Fabspeed X-Pipe vs AA X-Pipe

M3OwnerHtown · 04-22-2010, 11:09 AM

Hey guys,
I'm looking into getting a an X-Pipe and wanted feedback from those who had either X-Pipe's or personnel knowledge and pro's con's between the two?

Fabspeed XPipe with Resonators verse Active Autowerke X-Pipe Gen 2
-Horsepower/Torque gains?
-Loudness/Drone?
-Any CEL?

Thanks!

J08M3 · 04-22-2010, 11:16 AM

Quote:

Originally Posted by M3OwnerHtown

Hey guys,
I'm looking into getting a an X-Pipe and wanted feedback from those who had either X-Pipe's or personnel knowledge and pro's con's between the two?

Fabspeed XPipe with Resonators verse Active Autowerke X-Pipe Gen 2
-Horsepower/Torque gains?
-Loudness/Drone?
-Any CEL?

Thanks!

comparable product.... both should come in right about the same on HP/torque. volume should be the same. AA claims to have new HFC's that don't give a CEL. Fabspeed claims no CEL too, but almost everyone has gotten one at one point or another. I have gotten a CEL twice with my Fabspeed, but it will clear itself after a few hundred miles. I think their price is a bit better than AA

powertrip · 04-22-2010, 12:19 PM

I think you should go AA; I'm a fan of their V-band connection between the HFC's and the x-pipe.

Bob MG · 04-22-2010, 01:30 PM

I had fabspeed before and it was great. replaced with Akra Evo

tomvcarter · 04-22-2010, 02:29 PM

Quote:

Originally Posted by powertrip

I think you should go AA; I'm a fan of their V-band connection between the HFC's and the x-pipe.

What is a v-band?

MasterDank · 04-22-2010, 06:21 PM

Style of clamp.... Really shouldn't be a bases of your decision

powertrip · 04-22-2010, 07:06 PM

I'll disagree with you on this one. In my experience V-bands leak less than slip-fits like the Fabspeed. Put it this way, Tial is making a GT35R turbo that is held together with V-band clamps; they wouldn't dare do that with a slip-fit due to the possibility of boost leak.

Quote:

Originally Posted by MasterDank

Style of clamp.... Really shouldn't be a bases of your decision

J08M3 · 04-22-2010, 07:41 PM

Quote:

Originally Posted by powertrip

I'll disagree with you on this one. In my experience V-bands leak less than slip-fits like the Fabspeed. Put it this way, Tial is making a GT35R turbo that is held together with V-band clamps; they wouldn't dare do that with a slip-fit due to the possibility of boost leak.

no leaks on my Fabspeed and I've had it installed for almost a year. with about 4-5K miles on it.

ee8 · 04-22-2010, 07:45 PM

Isn´t the pipe diameter different on both? That alone should make for different power outputs?

EssM3 · 04-23-2010, 04:58 PM

I am also planning to get an X pipe and HFC but not realy sure which ones to get!

anybody experienced with FabSpeed ones??!!

schnell325 · 04-23-2010, 05:07 PM

I'm quite happy with the fit and finish of my catless AA x-pipe.

While your at the x-pipe......why not add a short shift kit if you think one would benefit you.

disruptv · 04-25-2010, 08:36 AM

which one is quieter, the aa or the fabspeed? Also, any1 know which one dones less?

J08M3 · 04-25-2010, 08:43 AM

Quote:

Originally Posted by disruptv

which one is quieter, the aa or the fabspeed? Also, any1 know which one dones less?

this will have to do with your choice of muffler.

BimmerRob08 · 04-25-2010, 01:52 PM

I went with Encore, good HFC's. Only had one CEL, reset it and no problems. Good sound, excelleration. But not a fan of the clamp set up at the headers. had to use some exhaust seal to stop the air leaks. Fabspeed I think from what I've seen has a better fitting set up at the headers. Good luck!

04-22-2010, 11:09 AM	#1
M3OwnerHtown Private Drives: Coupe, Blk/Blk Join Date: Feb 2008 Location: Houston, Texas Posts: 55 iTrader: (1)	Fabspeed X-Pipe vs AA X-Pipe Hey guys, I'm looking into getting a an X-Pipe and wanted feedback from those who had either X-Pipe's or personnel knowledge and pro's con's between the two? Fabspeed XPipe with Resonators verse Active Autowerke X-Pipe Gen 2 -Horsepower/Torque gains? -Loudness/Drone? -Any CEL? Thanks!
	Tweet

04-22-2010, 12:19 PM	#3
powertrip Scared money don't make money. Drives: 2009 E92 M3 DCT Join Date: Apr 2009 Location: Irvine, CA Posts: 1,459 iTrader: (3) Garage List 2009 E92 M3 [0.00]	I think you should go AA; I'm a fan of their V-band connection between the HFC's and the x-pipe. __________________ 2009 E92 M3/DCT/Alpine White/Fox Red/Carbon Leather OE Tuned 402 whp & 303 wtq/Gintani X-pipe/MXP Axle Back/Rogue Pulley/AFE Stage 2/Cosmetics By IND & EAS HUGE THANKS: Gintani, OE Tuning, and EAS

04-23-2010, 05:07 PM	#11
schnell325 Bored at work.... Drives: '08 M3,'11 335xi Join Date: Aug 2007 Location: BC Posts: 3,400 iTrader: (5)	I'm quite happy with the fit and finish of my catless AA x-pipe. While your at the x-pipe......why not add a short shift kit if you think one would benefit you. __________________ 2008 SG E92 M3 6MT AA Stage 2 w/ Meth 2011 SG E90 335xi 6MT 2007 SG E70 X5 4.8is

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

04-22-2010, 01:30 PM	#4
Bob MG Moderating Drives: like a muppet Join Date: Oct 2009 Location: Vienna Posts: 1,738 iTrader: (0)	I had fabspeed before and it was great. replaced with Akra Evo

04-22-2010, 06:21 PM	#6
MasterDank Boats & Hoes Drives: 13 F10 M5 Sakhir Orang,Chohiba Join Date: Apr 2010 Location: K-Town HI Posts: 293 iTrader: (0)	Style of clamp.... Really shouldn't be a bases of your decision

04-22-2010, 07:45 PM	#9
ee8 Private First Class Drives: E92 M3 Join Date: Oct 2009 Location: Portugal Posts: 140 iTrader: (0) Garage List 2008 BMW M3 [3.20]	Isn´t the pipe diameter different on both? That alone should make for different power outputs?

04-23-2010, 04:58 PM	#10
EssM3 Second Lieutenant Drives: E92 M3 DCT Join Date: Feb 2010 Location: AE Posts: 254 iTrader: (2)	I am also planning to get an X pipe and HFC but not realy sure which ones to get! anybody experienced with FabSpeed ones??!!

04-25-2010, 08:36 AM	#12
disruptv Major Drives: 3M Join Date: Sep 2006 Location: ny Posts: 1,121 iTrader: (10) Garage List 09 3m [0.00]	which one is quieter, the aa or the fabspeed? Also, any1 know which one dones less?

04-25-2010, 01:52 PM	#14
BimmerRob08 Major Drives: 2008 M3, Space Gray Join Date: Mar 2008 Location: KIKR (ABQ), NM Posts: 1,144 iTrader: (0)	I went with Encore, good HFC's. Only had one CEL, reset it and no problems. Good sound, excelleration. But not a fan of the clamp set up at the headers. had to use some exhaust seal to stop the air leaks. Fabspeed I think from what I've seen has a better fitting set up at the headers. Good luck!