Will 20" iForged Daytonas off a e92 335i fit an e92 M3?

TomBMW · 05-11-2010, 02:41 PM

Will 20" iForged Daytonas off a e92 335i fit an e92 M3?

I have no idea what the offsets are.

rockd · 05-11-2010, 02:43 PM

They'll definitely fit. Might want spacers to make them more flush, though.

TomBMW · 05-11-2010, 03:34 PM

Thanks for the reply

So they'll basically wont be any where near flush to the fender? What about brake clearance?

M Bliss · 05-11-2010, 05:23 PM

Without knowing offsets and widths....totally guesswork, absolutely a shot in the dark!

Once you gather that info, use an offset comparer, like this one http://www.rimsntires.com/rt_specs.jsp , to see if they work.

Good luck.

M Bliss · 05-11-2010, 05:26 PM

You will probably want to run spacers to get them looking flush and to avoid suspension and brake components.

M Bliss · 05-11-2010, 05:27 PM

Last thing - when choosing spacer width this link is really helpful.

http://www.m3post.com/forums/showthread.php?t=262054

Cheers.

05-11-2010, 02:41 PM	#1
TomBMW Second Lieutenant Drives: IB DCT e92 ///M3 Join Date: Feb 2008 Location: Miami Beach, FL Posts: 236 iTrader: (1)	Will 20" iForged Daytonas off a e92 335i fit an e92 M3? Will 20" iForged Daytonas off a e92 335i fit an e92 M3? I have no idea what the offsets are. __________________
	Tweet

05-11-2010, 03:34 PM	#3
TomBMW Second Lieutenant Drives: IB DCT e92 ///M3 Join Date: Feb 2008 Location: Miami Beach, FL Posts: 236 iTrader: (1)	Thanks for the reply So they'll basically wont be any where near flush to the fender? What about brake clearance? __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

05-11-2010, 02:43 PM	#2
rockd Drives: '11 Z4 35i M-Sport 6MT Join Date: Apr 2009 Location: San Francisco Posts: 531 iTrader: (11)	They'll definitely fit. Might want spacers to make them more flush, though.

05-11-2010, 05:23 PM	#4
M Bliss New Member Drives: 09 E92 JB Join Date: Apr 2010 Location: Vancouver, BC Posts: 9 iTrader: (0)	Without knowing offsets and widths....totally guesswork, absolutely a shot in the dark! Once you gather that info, use an offset comparer, like this one http://www.rimsntires.com/rt_specs.jsp , to see if they work. Good luck.

05-11-2010, 05:26 PM	#5
M Bliss New Member Drives: 09 E92 JB Join Date: Apr 2010 Location: Vancouver, BC Posts: 9 iTrader: (0)	You will probably want to run spacers to get them looking flush and to avoid suspension and brake components.

05-11-2010, 05:27 PM	#6
M Bliss New Member Drives: 09 E92 JB Join Date: Apr 2010 Location: Vancouver, BC Posts: 9 iTrader: (0)	Last thing - when choosing spacer width this link is really helpful. http://www.m3post.com/forums/showthread.php?t=262054 Cheers.