

![]() |
|
![]() |
|
![]() KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK! |
|||||||||
![]() |
|
|
Thread Tools |
| 04-29-2008, 01:18 PM | #2 |
|
Moderator
|
__________________
Be careful what you wish for...
----- Cosmetic mods: HRE P40. Brembo BBK. Eibach. HRE 540R, Escort 9500ci. BMW Performance Steering Wheel Perf. mods: See Dyno Runs ----- Copyright (c) 2008-2010 Robert R. Collins. Reposting and reprints are not permitted without explicit written permission. |
|
|
|
| 04-29-2008, 03:21 PM | #5 | |
|
Captain
![]() ![]() ![]() ![]() |
Quote:
In my 535i, it seems like the embedded tint strip was twice as light as it is on the M. It hides my suction cups pretty well. The STi was my only option as I'm in Va. |
|
![]() |
|
| 04-30-2008, 06:48 AM | #6 |
|
Major
![]() |
see the link in my sig
__________________
|
|
|
|
| 05-04-2008, 03:39 PM | #9 |
|
Brigadier General
![]() |
|
|
|
|
| 05-07-2008, 01:34 AM | #11 |
|
Private First Class
![]() |
It is a whole LOT easier if you remove the drivers side sun visor mount and clip (left and right mount points) and then the passenger side sun visor clip. the whole top then drops down and allows you to easily access the retiaining clips for the center console. Which then gives you access to all that you need to get power and ground for your Radar mount.
Kev
__________________
A happy tire is a squeeling tire.
Happiness isn't around the corner - it IS the corner! |
![]() |
|
| 11-03-2008, 01:03 AM | #13 |
|
BimmerPost Supporting Vendor
![]() |
there are two holes that you can use ... just get the right size small screw and it will be your ground ... use the green/white wire in the second connector from the left i believe to tap in ...
|
![]() |
|
![]() |
| Bookmarks |
| Thread Tools | |
|
|