Sponsored by The Tire Rack

[wwjd15]

Can I use 18x10.5 et20/22 on front paired with 285/35 18?

According to calculator:
1 Package is 9 mm (0.4'') closer to suspension/brakes components. Acceptable for most cars.
2 Package will stick out 31 mm (1.2'') farther. Make sure that you have enough room under the fender. If not, consider narrower tires or higher offset.

Figures are base on ZCP front wheels, 19x9 et31, 245/35 19

[Sean05]

I see u bought the the TE37sl with a square set up its ok to run on a m3 but having 10.5 with 20 offset ur wheels will fit but the wheels will stick out a bit. Running 285 will difinately come out on stock set up u need massive camber i u want to run 285 and most likely it will rub when turning ur wheel...

Originally Posted by wwjd15

Can I use 18x10.5 et20/22 on front paired with 285/35 18?

According to calculator:
1 Package is 9 mm (0.4'') closer to suspension/brakes components. Acceptable for most cars.
2 Package will stick out 31 mm (1.2'') farther. Make sure that you have enough room under the fender. If not, consider narrower tires or higher offset.

Figures are base on ZCP front wheels, 19x9 et31, 245/35 19

[wwjd15]

Originally Posted by Sean05

I see u bought the the TE37sl with a square set up its ok to run on a m3 but having 10.5 with 20 offset ur wheels will fit but the wheels will stick out a bit. Running 285 will difinately come out on stock set up u need massive camber i u want to run 285 and most likely it will rub when turning ur wheel...

Thank you for reply. I get a pair only. I'll try it out once my tires arrive