM
Alignment: (F) Factory spec (R) Factory spec
Fender Modifications: (F) None (R) None
Rubbing?: Slight rubbing in rear at speed over large compressions. No rubbing in front.

Trade my new 12.5mm Turner Spacers for your 10mm spacers?

m3peat · 07-17-2012, 01:17 AM

Yokohama AD08's: 275/30 and 295/30 on E92 comp pkg, no spacers and no rubbing so far (street and autox). I was worried it would rub but so far, nothing. Looks great and handling was amazing on the autox course (compared to stock PS2's).

I do have the pins pulled up front.

dinkman · 07-23-2012, 01:36 PM

Quote:

Originally Posted by 808MGuy

Car: 09 E90

Wheels w/ Offsets: HRE P40 - (F) 20x9 +28, (R) 20x10.5 +28

Spacers: None

Tires / Miles: Vredestein - (F) 255/30/20, (R) 285/30/20; New Tires

Suspension: Eibach

Alignment: (F) Factory spec (R) Factory spec

Fender Modifications: (F) None (R) None

Rubbing?: None

First of all... sweet wheels and setup in general.
second of all, i just pulled the trigger on the same springs after seeing your post even though I wasn't going to drop mine due to rubbing concerns. fingers crossed for the same outcome you had! thank you for posting

ssabripo · 07-23-2012, 02:26 PM

Car: '11/75 E90 M3

Wheels : 359M competition

Spacers: MS 15mm front, MS 10mm rear

Tires / Miles: Michelin PSS - (R) 275/35/19, (F) 255/35/19

Suspension: Stock

EDC Setting: All

Alignment: Stock

Rubbing?: (F) None. (R) Yes, on a loaded car over really BIG bumps; otherwise, no rubbing.

geneatals · 07-23-2012, 11:49 PM

Quote:

Originally Posted by ssabripo

Car: '11/75 E90 M3

Wheels : 359M competition

Spacers: MS 15mm front, MS 10mm rear

Tires / Miles: Michelin PSS - (R) 275/35/19, (F) 255/35/19

Suspension: Stock

EDC Setting: All

Alignment: Stock

Rubbing?: (F) None. (R) Yes, on a loaded car over really BIG bumps; otherwise, no rubbing.

good to know...I'd like to get the same tire size once I burn thru the OEMs and was wondering if my 12.5mm spacers (all around) would still work..fron your info sounds like it will...

tlp · 07-24-2012, 12:01 AM

Quote:

Originally Posted by geneatals

good to know...I'd like to get the same tire size once I burn thru the OEMs and was wondering if my 12.5mm spacers (all around) would still work..fron your info sounds like it will...

Rear ZCP + PSS 275/35 + 12.5mm spacers will definitely rub. 10mm is the max and you will still get an occasional rub over large g loaded bumps.

Siciliano611 · 07-24-2012, 02:41 PM

Quote:

Originally Posted by tlp

Rear ZCP + PSS 275/35 + 12.5mm spacers will definitely rub. 10mm is the max and you will still get an occasional rub over large g loaded bumps.

does MS make a smaller spacer than 10mm, like a 8 or 7mm one? Or is that just useless....I just dropped my car on B&G springs (1" front, .5" rear) and have ZCP wheels and very soon will be upping size to a 275/35 PSS tire. Should I just go with no spacers at all in the back then?

THE TECH · 07-24-2012, 02:43 PM

Quote:

Originally Posted by Siciliano611

does MS make a smaller spacer than 10mm, like a 8 or 7mm one? Or is that just useless....I just dropped my car on B&G springs (1" front, .5" rear) and have ZCP wheels and very soon will be upping size to a 275/35 PSS tire. Should I just go with no spacers at all in the back then?

They make a 3mm and a 5mm.

Siciliano611 · 07-24-2012, 02:47 PM

Quote:

Originally Posted by THE TECH

They make a 3mm and a 5mm.

Is there a problem buying a 10mm spacer (or smaller i assume) though because i read the sticky and it seems it creates a problem being it doesnt sit flush against the hub and can cause vibration

THE TECH · 07-24-2012, 02:48 PM

Quote:

Originally Posted by Siciliano611

Is there a problem buying a 10mm spacer (or smaller i assume) though because i read the sticky and it seems it creates a problem being it doesnt sit flush against the hub and can cause vibration

Yes, this can cause an issue. Guess you just have to decide what you want most.

