Aggressive Fitment Thread - Page 8

Pcemkr · 05-21-2012, 07:18 PM

Quote:

Originally Posted by Julius@Style77

leemik is the only one driving it and it doesn't rub for him.
He did contemplate going lower but the New England roads already ripped his front lip off and he is staying at the height he is at right now.

I agree that I'd love to it slammed...

I used to live up there. No excuses!

Julius@Style77 · 05-21-2012, 07:48 PM

Quote:

Originally Posted by Pcemkr

I used to live up there. No excuses!

You got me...

No excuses.

Vegas_Sirk · 05-25-2012, 04:27 PM

So I know some 11.5" rear set ups are running around in here, but does anyone know the offsets???

Also anyone pull of a 12" rear????

Pcemkr · 05-25-2012, 04:31 PM

Quote:

Originally Posted by Vegas_Sirk

So I know some 11.5" rear set ups are running around in here, but does anyone know the offsets???

Also anyone pull of a 12" rear????

StretchNpoke has 12.5" on an E92 335i... non-M fenders nonetheless.

Vegas_Sirk · 05-25-2012, 04:32 PM

Quote:

Originally Posted by Pcemkr

StretchNpoke has 12.5" on an E92 335i... non-M fenders nonetheless.

That has to be over the top

Im sure there is a LOT of stretch and poke on that.

4sevens.com · 05-25-2012, 08:38 PM

Endless619 · 05-25-2012, 09:48 PM

Quote:

Originally Posted by 4sevens.com

Priceless.

Pcemkr · 05-26-2012, 10:40 AM

Quote:

Originally Posted by Vegas_Sirk

That has to be over the top

Im sure there is a LOT of stretch and poke on that.

Yes, but still... I think it's a 275 on 12.5"

ssabripo · 05-26-2012, 11:14 AM

Quote:

Originally Posted by TysonRa

2 months when my summer set is back up,i´ll upload some pics.
2011 e92 m3
zcp wheels
255/285
10/12mm MS spacers
H&R sport springs

Stupid winter.....

edit: btw, best thread!!!

any rubbing?

thedrknows · 05-26-2012, 12:36 PM

19x9.5 ET6 with 245/35
19x11.5 ET24 with 305/30

Very slight rubbing in the rear on sharp turns (with EDC on comfort). Front rubs fender liner a little on compression as well. Have a KW sleeve kit ready to go on.

Pcemkr · 05-26-2012, 12:54 PM

Quote:

Originally Posted by thedrknows

19x9.5 ET6 with 245/35
19x11.5 ET24 with 305/30

Very slight rubbing in the rear on sharp turns (with EDC on comfort). Front rubs fender liner a little on compression as well. Have a KW sleeve kit ready to go on.

Too aggressive for not enough low.

MienAce · 05-26-2012, 09:06 PM

Quote:

Originally Posted by TysonRa

2 months when my summer set is back up,i´ll upload some pics.
2011 e92 m3
zcp wheels
255/285
10/12mm MS spacers
H&R sport springs

Stupid winter.....

edit: btw, best thread!!!

Im sorry but stock zcp wheel is NOT aggressive.

thedrknows · 05-30-2012, 02:28 PM

Quote:

Originally Posted by Pcemkr

Too aggressive for not enough low.

Which is why I said the KW sleeve kit is sitting at home waiting to be installed. The car was only a few weeks old and I had not gotten the kit installed.

Vegas_Sirk · 05-30-2012, 03:51 PM

Quote:

Originally Posted by MienAce

Im sorry but stock zcp wheel is NOT aggressive.

Thats not a stock set up with 10 /12mm spacers .. but I agree its not super agressive as Im running 18mm F and 15mm R on my car and I think I can do another 3mm in the rear and 5mm up front.

Vegas_Sirk · 05-30-2012, 03:53 PM

Quote:

Originally Posted by thedrknows

Which is why I said the KW sleeve kit is sitting at home waiting to be installed. The car was only a few weeks old and I had not gotten the kit installed.

Looks like that rear fender is going to need a serious roll to work with that wheel and tire set up if the car is going to go any lower.

tbone28 · 05-30-2012, 05:05 PM

Quote:

Originally Posted by Vegas_Sirk

Looks like that rear fender is going to need a serious roll to work with that wheel and tire set up if the car is going to go any lower.

Will probably need a roll + pull. The camber, once lowered, will help, but those fat tires look menancing to that fender. May need to run a slight stretch

ssabripo · 05-30-2012, 05:25 PM

Quote:

Originally Posted by Vegas_Sirk

Thats not a stock set up with 10 /12mm spacers .. but I agree its not super agressive as Im running 18mm F and 15mm R on my car and I think I can do another 3mm in the rear and 5mm up front.

whoa, wait... are you running upsized tires (255f/275r)? if so, any rubbing?

Vegas_Sirk · 05-30-2012, 05:29 PM

Quote:

Originally Posted by ssabripo

whoa, wait... are you running upsized tires (255f/275r)? if so, any rubbing?

ah Im sorry I didnt see the up sized tires .... Im still running OEM size tires. My plan is to run square once I buy a 2nd set of rears so (265/35/19 all around). So in the end my set up would be:

19x10 +25 F
19x10 +25 w/ 18mm spacer R (effective offset of +7)

265/35/19 all around

sprtstr012 · 07-07-2012, 08:30 PM

Quote:

Originally Posted by Pcemkr

Yes, but still... I think it's a 275 on 12.5"

sexy

sprtstr012 · 07-07-2012, 08:32 PM

PIXXFLIX · 07-12-2012, 10:08 AM

not too crazy but pretty aggresive. 20x9.5....20x11

Digitalwok · 07-26-2012, 09:24 AM

FT: 19x10 ET25 with 265/30 lowered .8 on Eibachs
RT: 19x11 ET25 with 275/30 OEM height

I just got this done yesterday and I am not a big fan of the 275/35 on the rear. Its too stretched for my liking. I just got the rears 1 month ago and I did not want to throw $$$ out the window. I did not think it would be that bad but I was wrong...I will just ride it out

.

My thinking is that I went too aggressive on the rear for my liking. It works right now b/c of the stretch effect of using 275/35 on 11" rims but I hate that stretch look so I want to go to a 295/30 tires. I worry that I may rub/hit the fendor if I go over a bump. Right now, the rear wheel is flush with the outside edge of the fendor if not protruding a few mm. Will a 295/30 on 19x11ET25 fit?

That said, does anyone want to trade? http://www.m3post.com/forums/showpos...33&postcount=1

Here is the full link and some pics attached

05-25-2012, 04:27 PM	#157
Vegas_Sirk Its All About The Offset Drives: 2011 E90 M3 ZCP Join Date: Feb 2007 Location: Where you come to vacation and go home on probation: Vegas Posts: 3,545 iTrader: (11) Garage List 2011 BMW M3 ZCP [0.00] 2008 535xi [0.00] 2009 John Cooper Wo ... [4.75] 2007 E90 335i [0.00]	So I know some 11.5" rear set ups are running around in here, but does anyone know the offsets??? Also anyone pull of a 12" rear???? __________________ AKA M3This (changed my user name ) \| M3 Build Thread \| E61 Build Thread

05-26-2012, 12:36 PM	#164
thedrknows Lieutenant Drives: 2008 BMW M3 Coupe Join Date: Apr 2011 Location: Wherever the Army sents me Posts: 484 iTrader: (13)	19x9.5 ET6 with 245/35 19x11.5 ET24 with 305/30 Very slight rubbing in the rear on sharp turns (with EDC on comfort). Front rubs fender liner a little on compression as well. Have a KW sleeve kit ready to go on. Attached Images __________________ OLD-2008 M3 JB, HRE P40, Eisenmann Race, MXP x-pipe, VRS Diffuser, Arkym Lip, GruppeM, H&R Springs NEW-2012 M3 MR, HRE C93 (9.5"F, 11.5"R), ESS VT2-600, Eisenmann Race, MXP x-pipe w/HFC, VRS Diffuser, KW Sleeve Kit

07-12-2012, 10:08 AM	#175
PIXXFLIX Private First Class Drives: ///M Join Date: May 2012 Location: Brickell Posts: 102 iTrader: (0)	not too crazy but pretty aggresive. 20x9.5....20x11 Attached Images

07-26-2012, 09:24 AM	#176
Digitalwok Private First Class Drives: 2009 M3 IB Join Date: Jun 2011 Location: US east Posts: 103 iTrader: (0) Garage List 2010 Cervelo S3 [0.00] 2009 BMW M3 [0.00] 2010 Audi Q7 [0.00]	FT: 19x10 ET25 with 265/30 lowered .8 on Eibachs RT: 19x11 ET25 with 275/30 OEM height I just got this done yesterday and I am not a big fan of the 275/35 on the rear. Its too stretched for my liking. I just got the rears 1 month ago and I did not want to throw $$$ out the window. I did not think it would be that bad but I was wrong...I will just ride it out . My thinking is that I went too aggressive on the rear for my liking. It works right now b/c of the stretch effect of using 275/35 on 11" rims but I hate that stretch look so I want to go to a 295/30 tires. I worry that I may rub/hit the fendor if I go over a bump. Right now, the rear wheel is flush with the outside edge of the fendor if not protruding a few mm. Will a 295/30 on 19x11ET25 fit? That said, does anyone want to trade? http://www.m3post.com/forums/showpos...33&postcount=1 Here is the full link and some pics attached Attached Images Last edited by Digitalwok; 07-26-2012 at 10:14 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

05-25-2012, 08:38 PM	#160
4sevens.com Major Drives: '11 LMB e90 M3; '99 LS6 Miata Join Date: Apr 2010 Location: Atlanta, GA Posts: 1,481 iTrader: (3)

07-07-2012, 08:32 PM	#174
sprtstr012 First Lieutenant Drives: e92 SG coupe Join Date: Nov 2009 Location: rockville maryland Posts: 376 iTrader: (3)