Introduction - M3 Forum 2010 2009 BMW M3 2008 BMW M3 BMW E90 M3 E92

BimmerMan43 · 01-22-2007, 01:22 PM

What's up everyone? Just thought I'd introduce myself real quick. I've got an M3 and am still looking to gain some knowledge as to just how much power these can take. I look forward to learning some stuff from the other members here... check out my ride...

oneshare325 · 01-22-2007, 02:08 PM

Nice ride and let me be the first to say welcome! We have alot of members here with m3 (e46's) and I am sure they can help you out alot. But I would bet that as far as performance and mods m3post or m3 forum would be your best bet! Did you just get your m3?

BimmerMan43 · 01-23-2007, 02:02 PM

Yeah, I've only had it a couple of months. I've just been enjoying the ride... I just know that eventually I'm going to want to go faster.

ase2dais · 01-31-2007, 01:26 PM

Quote:

Originally Posted by oneshare325

Nice ride and let me be the first to say welcome! We have alot of members here with m3 (e46's) and I am sure they can help you out alot. But I would bet that as far as performance and mods m3post or m3 forum would be your best bet! Did you just get your m3?

+1

oneshare325 · 01-31-2007, 01:31 PM

Wow...I was just checking back on this thread and it got moved to the m3 forum, guess my original post no longer applies! Congrats again!

Helix · 03-22-2007, 08:19 AM

Depends what you mean by 'take'. I'm no expert, and all the following is 'hear-say', so entirely at your risk!

The feeling in the UK is that the chassis will take a lot extra, but the brakes are 'pants' - AP Racing is one popular mod to prevent fade, if pads matched to use. Transmission (man or SMG) is said to be strong. Engine (provided you are later than, or through, the bottom end problems) is, they say, OK for more than 500 bhp but since the standard engine is already highly tuned you need a supercharger to get there (over here there are still problems with charge cooling. I believe).

'Easy' improvements are chip and exhaust, but don't expect miracles - we are talking perhaps 10-15 bhp for the chip alone, 30-40 with exhaust too. If I did it, it would be for driveability rather than the extra power - standard is sufficient oomph for my needs.

Lex · 03-22-2007, 09:01 PM

I would check out www.dinancars.com they have everything that's factory installed @ an authorized BMW dealership. They have two different superchargers with a package of other mods good for I think 423hp for one package & 462hp for the other.Booku $$$$ though. As wel as bunch of less involved & not as costly mods.

Helix · 03-23-2007, 05:34 AM

Quote:

Originally Posted by Lex

I would check out www.dinancars.com they have everything that's factory installed @ an authorized BMW dealership. They have two different superchargers with a package of other mods good for I think 423hp for one package & 462hp for the other.Booku $$$$ though. As wel as bunch of less involved & not as costly mods.

462 bhp and 328 lb/ft sounds nice, though as you say, $25k is a lot of bread. Still, it is an impressive total package, a sensible total up-grade including brakes & suspension, plus shorter gearing, not just bolt-on power, so it seems reasonable value to an outsider.

Can you clarify re 'factory installed at authorised BMW dealership' - I presume it is Dinan's factory and warranty, not BMW's?

Kafka · 04-20-2007, 08:26 PM

I'm seriously considering putting a supercharger in my 2004 M3 (end of extra weight b/c of convertible issue for me then).

BMW would like to see me Dinan products. The positive is that my warranty will still be valid after installation. The negative is the HUGE costs.

The original product I am looking at is the vf-engineering supercharger (see http://www.vf-engineering.com/) which is about $12K (US) installed, has 3 year warranty but if something goes wrong my BMW warranty would be null and void. However, it seems like a great product and problem free. You get about 450 horsepower and torque goes up to about 330 (yes, apparently it is like flying). They are made for BMWs.

My questions is, had anyone any news from anyone who actually has installed the vp-engineering supercharger? Comments please!!!!
Thanks in advance!
K.

P.S. Check this video, made by vp-engineering for their supercharger.
/www.youtube.com/watch?v=ii16X1UqJDs

Kafka · 04-21-2007, 09:13 PM

Quote:

Originally Posted by Helix

462 bhp and 328 lb/ft sounds nice, though as you say, $25k is a lot of bread. Still, it is an impressive total package, a sensible total up-grade including brakes & suspension, plus shorter gearing, not just bolt-on power, so it seems reasonable value to an outsider.

Can you clarify re 'factory installed at authorised BMW dealership' - I presume it is Dinan's factory and warranty, not BMW's?

Thanks for the good feedback.

Let me clarify, the VF-Engineering Supercharger is $12K (US) installed and will include some new brake pads. If you have a look at their web site it includes a water/air cooler and you don't need any other mods (exhaust,etc.). All of this makes it unique. It does come with a 3 year unlimited mileage full warranty but BMW informed me it might void part of my BMW warranty coverage. However, from what I have read it product seems reliable. Still, I would some feedback from others who have knowledge of this product before dropping $12K. The owner of the shop did say I would experience some minor gas costs (not too bad as the new power doesn't really kick in until 4-5K so daily drive is ok) and to look for buying new tires more often. However, it seems a MAJOR rush.

The Dinan products (excellent product I hear-although I heard a rumor the company is struggling) can be installed by my BMW dealer (so BMW warranty is ok) but you have to make a LOT of other mods to balance the new power which means a LOT more $ than the VP product. The Dinan mods are way past my budget.

Any thoughts on the VP supercharger? If you have seen the VP video it does make it tempting - and makes your pulse quicken.

Since I'm asking for favors from the more experienced E46 M3 drivers here, I'll ask another. I'm getting new PIAA Hyper Black Super Rozza 2 rims this week with GOODYEAR EAGLE F1 DS-G3 tires. Any feedback regarding this products (yah I know, I should have asked before I put down my $)

Thanks guys.
K.

01-22-2007, 01:22 PM	#1
BimmerMan43 Member Drives: M3 Join Date: Jan 2007 Location: United States Posts: 9 iTrader: (0)	Introduction What's up everyone? Just thought I'd introduce myself real quick. I've got an M3 and am still looking to gain some knowledge as to just how much power these can take. I look forward to learning some stuff from the other members here... check out my ride...

01-22-2007, 02:08 PM	#2
oneshare325 Brigadier General Drives: E90 325i Join Date: Feb 2006 Location: Virginia, NoVA Posts: 4,191 iTrader: (11) View oneshare325's Garage	Nice ride and let me be the first to say welcome! We have alot of members here with m3 (e46's) and I am sure they can help you out alot. But I would bet that as far as performance and mods m3post or m3 forum would be your best bet! Did you just get your m3? __________________ Arctic/Gray/Alum/Step/ZPP/ZCW/Xenon Mods: Interior Xenon/Xenesis Fogs/330 Chrome Exhaust Tips/Rear fog light switch/Blacklines/Charcoal filter removal/K&N Drop in Filter/Smoked Vinyl Overlays/Blackout grill/Pearlescent Hand-Brake/Happy Robot Mod/CF Door Pillars/OEM style Trunk spoiler/CF Splitters/Smoked LED Turn Signal

01-31-2007, 01:31 PM	#5
oneshare325 Brigadier General Drives: E90 325i Join Date: Feb 2006 Location: Virginia, NoVA Posts: 4,191 iTrader: (11) View oneshare325's Garage	Wow...I was just checking back on this thread and it got moved to the m3 forum, guess my original post no longer applies! Congrats again! __________________ Arctic/Gray/Alum/Step/ZPP/ZCW/Xenon Mods: Interior Xenon/Xenesis Fogs/330 Chrome Exhaust Tips/Rear fog light switch/Blacklines/Charcoal filter removal/K&N Drop in Filter/Smoked Vinyl Overlays/Blackout grill/Pearlescent Hand-Brake/Happy Robot Mod/CF Door Pillars/OEM style Trunk spoiler/CF Splitters/Smoked LED Turn Signal

04-20-2007, 08:26 PM	#9
Kafka Private First Class Drives: E46 M3 SMG Join Date: Feb 2007 Location: Canada Posts: 65 iTrader: (0)	M3 supercharging I'm seriously considering putting a supercharger in my 2004 M3 (end of extra weight b/c of convertible issue for me then). BMW would like to see me Dinan products. The positive is that my warranty will still be valid after installation. The negative is the HUGE costs. The original product I am looking at is the vf-engineering supercharger (see http://www.vf-engineering.com/) which is about $12K (US) installed, has 3 year warranty but if something goes wrong my BMW warranty would be null and void. However, it seems like a great product and problem free. You get about 450 horsepower and torque goes up to about 330 (yes, apparently it is like flying). They are made for BMWs. My questions is, had anyone any news from anyone who actually has installed the vp-engineering supercharger? Comments please!!!! Thanks in advance! K. P.S. Check this video, made by vp-engineering for their supercharger. /www.youtube.com/watch?v=ii16X1UqJDs

01-23-2007, 02:02 PM	#3
BimmerMan43 Member Drives: M3 Join Date: Jan 2007 Location: United States Posts: 9 iTrader: (0)	Yeah, I've only had it a couple of months. I've just been enjoying the ride... I just know that eventually I'm going to want to go faster.

03-22-2007, 08:19 AM	#6
Helix Enlisted Member Drives: E46 M3CS Join Date: Mar 2007 Location: SE England Posts: 16 iTrader: (0)	Depends what you mean by 'take'. I'm no expert, and all the following is 'hear-say', so entirely at your risk! The feeling in the UK is that the chassis will take a lot extra, but the brakes are 'pants' - AP Racing is one popular mod to prevent fade, if pads matched to use. Transmission (man or SMG) is said to be strong. Engine (provided you are later than, or through, the bottom end problems) is, they say, OK for more than 500 bhp but since the standard engine is already highly tuned you need a supercharger to get there (over here there are still problems with charge cooling. I believe). 'Easy' improvements are chip and exhaust, but don't expect miracles - we are talking perhaps 10-15 bhp for the chip alone, 30-40 with exhaust too. If I did it, it would be for driveability rather than the extra power - standard is sufficient oomph for my needs.

03-22-2007, 09:01 PM	#7
Lex Private First Class Drives: 2005 325i Join Date: Mar 2007 Location: Newbury Park, CA Posts: 68 iTrader: (0)	I would check out www.dinancars.com they have everything that's factory installed @ an authorized BMW dealership. They have two different superchargers with a package of other mods good for I think 423hp for one package & 462hp for the other.Booku $$$$ though. As wel as bunch of less involved & not as costly mods.