BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Track / Autocross / Dragstrip / Driving Techniques
 
GetBMWParts
Post Reply
 
Thread Tools Search this Thread
      04-11-2011, 06:35 PM   #1
xchosun1x
FNG
 
xchosun1x's Avatar
 
Drives: JZB 2008 E92 M3 DCT
Join Date: Nov 2009
Location: Los Angeles

Posts: 2,131
iTrader: (9)

recommended tire pressure for advan neova ad-08?

hey guys,

I was at the track, road course, this past weekend and was curious what tire pressure settings you use.

I have a set of advan ad08's 245/275 set up

was running roughly 37f/36r psi cold

Any suggestions?
xchosun1x is offline   United_States
0
Reply With Quote
      04-11-2011, 07:11 PM   #2
wwjd15
Banned
 
Drives: 11 E92 M3 MR
Join Date: May 2009
Location: Orange County

Posts: 1,322
iTrader: (6)

If you run hard enough, you would have beated up the center of your tires at that PSI.
I run AD08's on my Porsche, IMO you should have kept them in 36-38 psi HOT. Once they get over 39 40 psi, they start losing grip and make you feel like driving on skateboard.
wwjd15 is offline   United_States
0
Reply With Quote
      04-13-2011, 12:14 AM   #3
xchosun1x
FNG
 
xchosun1x's Avatar
 
Drives: JZB 2008 E92 M3 DCT
Join Date: Nov 2009
Location: Los Angeles

Posts: 2,131
iTrader: (9)

thanks for the link TrackRat.

The chart guide was informative. I guess its something I'll have to play around with at the track.

Thank you
xchosun1x is offline   United_States
0
Reply With Quote
      04-13-2011, 11:43 AM   #4
ring007
Major
 
ring007's Avatar
 
Drives: '10 GT3RS & '13 Cayenne GTS
Join Date: Nov 2008
Location: ///Iowa

Posts: 1,031
iTrader: (13)

I use 28/26psi cold (runs 36/34psi hot) for AD08's. Has worked great for me for past 2 seasons. No issues and nice wear patterns
ring007 is offline  
0
Reply With Quote
      04-13-2011, 03:17 PM   #5
xchosun1x
FNG
 
xchosun1x's Avatar
 
Drives: JZB 2008 E92 M3 DCT
Join Date: Nov 2009
Location: Los Angeles

Posts: 2,131
iTrader: (9)

Quote:
Originally Posted by ring007 View Post
I use 28/26psi cold (runs 36/34psi hot) for AD08's. Has worked great for me for past 2 seasons. No issues and nice wear patterns
thanks for the info!

i'll try that out.

i was pushing way too much psi then.
xchosun1x is offline   United_States
0
Reply With Quote
      04-15-2011, 03:44 PM   #6
von_zoom
Captain
 
von_zoom's Avatar
 
Drives: 2010 Z06
Join Date: Apr 2009
Location: North Carolina

Posts: 913
iTrader: (0)

Quote:
I use 28/26psi cold (runs 36/34psi hot) for AD08's. Has worked great for me for past 2 seasons. No issues and nice wear patterns
What size are you using, and are they on diferent rims than your origional?

Thanks, vz
__________________


Previous Track Toy
von_zoom is offline  
0
Reply With Quote
      04-16-2011, 07:00 PM   #7
aleckzandr
Major
 
aleckzandr's Avatar
 
Drives: 2009 n54 e92 xi, 6mt, kw v3
Join Date: Sep 2009
Location: Colorado, USA

Posts: 1,275
iTrader: (0)

Garage List
2009 335xi  [4.22]
Quote:
Originally Posted by von_zoom View Post
What size are you using, and are they on diferent rims than your origional?

Thanks, vz
+1 And do tell us your camber. I would destroy my front tires' outside shoulder with pressure so low. I ran my AD08s at 46-48 hot, 38 cold with -2.2d front camber last year, and tire wear was still just at the triangle markers.

Thanks for link TrackRat.

Edit: I do want try lower pressures this year because I've increased negative camber all around.
__________________
KWs - Vorshlags - APEX EC-7s - "My garage" has suspension install pictures.
_____________________

Last edited by aleckzandr; 04-16-2011 at 07:07 PM.
aleckzandr is offline   United_States
0
Reply With Quote
      04-16-2011, 09:58 PM   #8
rzm3
Moderator
 
rzm3's Avatar
 
Drives: E92 M3
Join Date: Aug 2007
Location: USA

Posts: 4,585
iTrader: (14)

The two key things you want to look at are:

1) Tire temperature across the width. If the tire is over pressurized, the center will be much hotter than the outer and inner edges.