Siciliano611 · 07-24-2012, 02:49 PM

Quote:

Originally Posted by THE TECH

Yes, this can cause an issue. Guess you just have to decide what you want most.

What are you currently running (tire,spring, spacer specs?)

THE TECH · 07-24-2012, 02:51 PM

Quote:

Originally Posted by Siciliano611

What are you currently running (tire,spring, spacer specs?)

I was running OEM GTS wheels with OEM PS2 tire sizes with 18mm front and 15mm rear spacers.

On the car right now are BBS LM 275/30/19 front with a 10mm spacer and 305/30/19 rear PSS tires.

This is all on H&R springs.

Siciliano611 · 07-24-2012, 02:53 PM

Quote:

Originally Posted by THE TECH

I was running OEM GTS wheels with OEM PS2 tire sizes with 18mm front and 15mm rear spacers.

On the car right now are BBS LM 275/30/19 front with a 10mm spacer and 305/30/19 rear PSS tires.

This is all on H&R springs.

Are you having any vibration/humming with the 10mm spacer?

THE TECH · 07-24-2012, 02:54 PM

Quote:

Originally Posted by Siciliano611

Are you having any vibration/humming with the 10mm spacer?

Nope but this is a BBS spacer made to be used with their wheels. I don't know how it compares to an MS or other spacer of the same width.

Archiebabes · 07-24-2012, 10:55 PM

Anybody running a 10mm spacer on the front with19x9.5 +21 offset wheels with Nitto Invo 255/35/19 tires?

Lowered on RD Sport springs.

Any rubbing issues?

ssabripo · 07-25-2012, 08:27 AM

Quote:

Originally Posted by geneatals

good to know...I'd like to get the same tire size once I burn thru the OEMs and was wondering if my 12.5mm spacers (all around) would still work..fron your info sounds like it will...

Quote:

Originally Posted by tlp

Rear ZCP + PSS 275/35 + 12.5mm spacers will definitely rub. 10mm is the max and you will still get an occasional rub over large g loaded bumps.

exactly!

if you notice, I said mine was a 10mm rear, and I did rub slightly once when I went over my "test" bump that usually brings out the rubs if any.

de63 · 07-28-2012, 07:04 PM

Given the info in this thread sounds like this is no problem:

Just upsizing tires on an stock '11 Comp Coupe to Michelin PSS 255/35 and 275/35 from 245's and 265's. Tire shop tells me they will rub front or rear, can't remember. I say BS. What say you? TIA

geneatals · 07-29-2012, 12:38 AM

Quote:

Originally Posted by de63

Given the info in this thread sounds like this is no problem:

Just upsizing tires on an stock '11 Comp Coupe to Michelin PSS 255/35 and 275/35 from 245's and 265's. Tire shop tells me they will rub front or rear, can't remember. I say BS. What say you? TIA

fit fine, no rub..

sg///M3 · 07-30-2012, 08:48 AM

Michelin PSS 265/30/19 and 295/30/19 on 19x9 +20 and 19x10.5 +25. Lowered on Eibach springs. No rubbing as far as I can tell.

TigerJK37 · 08-02-2012, 01:12 PM

Car: 07 E90

Wheels w/ Offsets: M3 OEM 219M - (F) 18x8.5" ET29, (R) 18x9.5" ET23

Spacers: None

Tires / Miles: Michelin Pilot Sport - (F) 245/40/18, (R) 265/40/18; About 5k miles.

Suspension: OEM

EDC Setting: Normal/Sport

Alignment: OEM

Fender Modifications: (F) None (R) Yes

Rubbing?: (F) None at all. (R) Yes, only the passenger side slightly when the suspension is compressed. The fender liner is little sagging. Its a quick fix but I'm just being lazy.

Hope it helps some ppl that thinking about this set for Non-M e90.

CanAutM3 · 08-07-2012, 01:43 PM

Car: 08 E92

Wheels: OEM 220M

Spacers: None

Tires / Miles: Michelin PSS - (F) 255/35/19, (R) 275/35/19; New

Suspension: OEM

EDC Setting: Comfort/Normal/Sport

Alignment: Camber - (F) -2.8 (R) -1.8; Toe - OEM

Fender Modifications: None

Rubbing?: None at all.

I will be trying out 12mm front and 5mm rear spacers shortly.

07-23-2012, 02:26 PM	#93
ssabripo HALA MADRID! Drives: camels & donkeys Join Date: Jul 2005 Location: Plantation, Fl Posts: 1,972 iTrader: (5)	Car: '11/75 E90 M3 Wheels : 359M competition Spacers: MS 15mm front, MS 10mm rear Tires / Miles: Michelin PSS - (R) 275/35/19, (F) 255/35/19 Suspension: Stock EDC Setting: All Alignment: Stock Rubbing?: (F) None. (R) Yes, on a loaded car over really BIG bumps; otherwise, no rubbing. __________________ __________________________________________________ ____________ e90 M3, Interlagos Blue / M individual two-tone, ZCP, ZP2, ZCV, DCT, ED.

07-28-2012, 07:04 PM	#106
de63 New Member Drives: '11 Comp Coupe DCT Join Date: Jul 2012 Location: ATL Posts: 16 iTrader: (0)	Will these rub? Given the info in this thread sounds like this is no problem: Just upsizing tires on an stock '11 Comp Coupe to Michelin PSS 255/35 and 275/35 from 245's and 265's. Tire shop tells me they will rub front or rear, can't remember. I say BS. What say you? TIA

08-02-2012, 01:12 PM	#109
TigerJK37 New Member Drives: Alpine white e90 Join Date: Jul 2011 Location: DMV Posts: 21 iTrader: (0)	2007 e90 with oem 219m with ps2 Car: 07 E90 Wheels w/ Offsets: M3 OEM 219M - (F) 18x8.5" ET29, (R) 18x9.5" ET23 Spacers: None Tires / Miles: Michelin Pilot Sport - (F) 245/40/18, (R) 265/40/18; About 5k miles. Suspension: OEM EDC Setting: Normal/Sport Alignment: OEM Fender Modifications: (F) None (R) Yes Rubbing?: (F) None at all. (R) Yes, only the passenger side slightly when the suspension is compressed. The fender liner is little sagging. Its a quick fix but I'm just being lazy. Hope it helps some ppl that thinking about this set for Non-M e90. Last edited by TigerJK37; 08-02-2012 at 01:35 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

07-11-2012, 08:11 AM	#89
THE TECH BimmerPost Supporting Vendor Drives: BPMsport 2012 E92 M3 Join Date: Jun 2011 Location: Kansas Posts: 11,936 iTrader: (39)	275/30 and 305/30 on 19x9.5 +32 and 19x11 +25. 10mm spacer on front. Rears def rub. Fronts, I haven't really noticed anything yet.

07-17-2012, 01:17 AM	#91
m3peat New Member Drives: 2012 E92 M3 DCT ZCP Join Date: Nov 2009 Location: San Diego, CA Posts: 26 iTrader: (0)	Yokohama AD08's: 275/30 and 295/30 on E92 comp pkg, no spacers and no rubbing so far (street and autox). I was worried it would rub but so far, nothing. Looks great and handling was amazing on the autox course (compared to stock PS2's). I do have the pins pulled up front.

07-24-2012, 10:55 PM	#104
Archiebabes Lieutenant Drives: 2008 BMW M3 Join Date: Jul 2011 Location: Van Nuys, CA Posts: 462 iTrader: (10)	Anybody running a 10mm spacer on the front with19x9.5 +21 offset wheels with Nitto Invo 255/35/19 tires? Lowered on RD Sport springs. Any rubbing issues?

07-30-2012, 08:48 AM	#108
sg///M3 Lieutenant Drives: 2008 M3 DCT Join Date: May 2008 Location: Charlotte, NC Posts: 407 iTrader: (0)	Michelin PSS 265/30/19 and 295/30/19 on 19x9 +20 and 19x10.5 +25. Lowered on Eibach springs. No rubbing as far as I can tell.

08-07-2012, 01:43 PM	#110
CanAutM3 Major Drives: 2008 E92 M3 SS2 DCT Join Date: Jan 2012 Location: Montreal Posts: 1,273 iTrader: (0) Garage List 2006 Audi S4 [0.00] 2008 BMW M3 [0.00]	Car: 08 E92 Wheels: OEM 220M Spacers: None Tires / Miles: Michelin PSS - (F) 255/35/19, (R) 275/35/19; New Suspension: OEM EDC Setting: Comfort/Normal/Sport Alignment: Camber - (F) -2.8 (R) -1.8; Toe - OEM Fender Modifications: None Rubbing?: None at all. I will be trying out 12mm front and 5mm rear spacers shortly.