DIY: ///M Embroided Mats for RHD Cars - M3 Forum 2010 2009 BMW M3 2008 BMW M3 BMW E90 M3 E92

dar2008 · 11-29-2008, 11:13 AM

Well in the end, I gave up trying to source some embroided ///M mats for my UK spec car. It seems they are only made and sold by BMW for LHD cars,... never mind.

During my search, someone suggested some iron-on badges that you can buy on flea-bay. So I ordered some from Hong Kong costing about £1.49 each. When they arrived, I opened them and whilst the embroided bit was fine, they were embroided onto a black nylon patch that to be honest looked rather tacky on a £65k car. But then I had an idea...

Step 1, remove mats from car and thoroughly vacuum clean.

Step 2, using a pair of very sharp scissors, cut neatly around the embroided portion of the patch, to remove the nylon edging.

Step 3, place the patch on to the mat in the desired location. Cover it with a thin piece of material for protection, and then place a very hot iron on top. Keep the iron moving, but keep the pressure at the same time. You may need up to 30seconds for this. I suggest you turn the steam off from the iron.

The result? Well I'm very pleased

The embroided ///M badge actually sits into the mat, so that it looks like it was made that way.

I chose to position my badges near the centre console, so that they should receive less agravation from shoes.

Time will tell whether this is a good solution or not, but here are the pics, let me know what you think...

RRGOO7 · 11-29-2008, 11:36 AM

its looks good but i dont like how you placed it so close to the edge

Speedtrap · 11-29-2008, 03:49 PM

I like your bamboo leather - same as mine

Does the badges looks a bit frayed on the sides mate? Like its been hacked off with a blunt scissors?

montreal red · 11-30-2008, 06:47 PM

it looks great... i would have placed further away from the edge but your idea is very good indeed.

endofanera7 · 12-01-2008, 04:36 AM

Quote:

Originally Posted by RRGOO7

its looks good but i dont like how you placed it so close to the edge

+1, too close to the edge!

Otherwise, great DIY work!

MDCTFTW · 12-01-2008, 05:01 AM

Sorry, but I'd redo it. It looks weird with just the M for some reason. Here's what they really look like.

slammedm3 · 12-17-2008, 02:25 PM

Quote:

Originally Posted by MDCTFTW

Sorry, but I'd redo it. It looks weird with just the M for some reason. Here's what they really look like.

agreed!
Needs to Have the 3...M3!
and way too close to the edge!

11-29-2008, 11:13 AM	#1
dar2008 Lieutenant Drives: e93 M3 Convertible! Join Date: Mar 2008 Location: Bromley, UK Posts: 522 iTrader: (0)	DIY: ///M Embroided Mats for RHD Cars Well in the end, I gave up trying to source some embroided ///M mats for my UK spec car. It seems they are only made and sold by BMW for LHD cars,... never mind. During my search, someone suggested some iron-on badges that you can buy on flea-bay. So I ordered some from Hong Kong costing about £1.49 each. When they arrived, I opened them and whilst the embroided bit was fine, they were embroided onto a black nylon patch that to be honest looked rather tacky on a £65k car. But then I had an idea... Step 1, remove mats from car and thoroughly vacuum clean. Step 2, using a pair of very sharp scissors, cut neatly around the embroided portion of the patch, to remove the nylon edging. Step 3, place the patch on to the mat in the desired location. Cover it with a thin piece of material for protection, and then place a very hot iron on top. Keep the iron moving, but keep the pressure at the same time. You may need up to 30seconds for this. I suggest you turn the steam off from the iron. The result? Well I'm very pleased The embroided ///M badge actually sits into the mat, so that it looks like it was made that way. I chose to position my badges near the centre console, so that they should receive less agravation from shoes. Time will tell whether this is a good solution or not, but here are the pics, let me know what you think... Attached Images __________________ It's arrived, e93 M3 Convertible: M-DCT, JzB / extended BB, and most of the options.

11-29-2008, 03:49 PM	#3
Speedtrap Lieutenant Colonel Drives: 2008 E92 M3 IB/Bamboo & E83 X3 Join Date: Sep 2008 Location: London Posts: 1,805 iTrader: (0)	I like your bamboo leather - same as mine Does the badges looks a bit frayed on the sides mate? Like its been hacked off with a blunt scissors? __________________

11-30-2008, 06:47 PM	#4
montreal red chris Drives: Mel Red e92 M3 Join Date: Jun 2007 Location: montreal Posts: 8,233 iTrader: (13)	it looks great... i would have placed further away from the edge but your idea is very good indeed. __________________ 08 e92 M3: MelRed, MDrive, Exec Pack, EDC, 6MT. Mods: OEM Alu Pedals, UUC RK Knob, Alcantara Shift Boot, Custom Steering Wheel, Venture Shield, Window tints, Bastuck exhaust, Painted reflectors, Matte Black Stuff, VRS Front Lip, Mtec 4750k Angels, Custom Black 19" Advan RS, MS Air Filter. Custom Steering Wheels

12-01-2008, 05:01 AM	#6
MDCTFTW Lieutenant Colonel Drives: E92 DCT Join Date: Apr 2008 Location: Norcal Posts: 1,789 iTrader: (0)	Sorry, but I'd redo it. It looks weird with just the M for some reason. Here's what they really look like. Attached Images __________________ MDCT ... so you can drive and eat a hamburger at the same time.

11-29-2008, 11:36 AM	#2
RRGOO7 Colonel Drives: E92 M3 Join Date: Dec 2006 Location: Miami FL Posts: 2,364 iTrader: (13)	its looks good but i dont like how you placed it so close to the edge