2) Roll over on the outside edge. This can be caused both by under inflation and inadequate camber.

I just bought my second set of AD08 and I typically ran low to mid 30s psi cold.
__________________
E92 M3 DCT - AiM EVO4 Data Logger / AiM SmartyCam HD / KW Competition 2-Way / OMP ARS Racing Seats / Brembo GT 365 / Pagid Yellow RS-29 / Rear Seats Delete
rzm3 is offline  
0
Reply With Quote
      04-17-2011, 07:15 AM   #9
elh0102
Captain
 
Drives: E92 M3
Join Date: Apr 2010
Location: USA

Posts: 704
iTrader: (0)

Unless you are an accomplished driver who can discern very fine tuning adjustments, I think you will find that anything in the 36-38 range (hot) will give good results. Good enough that you can put it out of your mind and focus on other stuff.
__________________
2011 Space Gray Coupe, DCT, ZCP, StopTech ST-60/ST-40 BBK.
elh0102 is offline  
0
Reply With Quote
      04-19-2011, 10:31 AM   #10
ring007
Major
 
ring007's Avatar
 
Drives: '10 GT3RS & '13 Cayenne GTS
Join Date: Nov 2008
Location: ///Iowa

Posts: 1,031
iTrader: (13)

I've used both 265/30 and 275/30 setups on a square set of 9.5" 220 rears.

Quote:
Originally Posted by von_zoom View Post
What size are you using, and are they on diferent rims than your origional?

Thanks, vz
ring007 is offline  
0
Reply With Quote
      04-19-2011, 10:39 AM   #11
ring007
Major
 
ring007's Avatar
 
Drives: '10 GT3RS & '13 Cayenne GTS
Join Date: Nov 2008
Location: ///Iowa

Posts: 1,031
iTrader: (13)

-2.5 camber in front using Dinan camber plates and -2.3 rear I believe. My setups have constant temps across the tread, good wear patterns, and outside shoulder wear just takes off the tip of the wear triangle. I have yet to run across anyone tracking a M3 using hot temps as high as yours, but if it works for you, that's great.

Quote:
Originally Posted by aleckzandr View Post
+1 And do tell us your camber. I would destroy my front tires' outside shoulder with pressure so low. I ran my AD08s at 46-48 hot, 38 cold with -2.2d front camber last year, and tire wear was still just at the triangle markers.

Thanks for link TrackRat.

Edit: I do want try lower pressures this year because I've increased negative camber all around.
ring007 is offline  
0
Reply With Quote
      04-28-2011, 01:45 AM   #12
xchosun1x
FNG
 
xchosun1x's Avatar
 
Drives: JZB 2008 E92 M3 DCT
Join Date: Nov 2009
Location: Los Angeles

Posts: 2,131
iTrader: (9)

I ran a few sessions at LVMS during m fest. I ran 32 cold and kept a consistent 38 psi hot. The tires performed much better. Thanks for the help and suggestions everyone.
xchosun1x is offline   United_States
0
Reply With Quote
      05-02-2011, 09:17 AM   #13
saildoc
Private First Class
 
saildoc's Avatar
 
Drives: 2012 Porsche Cayman R
Join Date: Apr 2007
Location: oklahoma city

Posts: 178
iTrader: (1)

depends

I ran mine in the 265/35 and 285/30 18 sizes in Texas and Oklahoma where the track temps run in 100+ degrees pretty quickly. Cold temps are really academic-when warm my set up was happy at 38-39. I checked the sidewall wear pattern to make sure I was just getting out the wear chevrons. I have pics of them in the for sale section. If you are too low with pressure you will roll over too much and the chevrons will show abrasions, if too high it wont roll over enough and your contact size will be too small. Cold temps for me on those hot tracks were around 34-36 but it varied so much depending on when I checked them. You will need to adjust them a lot to find your sweet spot. Good luck-love those tires.
saildoc is offline  
0
Reply With Quote
      05-03-2011, 03:23 PM   #14
gixxer_kidd
Major
 
Drives: e92 m3
Join Date: Dec 2008
Location: NNJ

Posts: 1,398
iTrader: (11)

Garage List
2008 m3  [5.00]
The people at trackside performance (partner for Yokohama Tire Corporation's North American motorsport programs) told me to run them 38 hot. Seemed to work fine for me at NJMP for me.
gixxer_kidd is offline  
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 07:49 AM.




m3post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST