BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read

Go Back   M3Post - BMW M3 Forum > E90/E92 M3 Technical Topics > Engine, Transmission, Exhaust, Drivetrain, ECU Software Modifications
EXXEL Distributions
Closed Thread
Thread Tools Search this Thread
      11-23-2008, 08:00 PM   #1
Brigadier General

Drives: 335i - to new owners now.
Join Date: Dec 2006
Location: California

iTrader: (0)

West Coast BMW Dyno Day results!

Well thought some of you might be interested to see the results.
Had 15 BMW's come out and 1 E55 AMG (what a beast).

Here's the results:

1. Rotaz - Procede v3.1 with intake, exhaust, 91oct, 6MT. (59 degrees at 8:15 am)

2. Slubu - SSTT, 91oct, 6mt.
300 whp
331.2 wtq

3. Down4it - JB3 tweaked 1.2 race map, all bolt ons, approx. 102oct. 6mt
417.2 whp
416.4 wtq

4.2005 AMG E55 - pulley & ecu tune, 91oct.
471 whp
512 wtq

5. Driver72 - JB3 1.0, K&N drop in, 91oct, 6AT. (71 degrees at 11:15 am)
339.1 whp
351.5 wtq

6. Jwxxx - Procede 3.1 (87% UT settings), RR Int., RR DP's, Eisenmann exhaust, 91oct, 6AT
338.7 whp
344.2 wtq

7. Rdsport323 - Jb3 1.0v, AE exhaust, 91oct, 6mt. (74 degrees at noon)
332.2 whp
350.2 wtq

8. 2e9x's - (v29.2 ecu) 1st stock then with SSTT put in
276.6 whp
291.4 wtq

301.1 whp
329.1 wtq

9. 2e9x's - (v28.0 ecu) 1st stock then with SSTT put in
279.x whp
286.x wtq

309.8 whp
336.1 wtq

10. Swift - JB3 1.1 only 91 Oct. 6MT
330.5 whp
347.1 wtq

11. onefastdoc - Procede v3.1 (90% UT settings), DCI, 96-97 Octane 6MT
365 whp
356 wtq

12. kpari09 - JB3 1.1v, DCI, 91 Oct. 6AT
346.6 whp
358.1 wtq

13. SfValley335i - PROcede v3.1 tweaked race map, all mods, 100 Oct. 6AT
413.9 whp
402.2 wtq

14. nlakind - JB2, DCI, axleback exh. (all cats in), 91 Oct. 6MT (72 degrees at 3:30 pm)
312.x whp
337.x wtq

15. mote - JB3 1.1, DCI, axleback exh. (all cats in), 95 Oct. 6MT
375.x whp
370.x wtq

16. jtechnik - JB3 1.1v, GruppeM Int. (closed lid), DP's, FMIC, exhaust, 91 Oct. 6MT (67 degrees)
359.x whp
380.x wtq
**Note on his car, the DP's were put on recently with basically no adaptation (strangely his car gained power on each of the 3 runs as if it truely was adapting to the DP's. Also Shiv agreed that the closed lid GruppeM intake was most likely restricting power up top, as his dyno graph got a bit flat and a bit bumpy above 5500 rpm. As Shiv noted you need open element intake (like DCI) in order to make above 360 rwhp on 91 Oct. We speculate with a dual cone intake (DCI) his whp would of probably been in the 380 rwhp range to compliment the torque values as others seem to have done).
Shiv did attend but brought his Gallardo not the 335i.

Stay tuned, the dyno graphs will be posted on Monday once the shop owner emails them all to me!

***Lastly on a side note for you guys on this M3post board, "Kpari09" who ran "Sticky" in his M3 was there, he no longer has the RD Sport Blackbox Xede tune in his car, he recently put in the JB3. To give you an idea the RD Xede he had in his car when he ran Sticky is equal in power to the old JB2 (which one customer had and put down 312 rwhp). Kpari09 now has the Jb3 and put down 347 rwhp. I think that's about equal to a stock M3 is it not?
That E55 AMG is awesome and Down4it and SfValley335i had awesome results too. Their cars are sick fast. Makes the average tuned only 340 rwhp 335i seem a bit slow as they easily jog away from us.

Cheers guys, maybe next time we can get a few of you guys out, we had a blast. Shiv showed up in his Gallardo too, but it wasn't an AWD dyno.
Great bunch of guys.

Last edited by Driver72; 11-23-2008 at 08:39 PM.
Appreciate 0
      11-23-2008, 08:32 PM   #2
Private First Class

Drives: 2008 E90 M3
Join Date: Aug 2008
Location: Sugar Land, Texas

iTrader: (0)

are any of those cars M3's? If not why post here?
Appreciate 0
      11-23-2008, 08:35 PM   #3
Brigadier General

Drives: 335i - to new owners now.
Join Date: Dec 2006
Location: California

iTrader: (0)

As I stated, just thought some of you guys might be interested to see what your older but littler brother cars are doing with some tunes/mods.

Oh and no, none are M3's. I invited M3 owners multiple times, nobody wanted to come.
Appreciate 0
      11-23-2008, 10:14 PM   #4

Drives: 2008 M3 6 Speed MT!
Join Date: Oct 2006
Location: Northern CA

iTrader: (0)

Impressive power, especially with the high octane and aggressive tuning! It is definitely arguable that if you are going for strictly straight-line speed and are willing to deal with the challenges of tuning, the 335i is the way to go.

I had a 335i for a year. i had the Vishnu V2 tune making probably 350 whp on 100 octane and 380 wtq. It was a lot of fun. It was replaced by an M3 because fun is magnified by feel, turn-in, sound, and instantaneous response. And glorious 4/50 warranty.

I love the fact the 335i is so tunable. The straight-line battles will continue, especially as the mods for the M3 continue to be developed. I believe the M3 makes ~370 WHP on 91 octane with just an intake and tune? With 100 octane, intake, exhaust, and tune, I predict well over 400 whp of NA power!
Driving sideways: It's not faster, but damn it's more fun!
Appreciate 0
Closed Thread


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -4. The time now is 01:54 PM.

Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.,,,,,,,,, logo and trademark are properties of BIMMERPOST