Macht Schnell wheel spacer reference thread

Mhirsch · 03-06-2011, 10:13 PM

Quote:

Originally Posted by david @ eas

Yes we surely do, come on by before 5PM

Sent you a PM

David, please PM me as well regarding this question about spacers and ZCP.

tlr · 03-07-2011, 05:12 AM

Quote:

Originally Posted by tlr

FYI I noticed occasional rubbing with 15mm rear spacers on my E93 19" when going over large bumps with 2 or 3 passengers, all EDC settings, top up or down. Front 18mm's seem to be fine so far.

Eek, also happening with 1 passenger, at least with EDC on comfort. Considering going down a size or two...

How bad is the occasional rub for the tires/car? It's not a pleasant noise...

tom @ eas · 03-07-2011, 01:55 PM

Quote:

Originally Posted by tlr

Eek, also happening with 1 passenger, at least with EDC on comfort. Considering going down a size or two...

How bad is the occasional rub for the tires/car? It's not a pleasant noise...

Occassional should be fine, as the POC should be on the rear fenderwell where it meets the rear bumper.

It's always best to inspect the wheelwells to be 100% sure

anthony @ eas · 03-07-2011, 07:14 PM

Before:

After:

Year/model BMW:
2009 e92 335i

Wheels/offset:
Front: 19x8.5 Miro 111 et35
Rear: 19x9.5 Miro 111 et33

Tire size:
Front:225/35-19
Rear: 255/35-19

Suspension:
Stock

Spacer size:
Front: 10mm
Rear: 12mm

B R A N D X® · 03-08-2011, 05:36 PM

eas,

Does having an aftermarket suspension change the spacer recommendation?

I ask because I see that for a ZCP car you recommend the 10mm/15mm r/f setup, but on page 7 of this thread you have photos of a Lemans Blue ZCP E90 with Eibach Pro Springs setup with 12mm/15mm?

Thanks.

tom @ eas · 03-08-2011, 06:04 PM

Quote:

Originally Posted by B R A N D X®

eas,

Does having an aftermarket suspension change the spacer recommendation?

I ask because I see that for a ZCP car you recommend the 10mm/15mm r/f setup, but on page 7 of this thread you have photos of a Lemans Blue ZCP E90 with Eibach Pro Springs setup with 12mm/15mm?

Thanks.

It can play a part - depending on ride height/stiffness as well as driving habits.

M3Fan24 · 03-10-2011, 02:51 AM

Very nice reference thread, though I have to say that last time I checked here the pictures were great, but now they are all gone(It now says: Domain Unregistered. To view, register at bit.ly/imageshack-domain)

Could you perhaps try to fix the problem?

ysv · 03-10-2011, 01:20 PM

Pic request!
Please post some pictures of 220M wheels and 10mm spacer in the back, and 5mm setup for the same track, thank you in advance.

anthony @ eas · 03-10-2011, 01:23 PM

Quote:

Originally Posted by M3Fan24

Very nice reference thread, though I have to say that last time I checked here the pictures were great, but now they are all gone(It now says: Domain Unregistered. To view, register at bit.ly/imageshack-domain)

Could you perhaps try to fix the problem?

Strange, the pictures seem to be working on all of our computers here. Anyone else experiencing this?

Quote:

Originally Posted by ysv

Pic request!
Please post some pictures of 220M wheels and 10mm spacer in the back, and 5mm setup for the same track, thank you in advance.

There are maybe a couple of cars in this thread that have a 10mm in the rear, but I don't know if anyone has done a 5mm on 220Ms.

Buschy · 03-14-2011, 01:45 PM

I might have missed it but what size is best for comp pack e90 m3 stock sus?
thanks

EAS · 03-14-2011, 04:01 PM

Quote:

Originally Posted by buschy

I might have missed it but what size is best for comp pack e90 m3 stock sus?
thanks

A lot of people have gone with the 15/12 setup for the ZCPs and have been happy with it, but we do recommend that you measure your clearance before ordering spacers as there are many variables that affects spacer sizes.

Buschy · 03-14-2011, 05:11 PM

Quote:

Originally Posted by david @ eas

A lot of people have gone with the 15/12 setup for the ZCPs and have been happy with it, but we do recommend that you recommend your clearance before ordering spacers as there are many variables that affects spacer sizes.

huh?

EAS · 03-14-2011, 05:45 PM

Quote:

Originally Posted by buschy

huh?

Meant to say measure. Original post edited.

slimflem · 04-01-2011, 04:46 PM

Quote:

Originally Posted by brandon @ eas

Before:

After front 12mm spacer application

Year/model BMW:
2008 M3 Coupe

Wheels/offset:
Front: 19" HRE

Tire size:
Front:Michelin PS2 245/45-19

Spacer size:
Front: 12mm
Rear: None

wow that paint job is F-ing sick! What's the details on that paint job? Is that a wrap??

iDRIFT · 04-02-2011, 09:55 PM

Hey , 2011 ZCP package e92 , what is an aggressive fittment I can put? Pm me I'm thinking 15 front and rear, shipped to Toronto Canada ready to order

tom @ eas · 04-03-2011, 09:13 PM

Quote:

Originally Posted by BobbyShades

Hey , 2011 ZCP package e92 , what is an aggressive fittment I can put? Pm me I'm thinking 15 front and rear, shipped to Toronto Canada ready to order

Sales questions cannot be discussed in this thread as per agreement to forum rules, this needs to remain a technical thread.

12/15mm is the recommended combo for M3s with ZCP suspension/stock tires.

iDRIFT · 04-03-2011, 10:55 PM

oh ok 12/15mm i see, meaning 15 front and rear 12?

is this as aggressive as i can get without rubbing issues?

anthony @ eas · 04-04-2011, 12:16 PM

Quote:

Originally Posted by BobbyShades

oh ok 12/15mm i see, meaning 15 front and rear 12?

is this as aggressive as i can get without rubbing issues?

Yes, 15mm in the front and 12mm in the rear. With the lower suspension and wider ZCP wheels, this is the widest set-up we would recommend if you are concerned about rubbing.

KEYON · 04-07-2011, 06:51 PM

Would 15/15 with Eibach Springs work with zero rubbing or hassle?

And can i ask why is 15/12 a popular setup? and not 15/15 or 12/12? Wouldn't you want to keep the car's same proportions? or am i missing something?

tom @ eas · 04-07-2011, 09:21 PM

Quote:

Originally Posted by BlacknRedi

Would 15/15 with Eibach Springs work with zero rubbing or hassle?

And can i ask why is 15/12 a popular setup? and not 15/15 or 12/12? Wouldn't you want to keep the car's same proportions? or am i missing something?

12/15mm is the most popular setup.

15/18mm is a bit more aggressive and will put the wheels completely flush with the fenders.

KEYON · 04-07-2011, 10:24 PM

Why do you put front ones larger and not keep the same M3 proportions?

xccess · 04-18-2011, 10:58 AM

hey I got a front 15 MM spacer and want to put in 10 MM spacer for the rear , can you tell me what size of the bolt length I will need for front and rear? Also do you have any stainless steel one ?

03-07-2011, 07:14 PM	#158
anthony @ eas BimmerPost Supporting Vendor 166 Rep 3,632 Posts Drives: R56 Cooper S Join Date: May 2009 Location: 4015 E Leaverton Court, Anahiem, CA 92807 iTrader: (0)	Before: After: Year/model BMW: 2009 e92 335i Wheels/offset: Front: 19x8.5 Miro 111 et35 Rear: 19x9.5 Miro 111 et33 Tire size: Front:225/35-19 Rear: 255/35-19 Suspension: Stock Spacer size: Front: 10mm Rear: 12mm __________________ Anthony M. \| european auto source (eas) email: anthony@europeanautosource.com · web: www.europeanautosource.com · tel 866.669.0705 · ca: 714.369.8524 x25 GET DAILY UPDATES ON OUR BLOG · FACEBOOK · YOUTUBE · FLICKR · INSTAGRAM
	Appreciate 0 Quote

03-08-2011, 05:36 PM	#159
B R A N D X® Second Lieutenant 6 Rep 213 Posts Drives: Fast Cars! Join Date: Dec 2010 Location: Raleigh, NC iTrader: (0)	eas, Does having an aftermarket suspension change the spacer recommendation? I ask because I see that for a ZCP car you recommend the 10mm/15mm r/f setup, but on page 7 of this thread you have photos of a Lemans Blue ZCP E90 with Eibach Pro Springs setup with 12mm/15mm? Thanks. __________________ -Stu- 2011 E90 ///M3 DCT ZCP \| Space Gray \| Silver Novillo \| 2011 F10 550i \| Space Gray \| Oyster & Black Nappa \| ///M Sport \| 8 Spd Auto "A toast then: To the BMW M3, the greatest all-around car in the world." -Arthur St. Antoine, Motor Trend Magazine's Editor at Large
	Appreciate 0 Quote

03-10-2011, 02:51 AM	#161
M3Fan24 ///M Powar!!! 0 Rep 27 Posts Drives: Nothing ATM :( Join Date: Jan 2011 Location: California iTrader: (0)	Very nice reference thread, though I have to say that last time I checked here the pictures were great, but now they are all gone(It now says: Domain Unregistered. To view, register at bit.ly/imageshack-domain) Could you perhaps try to fix the problem? __________________ “Speed has never killed anyone, suddenly becoming stationary… that’s what gets you.” - Jeremy Clarkson
	Appreciate 0 Quote

03-10-2011, 01:20 PM	#162
ysv Private 2 Rep 71 Posts Drives: E92 M3 Join Date: Dec 2008 Location: Moscow iTrader: (0)	Pic request! Please post some pictures of 220M wheels and 10mm spacer in the back, and 5mm setup for the same track, thank you in advance. __________________
	Appreciate 0 Quote

03-14-2011, 01:45 PM	#164
Buschy Colonel 102 Rep 2,331 Posts Drives: F80 M3 Join Date: Jul 2006 Location: Dallas/Fort Worth iTrader: (6)	I might have missed it but what size is best for comp pack e90 m3 stock sus? thanks __________________
	Appreciate 0 Quote

04-02-2011, 09:55 PM	#169
iDRIFT Lieutenant 4 Rep 399 Posts Drives: Fast! Join Date: Mar 2011 Location: N.America iTrader: (0)	Hey , 2011 ZCP package e92 , what is an aggressive fittment I can put? Pm me I'm thinking 15 front and rear, shipped to Toronto Canada ready to order
	Appreciate 0 Quote

04-03-2011, 10:55 PM	#171
iDRIFT Lieutenant 4 Rep 399 Posts Drives: Fast! Join Date: Mar 2011 Location: N.America iTrader: (0)	oh ok 12/15mm i see, meaning 15 front and rear 12? is this as aggressive as i can get without rubbing issues? Last edited by iDRIFT; 04-03-2011 at 11:33 PM. Reason: brain error
	Appreciate 0 Quote

04-07-2011, 06:51 PM	#173
KEYON Brigadier General 85 Rep 3,416 Posts Drives: '14 RS5 Join Date: May 2008 Location: LA x SD iTrader: (6) Garage List 2011 E92 M3 [4.83]	Would 15/15 with Eibach Springs work with zero rubbing or hassle? And can i ask why is 15/12 a popular setup? and not 15/15 or 12/12? Wouldn't you want to keep the car's same proportions? or am i missing something? Last edited by KEYON; 04-07-2011 at 06:59 PM.
	Appreciate 0 Quote

04-07-2011, 10:24 PM	#175
KEYON Brigadier General 85 Rep 3,416 Posts Drives: '14 RS5 Join Date: May 2008 Location: LA x SD iTrader: (6) Garage List 2011 E92 M3 [4.83]	Why do you put front ones larger and not keep the same M3 proportions?
	Appreciate 0 Quote

04-18-2011, 10:58 AM	#176
xccess Private First Class 3 Rep 101 Posts Drives: none Join Date: Feb 2010 Location: side curb iTrader: (0)	hey I got a front 15 MM spacer and want to put in 10 MM spacer for the rear , can you tell me what size of the bolt length I will need for front and rear? Also do you have any stainless steel one ?
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search